데이터셋 상세
미국
Current direction, bathythermograph (xbt), CTD, and other data from moored current meter casts and other instruments in the Gulf of Mexico as part of the Gulf of Mexico Physical Oceanography (GMPO) project, 1987-04-04 to 1988-11-02 (NCEI Accession 8900259)
Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from April 4, 1987 to November 2, 1988. Data were submitted by Science Applications, INC - Raleigh NC as part of the Gulf of Mexico Physical Oceanography (GMPO) project. Data has been processed by NODC to the NODC standard F015- Current Meter Data, F022- CTD High Resolution, C100- Ocean Station Data, and C116/118- Bathythermograph XBT formats. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t), sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature
데이터 정보
연관 데이터
Current direction and bathythermograph (xbt) data from moored current meter casts and other instruments in the Gulf of Mexico, Northwest Atlantic Ocean, and North American Coastline-South as part the North Carolina Frontal Eddy Dynamics Experiment (FRED) project, 1985-01-23 to 1987-01-31 (NCEI Accession 8900214)
공공데이터포털
Current direction and bathythermograph (xbt) data were collected using moored current meter casts and other instruments in the Gulf of Mexico, Northwest Atlantic Ocean, and North American Coastline-South from January 23, 1985 to January 31, 1987. Data were submitted by Science Applications, INC - Raleigh NC as part of the North Carolina Frontal Eddy Dynamics Experiment (FRED) project. Data has been processed by NODC to the NODC standard F015- Current Meter Data and C116- Bathythermograph XBT formats. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The C116 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.
Current direction and temperature data from moored current meter casts in the Gulf of Mexico from 1979-06-13 to 1979-07-03 (NCEI Accession 8200134)
공공데이터포털
Current direction and temperature data were collected using moored current meter casts in the Gulf of Mexico from June 13, 1979 to July 3, 1979. Data were submitted by National Ocean Service (NOS). Data were processed by NODC to the NODC standard Current Meter Data (F005) format. The F005 format is used for time series measurements of ocean currents obtained using moored current-measuring instruments, principally Aanderaa current meters (manufactured by Aanderaa Instruments Inc.). These data represent the Eulerian method of current measurement, i.e., the meters are deployed at a fixed mooring point and measure flow past the sensor. Position, water depth, and sensor depth are reported for each station. The data record comprises values of current direction and speed at specified date and time. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Other environmental parameters may also be reported. These include: water temperature, salinity, conductivity, and transmissivity; wind direction and speed; and dominant wave direction, height, and period. A text field is available for optional comments.
Current meter data from moored current meter in the Gulf of Mexico as part of the Gulf of Mexico Physical Oceanography project from 1984-05-05 to 1989-05-18 (NCEI Accession 8900258)
공공데이터포털
Data consists of Acoustic Doppler Current Profiles recorded in NODC'S F004 format. The data were collected using an Ametek-Straza instrument aboard the R/V CAPE FLORIDA, cruise no. CF-8405 in May 1984. These data were collected by the University of Miami in the Gulf of Mexico and its part of years 1 and 2 of SAIC'S Mineral Management Service (MMS) sponsored Gulf of Mexico Physical Oceanography Program. This program was funded under MMS contract number 14-12-0001-29158. The data were recorded in ASCII format and submitted by Dr. Evans Waddell. The F004 format is used for data from measurements and analyses of physical and chemical characteristics of the water column. Among chemical parameters that may be recorded are salinity, pH, and concentration of oxygen, ammonia, nitrate, phosphate, chlorophyll, and suspended solids. Physical parameters that may be recorded include temperature, density (sigma-t), transmissivity, and current velocity (east-west and north-south components). Cruise and station information, including environmental conditions of the study site at the time of observations, is also included.
