This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of San Francisco map area, California. The vector data file is included in "Contours_OffshoreSanFrancisco.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSanFrancisco/data_catalog_OffshoreSanFrancisco.html. These data accompany the pamphlet and map sheets of Cochrane, G.R., Johnson, S.Y., Dartnell, P., Greene, H.G., Erdey, M.D., Golden, N.E., Hartwell, S.R., Endris, C.A., Manson, M.W., Sliter, R.W., Kvitek, R.G., Watt, J.T., Ross, S.L., and Bruns, T.R. (G.R. Cochrane and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of San Francisco, California (ver. 1.1, June 2015): U.S. Geological Survey Open-File Report 2015–1068, pamphlet 39 p., 10 sheets, scale 1:24,000, https://dx.doi.org/10.3133/ofr20151068. 10-m interval contours of the Offshore of San Francisco map area, California, were generated from bathymetry data collected by Fugro Pelagos and by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB). Mapping was completed between 2004 and 2008, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from the merged 2-m bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.

This part of DS 781 presents data for the bathymetric contours of the Offshore of Ventura map area, California. The vector data file is included in "Contours_OffshoreVentura.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Cochrane, G.R., Golden, N.E., Phillips, E.L., Ritchie, A.C., Kvitek, R.G., Greene, H.G., Krigsman, L.M., Endris, C.A., Seitz, G.G., Gutierrez, C.I., Sliter, R.W., Erdey, M.D., Wong, F.L., Yoklavich, M.M., Draut, A.E., and Hart, P.E. (S.Y. Johnson and S.A. Cochran, eds.), 2013, California State Waters Map Series—Offshore of Ventura, California: U.S. Geological Survey Scientific Investigations Map 3254, pamphlet 42 p., 11 sheets, scale 1:24,000, https://doi.org/10.3133/sim3254. Contours of the Offshore of Ventura map area, California, were generated from bathymetry data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). Most of the offshore area was mapped by CSUMB in the summers of 2006 and 2007, using a 244-kHz Reson 8101 multibeam echosounder. The seafloor west of Ventura Harbor was mapped by the USGS in 2006 and 2010, using 117-kHz (2006) and 234.5-kHz (2010) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A smooth arithmetic mean convolution function applying a weight of one-ninth to each cell in a 3-pixel by 3-pixel matrix was then applied iteratively to the grid ten times. Following smoothing, contour lines were generated at 10-m intervals, from -10 m to -100 m, and at 50-m intervals, from -100 m to -400 m, then the contours were clipped to the boundary of the map area.

This part of DS 781 presents bathymetric contours for several seafloor maps of the Offshore of Refugio Beach, California, map area. The vector data file is included in "Contours_OffshoreRefugioBeach.zip," which is accessible from https://pubs.usgs.ov/ds/781/OffshoreRefugioBeach/data_catalog_OffshoreRefugioBeach.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Cochrane, G.R., Golden, N.E., Phillips, E.L., Ritchie, A.C., Krigsman, L.M., Dieter, B.E., Conrad, J.E., Greene, H.G., Seitz, G.G., Endris, C.A., Sliter, R.W., Wong, F.L., Erdey, M.D., Gutierrez, C.I., Yoklavich, M.M., East, A.E., and Hart, P.E. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Refugio Beach, California: U.S. Geological Survey Scientific Investigations Map 3319, pamphlet 42 p., 11 sheets, scale 1:24,000, https://doi.org/10.3133/sim3319. Contours of the Offshore of Refugio Beach, California, were generated from bathymetry data collected by the U.S. Geological Survey (USGS), by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB), and by Fugro Pelagos. The USGS conducted mapping within State waters in the summers of 2005, 2006, 2007, and 2008 using a combination of 117 kHz and 234.5 kHz SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. CSUMB conducted mapping in the summers of 2006 and 2007 using a 244 kHz Reson 8101 multibeam echosounder. Fugro Pelagos conducted multibeam mapping in 2008 using a combination of 400 kHz Reson 7125, 240 kHz Reson 8101, and 100 kHz Reson 8111 multibeam echosounders. Fugro Pelagos also conducted coastal bathymetric and topographic lidar mapping in 2009 for the U.S. Army Corps of Engineers (USACE) Joint Lidar Bathymetry Technical Center of Expertise using the SHOALS-1000T bathymetric and the Leica ALS60 topographic lidar systems. All of these mapping missions combined to collect bathymetry from the 0-m isobath to beyond the 3-nautical mile limit of California's state waters.

