데이터셋 상세
미국
Contours--Offshore Monterey, California
This part of DS 781 presents bathymetric contours for several seafloor maps of the Offshore of Monterey map area, California. This metadata file refers to the data included in "Contours_OffshoreMonterey.zip," which is accessible from https://doi.org/10.5066/F70Z71C8. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Hartwell, S.R., Cochrane, G.R., Golden, N.E., Watt, J.T., Davenport, C.W., Kvitek, R.G., Erdey, M.D., Krigsman, L.M., Sliter, R.W., and Maier, K.L. (S.Y. Johnson and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Monterey, California: U.S. Geological Survey Open-File Report 2016–1110, pamphlet 44 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161110. Bathymetric contours of the Offshore of Monterey map area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Monterey Bay Aquarium Research Institute (MBARI), as well as from bathymetric lidar data collected by the U.S. Army Corps of Engineers, Joint Airborne Lidar Bathymetry Center of Expertise (JALBTCX). Mapping was completed between 1998 and 2012 using a combination of 30-kHz Simrad EM-300 and 200-kHz/400-kHz Reson 7125 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHplus bathymetric sidescan-sonar systems. Bathymetric lidar mapping was completed between 2009 and 2010 for the California Coastal Mapping Project (CCMP). The mapping missions collected bathymetry data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours were generated separately from the modified 2-m and 5-m bathymetric surfaces then merged to one final contour dataset. 10-m intervals were generated in water depths shallower than 100 m, at 50-m intervals from 100 to 200 m, and at 200-m intervals in water depths deeper than 200 m. The original surface was smoothed using the Focal Mean tool in ArcGIS and a circular neighborhood with a radius of 20 to 30 m (depending on the area). The contours were generated from this smoothed surface using the ArcGIS Spatial Analyst Contour tool. The most continuous contour segments were preserved; smaller segments and isolated island polygons were excluded from the final output.
데이터 정보
연관 데이터
Backscatter [5m]--Offshore Monterey, California
공공데이터포털
This part of DS 781 presents data for the acoustic-backscatter map of the Offshore of Monterey map area, California. Backscatter data are provided as separate grids depending on resolution. This metadata file refers to the data included in "Backscatter_5m_OffshoreMonterey.zip," which is accessible from https://doi.org/10.5066/F70Z71C8. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Hartwell, S.R., Cochrane, G.R., Golden, N.E., Watt, J.T., Davenport, C.W., Kvitek, R.G., Erdey, M.D., Krigsman, L.M., Sliter, R.W., and Maier, K.L. (S.Y. Johnson and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Monterey, California: U.S. Geological Survey Open-File Report 2016–1110, pamphlet 44 p., 10 sheets, scale 1:24,000, http://dx.doi.org/10.3133/ofr20161110. The acoustic-backscatter map of the Offshore of Monterey map area in central California was generated from backscatter data collected by California State University, Monterey Bay (CSUMB) and by Monterey Bay Aquarium Research Institute (MBARI). Mapping was completed between 1998 and 2012 using a combination of multibeam echosounders including 200-kHz/400-kHz Reson 7125, 100-kHz Reson 7111, 240 kHz Reson 8101, and 30-kHz Simrad EM-300 as well as 234-kHz and 468-kHz SWATHplus bathymetric sidescan-sonar system. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).
