Chlorophyll-a, is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the annual average of the maximum anomaly of chlorophyll-a (mg/m3) from 1998-2018. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). The chlorophyll-a average annual maximum anomaly was calculated by taking the average of the chlorophyll-a values from the 8-day time series in exceedance of the maximum monthly climatological chlorophyll-a from 1998-2018 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Time series of anomalies were calculated by quantifying the number and magnitude of events from the 8-day time series that exceed the maximum climatological monthly mean. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-chla-8d-v5-0.graph

Chlorophyll-a is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the annual average number of anomalies of chlorophyll-a (mg/m3) from 2002-2013, with values presented as fraction of a year. Monthly and 8-day 4-km (0.0417-degree) spatial resolution data were obtained from the MODIS (Moderate-resolution Imaging Spectroradiometer) Aqua satellite instrument from the NASA OceanColor website (http://oceancolor.gsfc.nasa.gov). The chlorophyll-a average annual frequency of anomalies was calculated by taking the average number of times that the 8-day time series exceeded the maximum monthly climatological chlorophyll-a value from 2002-2013 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Monthly climatologies were calculated from monthly time series using only full years over the Ocean Tipping Points (OTP) project time frame of interest (2002-2013). Time series of anomalies were calculated by quantifying the number and magnitude of events from the 8-day time series that exceed the maximum climatological monthly mean. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster.

Chlorophyll-a, is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the maximum monthly climatological mean of chlorophyll-a (mg/m3) from 1998-2018. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Monthly climatologies were calculated from monthly time series averaging for all same-months (e.g., January). Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-chla-8d-v5-0.graph

Chlorophyll-a, is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the annual average number of anomalies of chlorophyll-a (mg/m3) from 1998-2018, with values presented as fraction of a year. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). The chlorophyll-a average annual frequency of anomalies was calculated by taking the average number of times that the 8-day time series exceeded the maximum monthly climatological chlorophyll-a value from 1998-2018 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-chla-8d-v5-0.graph

Chlorophyll-a is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the standard deviation of the 8-day time series of chlorophyll-a (mg/m3) from 2002-2013. Monthly and 8-day 4-km (0.0417-degree) spatial resolution data were obtained from the MODIS (Moderate-resolution Imaging Spectroradiometer) Aqua satellite instrument from the NASA OceanColor website (http://oceancolor.gsfc.nasa.gov). The standard deviation was calculated over all 8-day chlorophyll-a data from 2002-2013 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster.

Sea surface temperature (SST) plays an important role in a number of ecological processes and can vary over a wide range of time scales, from daily to decadal changes. SST influences primary production, species migration patterns, and coral health. If temperatures are anomalously warm for extended periods of time, drastic changes in the surrounding ecosystem can result, including harmful effects such as coral bleaching. This layer represents the annual average of the maximum anomaly of SST (degrees Celsius) from 2000-2013. Three SST datasets were combined to provide continuous coverage from 1985-2013. The concatenation applies bias adjustment derived from linear regression to the overlap periods of datasets, with the final representation matching the 0.05-degree (~5-km) near real-time SST product. First, a weekly composite, gap-filled SST dataset from the NOAA Pathfinder v5.2 SST 1/24-degree (~4-km), daily dataset (a NOAA Climate Data Record) for each location was produced following Heron et al. (2010) for January 1985 to December 2012. Next, weekly composite SST data from the NOAA/NESDIS/STAR Blended SST 0.1-degree (~11-km), daily dataset was produced for February 2009 to October 2013. Finally, a weekly composite SST dataset from the NOAA/NESDIS/STAR Blended SST 0.05-degree (~5-km), daily dataset was produced for March 2012 to December 2013. The SST average annual maximum anomaly was calculated by taking the average of the annual maximum SST values in exceedance of the maximum monthly climatological SST from 2000-2013 for each pixel.