This part of SIM 3306 presents data for the bathymetric contours for several seafloor maps of the Offshore of San Gregorio map area, California. The vector data file is included in "Contours_OffshoreSanGregorio.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSanGregorio/data_catalog_OffshoreSanGregorio.html. These data accompany the pamphlet and map sheets of Cochrane, G.R., Dartnell, P., Greene, H.G., Watt, J.T., Golden, N.E., Endris, C.A., Phillips, E.L., Hartwell, S.R., Johnson, S.Y., Kvitek, R.G., Erdey, M.D., Bretz, C.K., Manson, M.W., Sliter, R.W., Ross, S.L., Dieter, B.E., and Chin, J.L. (G.R. Cochrane and S.A. Cochran, eds.), 2014, California State Waters Map Series—Offshore of San Gregorio, California: U.S. Geological Survey Scientific Investigations Map 3306, pamphlet 38 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/sim3306. 10-m interval contours of the Offshore of San Gregorio map area, California, were generated from bathymetry data collected by Fugro Pelagos and by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB). Mapping was completed in 2006 and 2007, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from the merged 2-m bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area.

This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore Santa Cruz map area, California. The vector data file is included in "Contours_OffshoreSantaCruz.zip", which is accessible from https://doi.org/10.5066/F7TM785G. These data accompany the pamphlet and map sheets of Cochrane, G.R., Dartnell, P., Johnson, S.Y., Erdey, M.D., Golden, N.E., Greene, H.G., Dieter, B.E., Hartwell, S.R., Ritchie, A.C., Finlayson, D.P., Endris, C.A., Watt, J.T., Davenport, C.W., Sliter, R.W., Maier, K.L., and Krigsman, L.M. (G.R. Cochrane and S.A. Cochran, eds.), 2016, California State Waters Map Series—Offshore of Santa Cruz, California: U.S. Geological Survey Open-File Report 2016-1024, pamphlet 40 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20161024. 10-m interval contours of the Offshore Santa Cruz map area, California, were generated from bathymetry data collected by the U.S. Geological Survey (USGS). Mapping was completed in 2009 using a 234-kHz SWATHplus bathymetric sidescan-sonar system. The mapping mission collected bathymetry data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.

This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of Fort Ross map area, California. The vector data file is included in "Contours_OffshoreFortRoss.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Erdey, M.D., Greene, H.G., Cochrane, G.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Watt, J.T., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series--Offshore of Fort Ross, California: U.S. Geological Survey Open-File Report 2015–1211, pamphlet 37 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151211. 10-m interval contours of the Offshore of Fort Ross map area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California State Waters. Bathymetric contours at 10-m intervals were generated from a bathymetric surface model. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.

This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of Point Reyes map area, California. The vector data file is included in "Contours_PointReyes.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshorePointReyes/data_catalog_PointReyes.html. These data accompany the pamphlet and map sheets of Watt, J.T., Dartnell, P., Golden, N.E., Greene, H.G., Erdey, M.D., Cochrane, G.R., Johnson, S.Y., Hartwell, S.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Sliter, R.W., Krigsman, L.M., Lowe, E.N., and Chin, J.L. (J.T. Watt and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Point Reyes, California: U.S. Geological Survey Open-File Report 2015–1114, pamphlet 39 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151114. 10-m interval contours of the Offshore of Point Reyes map area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from a bathymetric surface model. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.