Current components, physical, and other data from moored current meters and CTD casts from the J. W. POWELL and other platforms from the Gulf of Mexico as part of the Texas-Louisiana Shelf Circulation and Transport Processes Study (LATEX PART A) from 1993-03-17 to 1993-05-28 (NCEI Accession 9400043)
공공데이터포털
Current components, physical, and other data were collected by moored current meters and CTD casts from the J. W. POWELL and other platforms from the Gulf of Mexico from 17 March 1993 to 28 May 1993. Data were collected by Texas A&M University (TAMU) as part of the Texas-Louisiana Shelf Circulation and Transport Processes Study (LATEX PART A). Data has been processed by NODC to the standard NODC F015-Current Meter Data (Components) and the F022-CTD High Resolutions formats. This F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.
Current direction, bathythermograph, CTD, and other data from moored current meter casts and other instruments in the Mid-Atlantic Bight and NW Atlantic during the Mid-Atlantic Shelf project from 1984-02-26 to 1986-05-08 (NCEI Accession 8700196)
공공데이터포털
Current direction, bathythermograph (XBT), CTD, and other data were collected using moored current meter casts and other instruments in the Mid-Atlantic Bight and NW Atlantic (limit-40 W) from February 26, 1984 to May 8, 1986. Data were submitted by Science Applications, INC. - Raleigh NC as part of the MMS funded Mid-Atlantic Slope And Rise experiment (MASAR). Data has been processed by NODC to the NODC standard F004- Water Physics and Chemistry, F015- Current Meter Data, F022- CTD High Resolution, and C116- Bathythermograph XBT formats. The F004 format is used for data from measurements and analyses of physical and chemical characteristics of the water column. Among chemical parameters that may be recorded are salinity, pH, and concentration of oxygen, ammonia, nitrate, phosphate, chlorophyll, and suspended solids. Physical parameters that may be recorded include temperature, density (sigma-t), transmissivity, and current velocity (east-west and north-south components). Cruise and station information, including environmental conditions of the study site at the time of observations, is also included. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. The C116 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.
Current meter data from moored current meter casts in the Gulf of Mexico as part of the Ocean Thermal Energy Conversion (OTEC) project from 1977-10-18 to 1979-07-01 (NCEI Accession 8000284)
공공데이터포털
Current meter data were collected using moored current meter casts in the Gulf of Mexico from October 18, 1977 to June 1, 1979. Data were submitted by Atlantic Oceanographic Meteorological Laboratory - Miami, FL (AOML) as part of the Ocean Thermal Energy Conversion (OTEC) project. Data were processed by NODC to the NODC standard Current Meter Data (F015) format. The F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments.
CTD, XBT, and other data from GYRE in the Gulf of Mexico from 1992-09-26 to 1992-10-31 (NCEI Accession 9200302)
공공데이터포털
The Conductivity, Temperature and Depth (CTD) and Water Depth and Temperature Bathythermograph (XBT) data were collected in Gulf of Mexico as part of Texas Institutions Gulf Ecosystem Research (TIGER) project funded by grant no MMS # 14-35-0001-30501. Data was collected from Ship GYRE cruises 92G09, 92G10 and 92G13. The data was collected over a period spanning from September 26, 1992 to October 31, 1992. Data was submitted in two diskettes by Dr. Douglas C. Biggs, Texas A&M University, College Station, TX. The originator's data containing 32 CTD observations; 52 stations and 12,860 records has been processed. CTD data is available in F022-CTD-Hi Resolution file format of NODC. The originator's bathythermograph (XBT) data has been converted and are now available on line in C116 (XBT) file format of NODC. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.
WATER TEMPERATURE and other data from PURITAN in the Gulf of Mexico from 1988-10-05 to 1989-09-20 (NCEI Accession 8900279)
공공데이터포털
Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.
WATER TEMPERATURE and other data from PETER W. ANDERSON in the Gulf of Mexico from 1987-02-24 to 1987-05-15 (NCEI Accession 8700240)
공공데이터포털
Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.
WATER TEMPERATURE and other data from PURITAN in the Gulf of Mexico from 1988-04-05 to 1988-08-04 (NCEI Accession 8800265)
공공데이터포털
Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.
목록