This data set consists of digital polygons of constant hydraulic conductivity values for the High Plains aquifer in Oklahoma. This area encompasses the panhandle counties of Cimarron, Texas, and Beaver, and the western counties of Harper, Ellis, Woodward, Dewey, and Roger Mills. The High Plains aquifer underlies approximately 7,000 square miles of Oklahoma and is used extensively for irrigation. The High Plains aquifer is a water-table aquifer and consists predominately of the Tertiary-age Ogallala Formation and overlying Quaternary-age alluvial and terrace deposits. In some areas the aquifer is absent and the underlying Triassic, Jurassic, or Cretaceous-age rocks are exposed at the surface. These rocks are hydraulically connected with the aquifer in some areas. The High Plains aquifer is composed of interbedded sand, siltstone, clay, gravel, thin limestones, and caliche. The proportion of various lithological materials changes rapidly from place to place, but poorly sorted sand and gravel predominate. The rocks are poorly to moderately well cemented by calcium carbonate. The High Plains aquifer was divided into three zones with each zone having an assigned hydraulic conductivity that was used as input to a ground-water flow model on the High Plains aquifer. These values are 8.3 feet per day for the west zone, 16.2 feet per day for the central zone, and 19.3 feet per day for the east zone. The polygon boundaries and constant hydraulic conductivity values were constructed by extracting lines from digital surficial geology data sets based on a scale of 1:125,000 for the panhandle counties and 1:250,000 for the western counties. Some of the lines were digitized from maps in a published water-level elevation map for 1980. Ground-water flow models are numerical representations that simplify and aggregate natural systems. Models are not unique; different combinations of aquifer characteristics may produce similar results. Therefore, values of hydraulic conductivity used in the model and presented in this data set are not precise, but are within a reasonable range when compared to independently collected data.

This data set consists of digitized water-level elevation contours for the High Plains aquifer in western Oklahoma. This area encompasses the panhandle counties of Cimarron, Texas, and Beaver, and the western counties of Harper, Ellis, Woodward, Dewey, and Roger Mills. The High Plains aquifer underlies approximately 7,000 square miles of Oklahoma and is used extensively for irrigation. The High Plains aquifer is a water-table aquifer and consists predominately of the Tertiary-age Ogallala Formation and overlying Quaternary-age alluvial and terrace deposits. In some areas the aquifer is absent and the underlying Triassic, Jurassic, or Cretaceous-age rocks are exposed at the surface. These rocks are hydraulically connected with the aquifer in some areas. The High Plains aquifer is composed of interbedded sand, siltstone, clay, gravel, thin limestones, and caliche. The proportion of various lithological materials changes rapidly from place to place, but poorly sorted sand and gravel predominate. The rocks are poorly to moderately well cemented by calcium carbonate. The water-level elevations were measured in January, February, and March 1980 and ranged from about 4,650 feet above sea level in Cimarron County to about 2,000 feet above sea level in Woodward County. The water-level elevation contours were digitized from folded paper maps in a published report. The source maps were published at a scale of 1:250,000.

This data set consists of digitized water-level elevation contours for the High Plains aquifer in western Oklahoma. This area encompasses the panhandle counties of Cimarron, Texas, and Beaver, and the western counties of Harper, Ellis, Woodward, Dewey, and Roger Mills. The High Plains aquifer underlies approximately 7,000 square miles of Oklahoma and is used extensively for irrigation. The High Plains aquifer is a water-table aquifer and consists predominately of the Tertiary-age Ogallala Formation and overlying Quaternary-age alluvial and terrace deposits. In some areas the aquifer is absent and the underlying Triassic, Jurassic, or Cretaceous-age rocks are exposed at the surface. These rocks are hydraulically connected with the aquifer in some areas. The High Plains aquifer is composed of interbedded sand, siltstone, clay, gravel, thin limestones, and caliche. The proportion of various lithological materials changes rapidly from place to place, but poorly sorted sand and gravel predominate. The rocks are poorly to moderately well cemented by calcium carbonate. The water-level elevations were measured in January, February, and March 1980 and ranged from about 4,650 feet above sea level in Cimarron County to about 2,000 feet above sea level in Woodward County. The water-level elevation contours were digitized from folded paper maps in a published report. The source maps were published at a scale of 1:250,000.

This data set consists of digitized aquifer boundaries created for a previously published report about the Central Oklahoma aquifer in central Oklahoma. This area encompasses all or part of Cleveland, Lincoln, Logan, Oklahoma, Payne, and Pottawatomie Counties. The Central Oklahoma aquifer includes the alluvial and terrace deposits along major streams, the Garber Sandstone and Wellington Formations, and the Chase, Council Grove, and Admire Groups. The Quaternary-age alluvial and terrace deposits consist of unconsolidated clay, silt, sand, and gravel. The Permian-age Garber Sandstone and Wellington Formations consist of sandstone with interbedded siltstone and mudstone. The Permian-age Chase, Council Grove, and Admire Groups consist of sandstone, shale, and thin limestone. The Central Oklahoma aquifer underlies about 3,000 square miles of central Oklahoma where the aquifer is used extensively for municipal, industrial, commercial, and domestic water supplies. Most of the usable ground water within the aquifer is from the Garber Sandstone and Wellington Formations. Substantial quantities of usable ground water also are present in the Chase, Council Grove, and Admire Groups, and in alluvial and terrace deposits associated with the major streams.

This data set consists of digitized polygons of a constant recharge value for the Central Oklahoma aquifer in central Oklahoma. This area encompasses all or part of Cleveland, Lincoln, Logan, Oklahoma, Payne, and Pottawatomie Counties. The Central Oklahoma aquifer includes the alluvial and terrace deposits along major streams, the Garber Sandstone and Wellington Formations, and the Chase, Council Grove, and Admire Groups. The Quaternary-age alluvial and terrace deposits consist of unconsolidated clay, silt, sand, and gravel. The Permian-age Garber Sandstone and Wellington Formations consist of sandstone with interbedded siltstone and mudstone. The Permian-age Chase, Council Grove, and Admire Groups consist of sandstone, shale, and thin limestone. The recharge data set was created from digital data sets developed to produce a map for a previously published report. Most of the recharge to the Central Oklahoma aquifer is infiltration of precipitation through outcrops of the Garber Sandstone and Wellington Formations, the Chase, Council Grove, and Admire Groups, and the alluvial and terrace deposits. The median recharge to the aquifer is 1.61 inches per year.