Connecticut Routes
공공데이터포털
It is derived from the Connecticut Route Segments layer, which is based on spatial information from the U.S. Bureau of Census that was published for Connecticut by the University of Connecticut, Center for Geographic Information and Analysis. The spatial information (line feature geometry) from the U.S. Bueau of Census was compiled for the year 2000 and used to create a continuous line feature for each interstate highway and route shown on the State Tourism Map 2002-2003 published by the Connecticut Department of Transportation. The Connecticut Routes layer does not include local roads, highway entrance and exit ramps, highway rest areas, exit numbers, house address, traffic direction, or traffic volume information. Features are linear and represent divided and undivided route centerlines mapped at 1:100,000 scale (1 inch = 1.578 mile).
Connecticut Railroads
공공데이터포털
Connecticut Railroads is a 1:24,000-scale, feature-based layer that includes railroad features on the U.S. Geological Survey (USGS) 7.5 minute topographic quadrangle maps for the State of Connecticut. This layer only includes features located in Connecticut. The layer is based on information from USGS topographic quadrangle maps published between 1969 and 1984 and does not represent the railroad system in Connecticut at any one particular point in time. The layer does not depict current conditions and excludes many railroads that have been built, modified, or removed since the time these topographic quadrangle maps were published. The layer includes railroad tracks, bridges, drawbridges, roundhouses, sidings, tracks, tunnels, underpasses, and stations. It does not include train schedule or track related information. Features are linear and represent railroad track centerlines. Attribute information is comprised of codes to cartographically represent (symbolize) rail features on a map. This layer was originally published in 1994. The 2005 edition includes the same rail features published in 1994, but the attribute information has been slightly modified and made easier to use.
DEEP Trails Set: Trail Access Points are point features in the Statewide Trails Database that describe where trails are accessed at trail heads, state and municipal parks and forests, or other points of departure. Trail Points of Interest are point features in the Statewide Trails Database that describe where there are scenic overlooks, bridges, river crossings or other historic or geologic sites of interest along trails. These features are directly located along trails and do not describe amenities commonly found on park grounds such as parking areas, picnic areas, and restrooms. Trail Point of Interest features are optional. Trails are line features in the Statewide Trails Database that describe the location of single and multi-use trails, access trails, connector trails, and regional trails. These features may also describe bike routes along public roads and their relationship with connecting multi-use paved trails used for walking, running, inline-skating, and bicyling, for example. Trail features describe hiking trails, nature trails, bike routes, and Americans with Disabilities Act (ADA) accessible trails such as certain walkways, boardwalks and stone dust surfaced trails. Individual trail features are described in terms of their surface type (unpaved, paved, unpaved road, paved road, etc.) and whether activities such as hiking, walking, running, inline skating, bicycling, mountain biking, motorbiking, all terraine vehicle use, snowmobiling, cross-country skiing, and horseback riding are permitted. Also indicates whether leashed or unleashed dogs are allowed. Roadway line features are optional features in the Statewide Trails Database used to place a trail system in context with nearby park roads or park entrance. They are very simple line features used to represent driveways, park roads, forest roads, and occasionally public roads on or along the public property where the trail system exists. Roadway line features are optional. They are not used for mapping bike routes. Trail line features are used for mapping bike routes.
DEEP Trails Set: Trail Access Points are point features in the Statewide Trails Database that describe where trails are accessed at trail heads, state and municipal parks and forests, or other points of departure. Trail Points of Interest are point features in the Statewide Trails Database that describe where there are scenic overlooks, bridges, river crossings or other historic or geologic sites of interest along trails. These features are directly located along trails and do not describe amenities commonly found on park grounds such as parking areas, picnic areas, and restrooms. Trail Point of Interest features are optional. Trails are line features in the Statewide Trails Database that describe the location of single and multi-use trails, access trails, connector trails, and regional trails. These features may also describe bike routes along public roads and their relationship with connecting multi-use paved trails used for walking, running, inline-skating, and bicyling, for example. Trail features describe hiking trails, nature trails, bike routes, and Americans with Disabilities Act (ADA) accessible trails such as certain walkways, boardwalks and stone dust surfaced trails. Individual trail features are described in terms of their surface type (unpaved, paved, unpaved road, paved road, etc.) and whether activities such as hiking, walking, running, inline skating, bicycling, mountain biking, motorbiking, all terraine vehicle use, snowmobiling, cross-country skiing, and horseback riding are permitted. Also indicates whether leashed or unleashed dogs are allowed. Roadway line features are optional features in the Statewide Trails Database used to place a trail system in context with nearby park roads or park entrance. They are very simple line features used to represent driveways, park roads, forest roads, and occasionally public roads on or along the public property where the trail system exists. Roadway line features are optional. They are not used for mapping bike routes. Trail line features are used for mapping bike routes.
CT Vicinity State Lines
공공데이터포털
Connecticut and Vicinity State Boundary data are intended for geographic display of state boundaries at statewide and regional levels. Use it to map and label states on a map. These data are derived from Northeastern United States Political Boundary Master layer. This information should be displayed and analyzed at scales appropriate for 1:24,000-scale data. The State of Connecticut, Department of Environmental Protection (CTDEP) assembled this regional data layer using data from other states in order to create a single, seamless representation of political boundaries within the vicinity of Connecticut that could be easily incorporated into mapping applications as background information. More accurate and up-to-date information may be available from individual State government Geographic Information System (GIS) offices. Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.)