The data in this release map the beach and nearshore environment at Head of the Meadow Beach in Truro, MA and provide environmental context for the camera calibration information for the 2019 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2020-015-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of the CoastCam, which are two video cameras aimed at the beach. On March 4, 6, and 10, 2020, U.S Geological Survey and Woods Hole Oceanographic Institution (WHOI) scientists conducted field surveys to collect position and orientation information for the CoastCam cameras and map the field of view. Elevation data were collected using a real time kinematic – satellite navigation system (RTK-GNSS) receiver attached to a pole and walked on the beach. Point data of the beach face were collected along transects and at periodic locations of plywood targets moved throughout the day within the CoastCam view. Grain-size analysis was performed on sediment samples collected with a spade along multiple profiles from the bluff base to the intertidal zone. Images of the beach were taken with a camera (Ricoh GRII) and a post-processed kinematic (PPK) system attached to a kitesurfing kite, and high-precision targets (AeroPoints) were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous survey vehicle. Agisoft Metashape (v. 1.6.1) was used to create a digital elevation model with the collected imagery and this was merged with the bathymetry in MatLab (v. 2020) to create a continuous topobathy product.

The data in this release map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. In March 2022, U.S Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to map the CoastCam field of view. Aerial images of the beach for use in structure from motion were taken with a camera (Sony a6000) and a post-processed kinematic (PPK) system attached to a helium filled balloon-kite (Helikite). High-precision GPS targets (AeroPoints) and numbered black and white tarps were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 1.8.1) was used to create a digital surface model with the collected imagery, which was merged with the bathymetry in MATLAB (v. 2020b) to create a continuous topobathy product.

The data in this release map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. In March 2022, U.S Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to map the CoastCam field of view. Aerial images of the beach for use in structure from motion were taken with a camera (Sony a6000) and a post-processed kinematic (PPK) system attached to a helium filled balloon-kite (Helikite). High-precision GPS targets (AeroPoints) and numbered black and white tarps were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 1.8.1) was used to create a digital surface model with the collected imagery, which was merged with the bathymetry in MATLAB (v. 2020b) to create a continuous topobathy product.

The data in this release re-map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2024-016-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of two video cameras aimed at the beach (CoastCam CACO-02). In March and April 2024, U.S. Geological Survey and Woods Hole Oceanographic Institution (WHOI) scientists conducted field surveys to collect topographic and bathymetric data. A camera (Ricoh GRII) attached to a helium filled balloon-kite (Helikite) took images of the beach for use in structure-from-motion. High-precision GPS targets (AeroPoints V2) were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 2.1.0) was used to create a digital surface model and orthomosaic with the collected imagery.

The data in this release re-map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. In March 2023, U.S. Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to collect topographic and bathymetric data. Images of the beach for use in structure-from-motion were taken with a camera (SONY a6000) and a post-processed kinematic (PPK) system attached to a helium powered balloon-kite (Helikite). High-precision GPS targets (AeroPoints) and numbered black and white tarps were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous surface vehicle. Agisoft Metashape (v. 1.8.1) was used to create a digital surface model and orthomosaic with the collected imagery.

The objectives of the survey were to provide bathymetric and sidescan sonar data for sediment transport studies and coastal change model development for ongoing studies of nearshore coastal dynamics along Sandwich Town Neck Beach, MA. Data collection equipment used for this investigation are mounted on an unmanned surface vehicle (USV) uniquely adapted from a commercially sold gas-powered kayak and termed the "jetyak". The jetyak design is the result of a collaborative effort between USGS and Woods Hole Oceanographic Institution (WHOI) scientists.

These data map the beach and nearshore environment at Head of the Meadow Beach in Truro, MA, providing updated regional context for the 2019 CoastCam installation. CoastCam CACO-01 are two video cameras aimed at the beach that view the coast shared by beachgoers, shorebirds, seals, and sharks. These data were collected as part of field activity 2021-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region. In February 2021, U.S. Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to re-map the field of view of the CoastCam. Aerial images of the beach for use in structure from motion were taken with a camera (Ricoh GRII) and a post-processed kinematic (PPK) system attached to a helium powered balloon-kite (Helikite). High-precision GPS targets (AeroPoints) were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous Small Surf Vehicle (SSV). Agisoft Metashape (v. 1.7.2) was used to create a digital elevation model with the collected imagery and this was merged with the bathymetry in MATLAB (v. 2020) to create a continuous topobathy product.

The data in this publication map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide regional context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. These data were collected as part of field activity 2021-022-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the beach. Starting in February and ending in March 2021, U.S Geological Survey and Woods Hole Oceanographic Institute (WHOI) scientists conducted field surveys to collect position and orientation information for the CoastCam cameras and map the field of view. Two new reference marks were established in the Marconi Beach parking area to establish ground control for future surveys. Elevation data were collected using a real time kinematic – satellite navigation system (RTK-GNSS) receiver attached to a pole and walked on the beach. Point data of the beach face were collected along transects. Grain-size analysis was performed on sediment samples collected with a spade along multiple profiles from the bluff base to the intertidal zone. Aerial images of the beach for use in Structure-from-Motion were taken with a camera (Ricoh GRII) and a post-processed kinematic (PPK) system attached to a helium powered balloon-kite (Helikite) and high-precision GPS targets (AeroPoints) were used as ground control points. Bathymetry was collected in the nearshore using a single-beam echosounder mounted on a surf capable self-righting electric autonomous survey vehicle. Agisoft Metashape (v. 1.7.2) was used to create a digital elevation model with the collected imagery and this was merged with the bathymetry in MATLAB (v. 2020) to create a continuous topobathy product.

In 2002 and 2003, the U.S. Geological Survey (USGS), Woods Hole Coastal and Marine Science Center (WHCMSC), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), conducted three exploration cruises (USGS Cruise 02051, NOAA RB0208, September 24 to 30, 2002; USGS Cruise 03008, NOAA RB0303, February 18 to March 7, 2003 and USGS Cruise 03032, NOAA RB0305, August 28 to September 4, 2003). These cruises mapped for the first time the morphology of this entire tectonic plate boundary stretching from the Dominican Republic in the west to the Lesser Antilles in the east, a distance of approximately 700 kilometers (430 miles). Observations from these three exploration cruises, coupled with computer modeling and published Global Positioning System (GPS) results and earthquake focal mechanisms have provided new information that is changing the evaluation of the seismic and tsunami hazard from this plate boundary. The observations collected during these cruises also contributed to the basic understanding of the mechanisms that govern plate tectonics, in this case, the creation of the island of Puerto Rico and the deep trench north of it. Results of the sea floor mapping have been an important component of the study of tsunami and earthquake hazards to the northeastern Caribbean and the U.S. Atlantic coast off the United States. For additional information on the cruises see: http://woodshole.er.usgs.gov/operations/ia/public_ds_info.php?fa=2002-051-FA http://woodshole.er.usgs.gov/operations/ia/public_ds_info.php?fa=2002-051-FA http://woodshole.er.usgs.gov/operations/ia/public_ds_info.php?fa=2002-051-FA