Contours--Offshore of Ventura, California
공공데이터포털
This part of DS 781 presents data for the bathymetric contours of the Offshore of Ventura map area, California. The vector data file is included in "Contours_OffshoreVentura.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Cochrane, G.R., Golden, N.E., Phillips, E.L., Ritchie, A.C., Kvitek, R.G., Greene, H.G., Krigsman, L.M., Endris, C.A., Seitz, G.G., Gutierrez, C.I., Sliter, R.W., Erdey, M.D., Wong, F.L., Yoklavich, M.M., Draut, A.E., and Hart, P.E. (S.Y. Johnson and S.A. Cochran, eds.), 2013, California State Waters Map Series—Offshore of Ventura, California: U.S. Geological Survey Scientific Investigations Map 3254, pamphlet 42 p., 11 sheets, scale 1:24,000, https://doi.org/10.3133/sim3254. Contours of the Offshore of Ventura map area, California, were generated from bathymetry data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). Most of the offshore area was mapped by CSUMB in the summers of 2006 and 2007, using a 244-kHz Reson 8101 multibeam echosounder. The seafloor west of Ventura Harbor was mapped by the USGS in 2006 and 2010, using 117-kHz (2006) and 234.5-kHz (2010) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A smooth arithmetic mean convolution function applying a weight of one-ninth to each cell in a 3-pixel by 3-pixel matrix was then applied iteratively to the grid ten times. Following smoothing, contour lines were generated at 10-m intervals, from -10 m to -100 m, and at 50-m intervals, from -100 m to -400 m, then the contours were clipped to the boundary of the map area.
Contours--Offshore Aptos, California
공공데이터포털
This part of DS 781 presents data for the bathymetric contours for the Offshore of Aptos map area, California. The vector data file is included in "Contours_OffshoreAptos.zip," which is accessible from https://doi.org/10.5066/F7K35RQB. These data accompany the pamphlet and map sheets of Cochrane, G.R., Johnson, S.Y., Dartnell, P., Greene, H.G., Erdey, M.D, Dieter, B.E., Golden, N.E., Hartwell, S.R., Ritchie, A.C., Kvitek, r.G., Maier, K.L., Endris, C.A., Davenport, C.W., Watt, J.T., Sliter, R.W., Finlayson, D.P., and Krigsman, L.M., (G.R. Cochrane and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Aptos, California: U.S. Geological Survey Open-File Report 2016–1025, 43 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161025. 10-m interval contours of the Offshore Aptos map area, California, were generated from bathymetry data collected by the U.S. Geological Survey (USGS) and by California State University, Monterey Bay (CSUMB). Mapping was completed between 2006 and 2009 using a combination of a 244-kHz Reson 8101 multibeam echosounder and a 234-kHz SEA SWATHplus bathymetric sidescan-sonar system. The mapping missions collected bathymetry data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.
Backscatter [8101]--Offshore of Monterey, California
공공데이터포털
This part of DS 781 presents data for the acoustic-backscatter map of the Offshore of Monterey map area, California. Backscatter data are provided as separate grids depending on resolution. This metadata file refers to the data included in "Backscatter_8101_OffshoreMonterey.zip," which is accessible from https://doi.org/10.5066/F70Z71C8. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Hartwell, S.R., Cochrane, G.R., Golden, N.E., Watt, J.T., Davenport, C.W., Kvitek, R.G., Erdey, M.D., Krigsman, L.M., Sliter, R.W., and Maier, K.L. (S.Y. Johnson and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Monterey, California: U.S. Geological Survey Open-File Report 2016–1110, pamphlet 44 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161110. The acoustic-backscatter map of the Offshore of Monterey map area in central California was generated from backscatter data collected by California State University, Monterey Bay (CSUMB) and by Monterey Bay Aquarium Research Institute (MBARI). Mapping was completed between 1998 and 2012 using a combination of multibeam echosounders including 200-kHz/400-kHz Reson 7125, 100-kHz Reson 7111, 240 kHz Reson 8101, and 30-kHz Simrad EM-300 as well as 234-kHz and 468-kHz SWATHplus bathymetric sidescan-sonar system. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).
