The Doppler Orbitography by Radiopositioning Integrated on Satellite (DORIS) was developed by the Centre National d'Etudes Spatiales (CNES) with cooperation from other French government agencies. The system was developed to provide precise orbit determination and high accuracy location of ground beacons for point positioning. DORIS is a dual-frequency Doppler system that has been included as an experiment on various space missions such as TOPEX/Poseidon, SPOT-2, -3, -4, and -5, Envisat, and Jason satellites. Unlike many other navigation systems, DORIS is based on an uplink device. The receivers are on board the satellite with the transmitters are on the ground. This creates a centralized system in which the complete set of observations is downloaded by the satellite to the ground center, from where they are distributed after editing and processing. An accurate measurment is made of the Doppler shift on radiofrequency signals emitted by the ground beacons and received on the spacecraft.

Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) was developed by the Centre National d'Etudes Spatiales (CNES) with cooperation from other French government agencies. The system was developed to provide precise orbit determination and high accuracy location of ground beacons for point positioning. DORIS is a dual-frequency Doppler system that has been included as an experiment on various space missions such as TOPEX/Poseidon, SPOT-2, -3, -4, and -5, Envisat, and Jason satellites. Unlike many other navigation systems, DORIS is based on an uplink device. The receivers are on board the satellite with the transmitters are on the ground. This creates a centralized system in which the complete set of observations is downloaded by the satellite to the ground center, from where they are distributed after editing and processing. An accurate measurment is made of the Doppler shift on radiofrequency signals emitted by the ground beacons and received on the spacecraft.

The Doppler Orbitography by Radiopositioning Integrated on Satellite (DORIS) was developed by the Centre National d'Etudes Spatiales (CNES) with cooperation from other French government agencies. The system was developed to provide precise orbit determination and high accuracy location of ground beacons for point positioning. DORIS is a dual-frequency Doppler system that has been included as an experiment on various space missions such as TOPEX/Poseidon, SPOT-2, -3, -4, and -5, Envisat, and Jason satellites. Unlike many other navigation systems, DORIS is based on an uplink device. The receivers are on board the satellite with the transmitters are on the ground. This creates a centralized system in which the complete set of observations is downloaded by the satellite to the ground center, from where they are distributed after editing and processing. An accurate measurment is made of the Doppler shift on radiofrequency signals emitted by the ground beacons and received on the spacecraft.

Geocenter determination solutions derived from analysis of Doppler Orbitography by Radiopositioning Integrated on Satellite (DORIS) data. These products are the generated by analysis centers in support of the International DORIS Service (IDS).

Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) Geocenter Time Series Product from the NASA Crustal Dynamics Data Information System (CDDIS). DORIS is a dual-frequency Doppler system consisting of a receiver flying aboard a satellite and a globally distributed network of ground beacons. The DORIS receiver on-board the orbiting satellite tracks the dual-frequency radio signals transmitted by the network of ground beacons and generates the DORIS data. A measurement is made of either the Doppler shift or absolute phase as the satellite’s orbit moves over the ground-based beacon. DORIS data records contain a time-tagged range-rate measurement with associated ancillary information. DORIS observations from a global network can be utilized for a variety of products. Analysis Centers (ACs) of the International DORIS Service (IDS) retrieve DORIS data on a regular basis to compute various DORIS products from data generated by the DORIS beacons supporting the IDS network, including the time series of coordinates of the geocenter or the origin of the terrestrial reference frame. The IDS Analysis Center Coordinator combines these solutions to produce an official IDS geocenter product. The geocenter time series are available in text format.

Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) Earth Orientation Parameters Time Series Product from the NASA Crustal Dynamics Data Information System (CDDIS). DORIS is a dual-frequency Doppler system consisting of a receiver flying aboard a satellite and a globally distributed network of ground beacons. The DORIS receiver on-board the orbiting satellite tracks the dual-frequency radio signals transmitted by the network of ground beacons and generates the DORIS data. A measurement is made of either the Doppler shift or absolute phase as the satellite’s orbit moves over the ground-based beacon. DORIS data records contain a time-tagged range-rate measurement with associated ancillary information. DORIS observations from a global network can be utilized for a variety of products. Analysis Centers (ACs) of the International DORIS Service (IDS) retrieve DORIS data on a regular basis to compute various DORIS products from data generated by the DORIS beacons supporting the IDS network, including the time series of Earth orientation parameters (EOPs). The IDS Analysis Center Coordinator combines these solutions to produce an official IDS EOP product. The EOP time series are available in text format.

