Connecticut Hydrography Set: Connecticut Hydrography Line includes the line features of a layer named Hydrography. Hydrography is a 1:24,000-scale, polygon and line feature-based layer that includes all hydrography features depicted on the U.S. Geological Survey (USGS) 7.5 minute topographic quadrangle maps for the State of Connecticut. This layer only includes features located in Connecticut. These hydrography features include waterbodies, inundation areas, marshes, dams, aqueducts, canals, ditches, shorelines, tidal flats, shoals, rocks, channels, and islands. Hydrography is comprised of polygon and line features. Polygon features represent areas of water for rivers, streams, brooks, reservoirs, lakes, ponds, bays, coves, and harbors. Polygon features also depict inundation areas, marshes, dams, aqueducts, canals, tidal flats, shoals, rocks, channels, and islands shown on the USGS 7.5 minute topographic quadrangle maps. Line features represent single-line rivers and streams, aqueducts, canals, and ditches. Line features also enclose all polygon features in the form of natural shorelines, manmade shorelines, dams, closure lines separating adjacent waterbodies, and the apparent limits for tidal flats, rocks, and areas of marsh. The layer is based on information from USGS topographic quadrangle maps published between 1969 and 1984 so it does not depict conditions at any one particular point in time. Also, the layer does not reflect recent changes with the course of streams or location of shorelines impacted by natural events or changes in development since the time the USGS 7.5 minute topographic quadrangle maps were published. Attribute information is comprised of codes to identify hydrography features by type, cartographically represent (symbolize) hydrography features on a map, select waterbodies appropriate to display at different map scales, identify individual waterbodies on a map by name, and describe feature area and length. The names assigned to individual waterbodies are based on information published on the USGS 7.5 minute topographic quadrangle maps or other state and local maps. The layer does not include bathymetric, stream gradient, water flow, water quality, or biological habitat information. This layer was originally published in 1994. The 2005 edition includes the same water features published in 1994, however some attribute information has been slightly modified and made easier to use. Also, the 2005 edition corrects previously undetected attribute coding errors. Connecticut Hydrography Polygon includes the polygon features of a layer named Hydrography. Hydrography is a 1:24,000-scale, polygon and line feature-based layer that includes all hydrography features depicted on the U.S. Geological Survey (USGS) 7.5 minute topographic quadrangle maps for the State of Connecticut. This layer only includes features located in Connecticut. These hydrography features include waterbodies, inundation areas, marshes, dams, aqueducts, canals, ditches, shorelines, tidal flats, shoals, rocks, channels, and islands. Hydrography is comprised of polygon and line features. Polygon features represent areas of water for rivers, streams, brooks, reservoirs, lakes, ponds, bays, coves, and harbors. Polygon features also depict inundation areas, marshes, dams, aqueducts, canals, tidal flats, shoals, rocks, channels, and islands shown on the USGS 7.5 minute topographic quadrangle maps. Line features represent single-line rivers and streams, aqueducts, canals, and ditches. Line features also enclose all polygon features in the form of natural shorelines, manmade shorelines, dams, closure lines separating adjacent waterbodies, and the apparent limits for tidal flats, rocks, and areas of marsh. The layer is based on information from USGS topographic quadrangle maps published between 1969 and 1984 so it does not depict conditions at any one particular point in time. Also, the layer does not reflect recent changes with the course of stream

Connecticut Hydrography Set: Connecticut Hydrography Line includes the line features of a layer named Hydrography. Hydrography is a 1:24,000-scale, polygon and line feature-based layer that includes all hydrography features depicted on the U.S. Geological Survey (USGS) 7.5 minute topographic quadrangle maps for the State of Connecticut. This layer only includes features located in Connecticut. These hydrography features include waterbodies, inundation areas, marshes, dams, aqueducts, canals, ditches, shorelines, tidal flats, shoals, rocks, channels, and islands. Hydrography is comprised of polygon and line features. Polygon features represent areas of water for rivers, streams, brooks, reservoirs, lakes, ponds, bays, coves, and harbors. Polygon features also depict inundation areas, marshes, dams, aqueducts, canals, tidal flats, shoals, rocks, channels, and islands shown on the USGS 7.5 minute topographic quadrangle maps. Line features represent single-line rivers and streams, aqueducts, canals, and ditches. Line features also enclose all polygon features in the form of natural shorelines, manmade shorelines, dams, closure lines separating adjacent waterbodies, and the apparent limits for tidal flats, rocks, and areas of marsh. The layer is based on information from USGS topographic quadrangle maps published between 1969 and 1984 so it does not depict conditions at any one particular point in time. Also, the layer does not reflect recent changes with the course of streams or location of shorelines impacted by natural events or changes in development since the time the USGS 7.5 minute topographic quadrangle maps were published. Attribute information is comprised of codes to identify hydrography features by type, cartographically represent (symbolize) hydrography features on a map, select waterbodies appropriate to display at different map scales, identify individual waterbodies on a map by name, and describe feature area and length. The names assigned to individual waterbodies are based on information published on the USGS 7.5 minute topographic quadrangle maps or other state and local maps. The layer does not include bathymetric, stream gradient, water flow, water quality, or biological habitat information. This layer was originally published in 1994. The 2005 edition includes the same water features published in 1994, however some attribute information has been slightly modified and made easier to use. Also, the 2005 edition corrects previously undetected attribute coding errors. Connecticut Hydrography Polygon includes the polygon features of a layer named Hydrography. Hydrography is a 1:24,000-scale, polygon and line feature-based layer that includes all hydrography features depicted on the U.S. Geological Survey (USGS) 7.5 minute topographic quadrangle maps for the State of Connecticut. This layer only includes features located in Connecticut. These hydrography features include waterbodies, inundation areas, marshes, dams, aqueducts, canals, ditches, shorelines, tidal flats, shoals, rocks, channels, and islands. Hydrography is comprised of polygon and line features. Polygon features represent areas of water for rivers, streams, brooks, reservoirs, lakes, ponds, bays, coves, and harbors. Polygon features also depict inundation areas, marshes, dams, aqueducts, canals, tidal flats, shoals, rocks, channels, and islands shown on the USGS 7.5 minute topographic quadrangle maps. Line features represent single-line rivers and streams, aqueducts, canals, and ditches. Line features also enclose all polygon features in the form of natural shorelines, manmade shorelines, dams, closure lines separating adjacent waterbodies, and the apparent limits for tidal flats, rocks, and areas of marsh. The layer is based on information from USGS topographic quadrangle maps published between 1969 and 1984 so it does not depict conditions at any one particular point in time. Also, the layer does not reflect recent changes with the course of stream