Bathymetry Hillshade [2m]--Offshore of Monterey, California
공공데이터포털
This part of DS 781 presents data for the bathymetry map of the Offshore of Monterey map area, California. Bathymetry data are provided as separate grids depending on resolution. This metadata file refers to the data included in "BathymetryHS_2m_OffshoreMonterey.zip," which is accessible from https://doi.org/10.5066/F70Z71C8. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Hartwell, S.R., Cochrane, G.R., Golden, N.E., Watt, J.T., Davenport, C.W., Kvitek, R.G., Erdey, M.D., Krigsman, L.M., Sliter, R.W., and Maier, K.L. (S.Y. Johnson and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Monterey, California: U.S. Geological Survey Open-File Report 2016–1110, pamphlet 44 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161110. The 2-m and 5-m bathymetry and shaded-relief bathymetry maps of the Offshore of Monterey map area, California, were generated from acoustic bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Monterey Bay Aquarium Research Institute (MBARI), as well as from bathymetric lidar data collected by the U.S. Army Corps of Engineers, Joint Airborne Lidar Bathymetry Center of Expertise (JALBTCX). Acoustic mapping was completed between 1998 and 2012 using a combination of 200-kHz/400-kHz Reson 7125, 100-kHz Reson 7111, 240-kHz Reson 8101, and 30-kHz Simrad EM-300 multibeam echosounders, as well as 234-kHz and 468-kHz SWATHplus bathymetric sidescan-sonar systems. Bathymetric lidar mapping was completed between 2009 and 2010 for the California Coastal Mapping Project (CCMP). These mapping missions combined to collect bathymetry data from the shoreline to beyond the limit of California’s State Waters. NOTE: The horizontal datum of this bathymetry data (NAD83) differs from the horizontal datum of other layers in this data release (WGS84).
Bathymetry Hillshade [5m]--Offshore of Monterey, California
공공데이터포털
This part of DS 781 presents data for the bathymetry map of the Offshore of Monterey map area, California. Bathymetry data are provided as separate grids depending on resolution. This metadata file refers to the data included in "BathymetryHS_5m_OffshoreMonterey.zip," which is accessible from https://doi.org/10.5066/F70Z71C8. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Hartwell, S.R., Cochrane, G.R., Golden, N.E., Watt, J.T., Davenport, C.W., Kvitek, R.G., Erdey, M.D., Krigsman, L.M., Sliter, R.W., and Maier, K.L. (S.Y. Johnson and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Monterey, California: U.S. Geological Survey Open-File Report 2016–1110, pamphlet 44 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161110. The 2-m and 5-m bathymetry and shaded-relief bathymetry maps of the Offshore of Monterey map area, California, were generated from acoustic bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Monterey Bay Aquarium Research Institute (MBARI), as well as from bathymetric lidar data collected by the U.S. Army Corps of Engineers, Joint Airborne Lidar Bathymetry Center of Expertise (JALBTCX). Acoustic mapping was completed between 1998 and 2012 using a combination of 200-kHz/400-kHz Reson 7125, 100-kHz Reson 7111, 240-kHz Reson 8101, and 30-kHz Simrad EM-300 multibeam echosounders, as well as 234-kHz and 468-kHz SWATHplus bathymetric sidescan-sonar systems. Bathymetric lidar mapping was completed between 2009 and 2010 for the California Coastal Mapping Project (CCMP). These mapping missions combined to collect bathymetry data from the shoreline to beyond the limit of California’s State Waters. NOTE: The horizontal datum of this bathymetry data (NAD83) differs from the horizontal datum of other layers in this data release (WGS84).
Contours--Offshore Santa Cruz, California
공공데이터포털
This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore Santa Cruz map area, California. The vector data file is included in "Contours_OffshoreSantaCruz.zip", which is accessible from https://doi.org/10.5066/F7TM785G. These data accompany the pamphlet and map sheets of Cochrane, G.R., Dartnell, P., Johnson, S.Y., Erdey, M.D., Golden, N.E., Greene, H.G., Dieter, B.E., Hartwell, S.R., Ritchie, A.C., Finlayson, D.P., Endris, C.A., Watt, J.T., Davenport, C.W., Sliter, R.W., Maier, K.L., and Krigsman, L.M. (G.R. Cochrane and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Santa Cruz, California: U.S. Geological Survey Open-File Report 2016-1024, pamphlet 40 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161024. 10-m interval contours of the Offshore Santa Cruz map area, California, were generated from bathymetry data collected by the U.S. Geological Survey (USGS). Mapping was completed in 2009 using a 234-kHz SWATHplus bathymetric sidescan-sonar system. The mapping mission collected bathymetry data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.