Chlorophyll-a, is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the standard deviation of the 8-day time series of chlorophyll-a (mg/m3) from 1998-2018. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). The standard deviation was calculated over all 8-day chlorophyll-a data from 1998-2018 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-chla-8d-v5-0.graph

Chlorophyll-a is a widely used proxy for phytoplankton biomass and an indicator for changes in phytoplankton production. As an essential source of energy in the marine environment, the extent and availability of phytoplankton biomass can be highly influential for fisheries production and dictate trophic structure in marine ecosystems. Changes in phytoplankton biomass are predominantly effected by changes in nutrient availability, through either natural (e.g., turbulent ocean mixing) or anthropogenic (e.g., agricultural runoff) processes. This layer represents the mean of the 8-day time series of chlorophyll-a (mg/m3) from 2002-2013. Monthly and 8-day 4-km (0.0417-degree) spatial resolution data were obtained from the MODIS (Moderate-resolution Imaging Spectroradiometer) Aqua satellite instrument from the NASA OceanColor website (http://oceancolor.gsfc.nasa.gov). The long-term mean was calculated by taking the average of all 8-day data from 2002-2013 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster.

Spectrally resolved water-leaving radiances (ocean color) and inferred chlorophyll concentration are key to studying phytoplankton dynamics at seasonal and inter-annual scales, for a better understanding of the role of phytoplankton in marine biogeochemistry; the global carbon cycle; and the response of marine ecosystems to climate variability, change, and feedback processes. Ocean color data also have a critical role in operational observation systems monitoring coastal eutrophication, harmful algal blooms, and sediment plumes. The contiguous ocean color record reached 21 years in 2018. However, it is comprised of a number of one-off missions such that creating a consistent time series of ocean color data requires merging of the individual sensors without introducing artifacts. The diffuse attenuation coefficient at 490 nm (Kd490) indicates the turbidity of the water column: i.e., how well visible light in the blue to green region of the spectrum penetrates the water column. The value of Kd490 represents the rate at which light at 490 nm is attenuated with depth. For example, a Kd490 of 0.1 per meter means that light intensity is reduced by one natural log within 10 meters of water. Thus, for a Kd490 of 0.1, one attenuation length is 10 meters. Higher Kd490 values mean shallower attenuation depths and thus higher turbidity, or lower clarity, of ocean water. This layer represents the annual average of the maximum anomaly of Kd490 (m-1) from 1998-2018. Data products generated by the Ocean Colour component of the European Space Agency (ESA) Climate Change Initiative (CCI) project. These files are 8-day 4-km composites of merged sensor products: Global Area Coverage (GAC), Local Area Coverage (LAC), MEdium Resolution Imaging Spectrometer (MERIS), Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua, Ocean and Land Colour Instrument (OLCI), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), and Visible Infrared Imaging Radiometer Suite (VIIRS). The Kd490 average annual maximum anomaly was calculated by taking the average of the Kd490 values from the 8-day time series in exceedance of the maximum monthly climatological Kd490 from 1998-2018 for each pixel. A quality control mask was applied to remove spurious data associated with shallow water, following Gove et al., 2013. Time series of anomalies were calculated by quantifying the number and magnitude of events from the 8-day time series that exceed the maximum climatological monthly mean. Nearshore map pixels with no data were filled with values from the nearest neighboring valid offshore pixel by using a grid of points and the Near Analysis tool in ArcGIS then converting points to raster. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/esa-cci-kd-8d-v5-0.graph

Sea surface temperature (SST) plays an important role in a number of ecological processes and can vary over a wide range of time scales, from daily to decadal changes. SST influences primary production, species migration patterns, and coral health. If temperatures are anomalously warm for extended periods, drastic changes in the surrounding ecosystem can result, including harmful effects such as coral bleaching. This layer represents the annual average of the maximum anomaly of SST (degrees Celsius) from 1985-2018. These SST dataset are derived from CoralTemp 5-km gap-free analyzed blended sea surface temperature over the global ocean. CoralTemp is derived from three different but related 5-km daily gap-free SST data sets and provides an internally consistent SST product that stretches from 1985 to present. 1) Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) Sea Surface Temperature Reanalysis (1985-2002). 2) Geo-Polar Blended Night-Only Sea Surface Temperature Reanalysis (2002-2016). 3) Geo-Polar Blended Night-Only Sea Surface Temperature Near Real-Time (2017 to present). The 8-day composites are generated from daily Coral Reef Watch (CRW) files by OceanWatch Central Pacific. The SST average annual maximum anomaly was calculated by taking the average of the annual maximum SST values in exceedance of the maximum monthly climatological SST from 1985-2018 for each pixel. Data source: https://oceanwatch.pifsc.noaa.gov/erddap/griddap/CRW_sst_v1_0_8day.graph