This record refers to reef fish data collected on the 2004 cruise to Navassa Island National Wildlife Refuge. The random point count method (Bohnsack-Bannerot 1986) was used and parameters collected include 1) sample information (latitude-longitude, depth, date, observer, time, visibility); fish species (numbers and size ranges); and 3) habitat information (percent benthic cover, bottom type, and rugosity).

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20110407 to 20110509, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1101 in the Marianas region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 5 REA sites were surveyed at Alamagan in the Marianas region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

Towed-diver surveys (aka. Towboard surveys) are conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. These cruises support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems. 3 towboard surveys (6.8533 km in length), were conducted at Santa Rosa Bank in the Marianas Archipelago from 3 - 9 October 2005 as part of RAMP Cruise OES0512. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the fish biomass observations.

Benthic and habitat data collected on the 2004 cruise to Navassa Islands National Wildlife Refuge. Parameters include benthic cover, coral disease prevalence, location of fishing gear, coral density and sizes. Data were collected in situ by divers, some using digital cameras. Fishing gear locations were determined visually from boat transects.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 5 April - 14 April 2009, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HI0902 in the Marianas Archipelago at biennial intervals by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 14 REA sites were surveyed at Tinian Island in the Marianas Archipelago. At the specific REA sites, fish biologists along with coral biologists, algal biologists and marine invertebrate zoologist entered the water and conducted a fine-scale (~300 m2) and high degree of taxonomic resolution REA survey to assess and monitor species composition, abundance, percent cover, size distribution, diversity, and general health of fish, corals, macro-invertebrates, and algae in shallow-water (< 35 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density [# fish 100 m-2] and biomass density [kg 100 m-2]) of diurnally active reef fish assemblages. Three complementary noninvasive underwater survey methods were used, including belt-transect, stationary point count, and roving-diver surveys. For all methods, fish were identified at the species level, when possible, and assigned to a size bin ranging from 1 to 200 cm based on a visual estimate of total fish length. Belt-transect (BLT) surveys were used to quantify the entire diurnal fish community (all size classes). In belt-transect surveys, two fish biologists swam side-by-side along three consecutively-placed, 25m transect lines. The BLT team swam each transect two times. During the initial swim-out, each fish diver recorded all fish larger than 20 cm observed within a 4-m wide belt perpendicular to their respective side of the transect (200 m2 area per line, 100 m2 per diver). On the return swim, each fish diver recorded all fish less than 20 cm observed within a 2-m wide belt (100 m2 area per line, 50 m2 per diver). The survey of large fish took approximately 5 min to complete while the survey of smaller fish took about 10 min to complete. All reef-associated fish, including those in the water column (including planktivores), were counted. Any coastal pelagic species (e.g., clupeids [sardines], belonids [beakfish], antherinids [silversides]) seen near the surface were not recorded. The stationary point count (SPC) method were used to quantify larger, more mobile reef fish species that can be missed on belt-transect surveys. In stationary point count survey, a fish biologist swam approximately 15 m away from a transect line concurrently being surveyed by the other two BLT fish biologists. The SPC biologist then recorded all fish greater than 25 cm in length that passed within a visually estimated 20-m diameter cylinder centered on the diver's fixed position (10-m radius, total area = 314 m2). The survey time for each stationary point count survey was 5 min and a total of four stationary point count surveys were conducted at each REA site. Roving-diver surveys were followed belt-transect and stationary point count surveys. As diver bottom time permitted, the fish assessment team conducted random swim surveys throughout the REA site area, recording, to the species level or the lowest recognizable taxon, the presence of reef fish not encountered during previous methods.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20110407 to 20110509, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1101 in the Marianas region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 30 REA sites were surveyed at Saipan in the Marianas region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20100904 to 20100929, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1007 in the Northwestern Hawaiian Islands region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 27 REA sites were surveyed at French Frigate in the Northwestern Hawaiian Islands region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20110407 to 20110509, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1101 in the Marianas region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 19 REA sites were surveyed at Tinian in the Marianas region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally two stationary point count surveys (one per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

This project is a cooperative effort among the National Ocean Service, National Centers for Coastal Ocean Science, Center for Coastal Monitoring and Assessment; the University of Hawaii; BAE Systems Spectral Solutions; and Analytical Laboratories of Hawaii, LLC. The goal of the work was to incorporate previously developed mapping methods to produce coral reef habitat maps for American Samoa, Guam and the Commonwealth of the Northern Mariana Islands. GPS field observations were used to establish the thematic accuracy of this thematic product. 1113 benthic habitat characterizations were completed for this work.