This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of Santa Barbara map area, California. The vector data file is included in "Contours_OffshoreSantaBarbara.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSantaBarbara/data_catalog_OffshoreSantaBarbara.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Cochrane, G.R., Golden, N.E., Phillips, E.L., Ritchie, A.C., Greene, H.G., Krigsman, L.M., Kvitek, R.G., Dieter, B.E., Endris, C.A., Seitz, G.G., Sliter, R.W., Erdey, M.E., Gutierrez, C.I., Wong, F.L., Yoklavich, M.M., Draut, A.E., Hart, P.E., and Conrad, J.E. (S.Y. Johnson and S.A. Cochran, eds.), 2013, California State Waters Map Series—Offshore of Santa Barbara, California: U.S. Geological Survey Scientific Investigations Map 3281, 45 p., 11 sheets, scale 1:24,000, https://doi.org/10.3133/sim3281. Contours of the Offshore of Santa Barbara map area, California, were generated from bathymetry data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB), by the U.S. Geological Survey (USGS), and by Fugro Pelagos for the U.S. Army Corps of Engineers (USACE) Joint Lidar Bathymetry Technical Center of Expertise. Most of the offshore area was mapped by CSUMB in the summer of 2007, using a 244-kHz Reson 8101 multibeam echosounder. Smaller areas in the far-east nearshore, as well as further offshore to the west and in the southeast outer shelf area, were mapped by the USGS in 2005 and 2006, using a combination of 468-kHz (2005) and 117-kHz (2006) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. The nearshore bathymetry and coastal topography were mapped for USACE by Fugro Pelagos in 2009, using the SHOALS-1000T bathymetric-lidar and Leica ALS60 topographic-lidar systems. All these mapping missions combined to collect bathymetry from the 0-m isobath to beyond the 3-nautical-mile limit of California's State Waters. A smooth arithmetic mean convolution function that assigns a weight of one-ninth to each cell in a 3-pixel by 3-pixel matrix was then applied iteratively to the grid ten times. Following smoothing, contour lines were generated at 10-m intervals, then the contours were clipped to the boundary of the map area.

This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of Pacifica map area, California. The vector data file is included in "Contours_OffshorePacifica.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshorePacifica/data_catalog_OffshorePacifica.html. These data accompany the pamphlet and map sheets of Edwards, B.D., Phillips, E.L., Dartnell, P., Greene, H.G., Bretz, C.K., Kvitek, R.G., Hartwell, S.R., Johnson, S.Y., Cochrane, G.R., Dieter, B.E., Sliter, R.W., Ross, S.L., Golden, N.E., Watt, J.T., Chin, J.L., Erdey, M.D., Krigsman, L.M., Manson, M.W., and Endris, C.A. (S.A. Cochran and B.D. Edwards, eds.), 2014, California State Waters Map Series—Offshore of Pacifica, California: U.S. Geological Survey Open-File Report 2014–1260, pamphlet 38 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20141260. 10-m interval contours of the Offshore of Pacifica map area, California, were generated from bathymetry data collected by Fugro Pelagos and by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB). Mapping was completed between 2005 and 2007, using a combination of 400-kHz Reson 7125 and 244-kHz Reson 8101 multibeam echosounders. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from the merged 2-m bathymetric surface. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.

This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of Tomales Point map area, California. The vector data file is included in "Contours_OffshoreTomalesPoint.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreTomalesPoint/data_catalog_OffshoreTomalesPoint.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Greene, H.G., Erdey, M.D., Cochrane, G.R., Watt, J.T., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Tomales Point, California: U.S. Geological Survey Open-File Report 2015–1088, pamphlet 38 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151088. 10-m interval contours of the Offshore of Tomales Point map area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by the U.S. Geological Survey. Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Bathymetric contours at 10-m intervals were generated from a bathymetric surface model. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. Contours were smoothed via a polynomial approximation with exponential kernel (PAEK) algorithm using a tolerance value of 60 m. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.