Data on drinking water in Connecticut. Drinking water is a potentially significant route of exposure to contaminants. Today’s regulatory programs are designed to monitor public drinking water supplies across the United States to assure public health protection from drinking water contaminants. The presence of contaminants in water can lead to adverse health effects, including gastrointestinal illness, reproductive problems, and neurological disorders.

,This service represents CTDOT’s Stormwater Drainage Network. The data is collected from a collection of resources including completed construction plans, right-of-way plans, permits & field reconnaissance. Not all drainage features depicted on the map accurately reflect the condition of the drainage network that is currently built. Data is updated, modified and added daily by CTDOT to both grow the inventory of drainage structures statewide and to improve accuracy. Drainage data is collected for continued compliance of the CTDOT MS4 Permit and for CTDOT’s Asset Management Purposes.,Please refer to the CTDOT Maintenance Guide for definitions of all Drainage Features:,ctdot-ms4-gis-database-maintenance-guide-jan-2021.pdf,,This data is digitized at a scale of approximately 1:500 and was digitized from the 2016, 2019 and 2023 CT imagery.,The coordinate system used is NAD 1983 2011 State Plane Connecticut FIPS 0600 Ft US WKID: 6434 Authority: EPSG.,It is edited in the Drainage Network - Office Editors group and is maintained by the Office of Environmental Planning in the Bureau of Planning and the Office of Environmental Compliance in the Bureau of Engineering.,The data is updated daily. The metadata is updated as needed.,

This data release provides coupling of Conterminous United States and several Canadian operational reservoirs used in recent hydrologic modeling studies to authoritative national hydrographic datasets used to identify, calibrate, model, and assess streamflow, water quantity, quality, and ecological resources. The National Inventory of Dams (NID) provides linkages to dams operated in the United States, GRanD provides linkages to Global Dams and Reservoirs, and the National Hydrography Dataset Plus (NHDPlus) provides linkages to the stream network and waterbodies to easily couple with National Hydrologic Models and landscape parameters. The Geospatial Fabric for National Hydrologic Modeling, version 1.1 (GFv1.1) provides linkages to existing National Hydrologic Model (NHM) spatial modeling units. All crosswalks, linkages, and other information is provided in a comma-separated value (csv) file.

,Connecticut 303(d) Impaired Waters 2020 is a subset of Connecticut 305(b) Assessed Waters 2020. If any one of the assigned designated uses is categorized as NOT Supporting, the assessed waterbody is included in this subset and is considered impaired. Additional information about Integrated Water Quality reporting is available on the CT DEEP website, Integrated Water Quality Report page.,Connecticut 305(b) Assessed Waters files includes rivers, lakes and estuaries that have been assessed in compliance with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards. Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody.,This assessment is based on information collected and compiled prior to 2020. It represents conditions at a particular point in time and does not represent current conditions. Depending on the type of waterbody - river, lake, or estuary - this information geographically displays attainment and non-attainment (e.g. full supporting, not supporting, not assessed) for each designated use - aquatic life, marine aquatic life, recreation use, fish consumption, shellfish harvesting, and drinking water supply.,

,Connecticut 303(d) Impaired Waters 2020 is a subset of Connecticut 305(b) Assessed Waters 2020. If any one of the assigned designated uses is categorized as NOT Supporting, the assessed waterbody is included in this subset and is considered impaired. Additional information about Integrated Water Quality reporting is available on the CT DEEP website, Integrated Water Quality Report page.,Connecticut 305(b) Assessed Waters files includes rivers, lakes and estuaries that have been assessed in compliance with Sections 305(b) and 303(d) of the federal Clean Water Act. Section 305(b) of the Clean Water Act requires each state to monitor, assess and report on the quality of its waters relative to attainment of designated uses established by the State's water quality standards. Section 303(d) requires each State to compile a subset of that list identifying only those waters not meeting water quality standards and assign a Total Maximum Daily Load (TMDL) priority ranking to each impaired waterbody.,This assessment is based on information collected and compiled prior to 2020. It represents conditions at a particular point in time and does not represent current conditions. Depending on the type of waterbody - river, lake, or estuary - this information geographically displays attainment and non-attainment (e.g. full supporting, not supporting, not assessed) for each designated use - aquatic life, marine aquatic life, recreation use, fish consumption, shellfish harvesting, and drinking water supply.,

This dataset represents public dams and retarding basins in Victoria. The dataset is a point dataset. This is the unrestricted version of the data for display on the DEECA public website. For Water Corporations, Parks Victoria and AGL Hydro, this data is an extract from the FloodZoom Dams Portal used for annual dam safety reporting. The Dams Portal has two types of water storages, namely Facilities and Reservoirs. A facility can have many water bodies e.g., a water treatment plant with many ponds. A reservoir can have many dams e.g., one body of water with one main dam and several saddle dams.

,