Backscatter [Swath]-- Offshore of Monterey, California
공공데이터포털
This part of DS 781 presents data for the acoustic-backscatter map of the Offshore of Monterey map area, California. Backscatter data are provided as separate grids depending on resolution. This metadata file refers to the data included in "Backscatter_Swath_OffshoreMonterey.zip," which is accessible from https://doi.org/10.5066/F70Z71C8. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Hartwell, S.R., Cochrane, G.R., Golden, N.E., Watt, J.T., Davenport, C.W., Kvitek, R.G., Erdey, M.D., Krigsman, L.M., Sliter, R.W., and Maier, K.L. (S.Y. Johnson and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Monterey, California: U.S. Geological Survey Open-File Report 2016–1110, pamphlet 44 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161110. The acoustic-backscatter map of the Offshore of Monterey map area in central California was generated from backscatter data collected by California State University, Monterey Bay (CSUMB) and by Monterey Bay Aquarium Research Institute (MBARI). Mapping was completed between 1998 and 2012 using a combination of multibeam echosounders including 200-kHz/400-kHz Reson 7125, 100-kHz Reson 7111, 240 kHz Reson 8101, and 30-kHz Simrad EM-300 as well as 234-kHz and 468-kHz SWATHplus bathymetric sidescan-sonar system. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).
Backscatter [7125]-- Offshore of Monterey, California
공공데이터포털
This part of DS 781 presents data for the acoustic-backscatter map of the Offshore of Monterey map area, California. Backscatter data are provided as separate grids depending on resolution. This metadata file refers to the data included in "Backscatter_7125_OffshoreMonterey.zip," which is accessible from https://doi.org/10.5066/F70Z71C8. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Hartwell, S.R., Cochrane, G.R., Golden, N.E., Watt, J.T., Davenport, C.W., Kvitek, R.G., Erdey, M.D., Krigsman, L.M., Sliter, R.W., and Maier, K.L. (S.Y. Johnson and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Monterey, California: U.S. Geological Survey Open-File Report 2016–1110, pamphlet 44 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161110. The acoustic-backscatter map of the Offshore of Monterey map area in central California was generated from backscatter data collected by California State University, Monterey Bay (CSUMB) and by Monterey Bay Aquarium Research Institute (MBARI). Mapping was completed between 1998 and 2012 using a combination of multibeam echosounders including 200-kHz/400-kHz Reson 7125, 100-kHz Reson 7111, 240 kHz Reson 8101, and 30-kHz Simrad EM-300 as well as 234-kHz and 468-kHz SWATHplus bathymetric sidescan-sonar system. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).
Contours--Offshore of San Gregorio, California
공공데이터포털
This part of SIM 3306 presents data for the bathymetric contours for several seafloor maps of the Offshore of San Gregorio map area, California. The vector data file is included in "Contours_OffshoreSanGregorio.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSanGregorio/data_catalog_OffshoreSanGregorio.html. These data accompany the pamphlet and map sheets of Cochrane, G.R., Dartnell, P., Greene, H.G., Watt, J.T., Golden, N.E., Endris, C.A., Phillips, E.L., Hartwell, S.R., Johnson, S.Y., Kvitek, R.G., Erdey, M.D., Bretz, C.K., Manson, M.W., Sliter, R.W., Ross, S.L., Dieter, B.E., and Chin, J.L. (G.R. Cochrane and S.A. Cochran, eds.), 2014, California State Waters Map Series—Offshore of San Gregorio, California: U.S. Geological Survey Scientific Investigations Map 3306, pamphlet 38 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/sim3306. 10-m interval contours of the Offshore of San Gregorio map area, California, were generated from bathymetry data collected by Fugro Pelagos and by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB). Mapping was completed in 2006 and 2007, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from the merged 2-m bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area.
목록