Doppler Orbitography by Radiopositioning Integrated on Satellite (DORIS) Data (multi-day files) from the NASA Crustal Dynamics Data Information System (CDDIS). DORIS is a dual-frequency Doppler system consisting of a receiver flying aboard a satellite and a globally distributed network of ground beacons. The DORIS receiver on-board the orbiting satellite tracks the dual-frequency radio signals transmitted by the network of ground beacons and generates the DORIS data. A measurement is made of either the Doppler shift or absolute phase as the satellite’s orbit moves over the ground-based beacon. DORIS data records contain a time-tagged range-rate measurement with associated ancillary information. The data records also contain information about any corrections that may have been applied during the processing phase, such as for the ionosphere, troposphere, and satellite center of mass, among others. Furthermore, meteorological measurements (e.g., temperature, relative humidity, ground pressure) recorded by instruments co-located with the ground-based beacons are included with the DORIS data and can be used to determine the tropospheric correction. DORIS data in the original format are also supplied to the data center in multi-day files, corresponding to the mission’s data processing arc, and are forwarded approximately 20 days after the end of the last observation day contained in the file. More information about these data is available on the CDDIS website at https://cddis.nasa.gov/Data_and_Derived_Products/DORIS/DORIS_data_holdings.html.

Doppler Orbitography by Radiopositioning Integrated on Satellite (DORIS) Station Position Time Series Product from the NASA Crustal Dynamics Data Information System (CDDIS). DORIS is a dual-frequency Doppler system consisting of a receiver flying aboard a satellite and a globally distributed network of ground beacons. The DORIS receiver on-board the orbiting satellite tracks the dual-frequency radio signals transmitted by the network of ground beacons and generates the DORIS data. A measurement is made of either the Doppler shift or absolute phase as the satellite’s orbit moves over the ground-based beacon. DORIS data records contain a time-tagged range-rate measurement with associated ancillary information. DORIS observations from a global network can be utilized for a variety of products. Analysis Centers (ACs) of the International DORIS Service (IDS) retrieve DORIS data on a regular basis and after producing the weekly SINEX files using the current ITRF, compute station position time series solutions for the DORIS beacons supporting the IDS network. The IDS Analysis Center Coordinator combines these individual AC solutions to generate the official IDS DORIS network time series solution in the IDS STCD (Station Coordinates Difference) format.

Doppler Orbitography by Radiopositioning Integrated on Satellite (DORIS) Data (multi-day files) from the NASA Crustal Dynamics Data Information System (CDDIS). DORIS is a dual-frequency Doppler system consisting of a receiver flying aboard a satellite and a globally distributed network of ground beacons. The DORIS receiver on-board the orbiting satellite tracks the dual-frequency radio signals transmitted by the network of ground beacons and generates the DORIS data. A measurement is made of either the Doppler shift or absolute phase as the satellite’s orbit moves over the ground-based beacon. DORIS data records contain a time-tagged range-rate measurement with associated ancillary information. The data records also contain information about any corrections that may have been applied during the processing phase, such as for the ionosphere, troposphere, and satellite center of mass, among others. Furthermore, meteorological measurements (e.g., temperature, relative humidity, ground pressure) recorded by instruments co-located with the ground-based beacons are included with the DORIS data and can be used to determine the tropospheric correction. DORIS data in RINEX format are supplied to the data center in daily files and are forwarded with a typical 1-day delay. More information about these data is available on the CDDIS website at https://cddis.nasa.gov/Data_and_Derived_Products/DORIS/DORIS_data_holdings.html.

The Doppler Orbitography by Radiopositioning Integrated on Satellite (DORIS) was developed by the Centre National d'Etudes Spatiales (CNES) with cooperation from other French government agencies. The system was developed to provide precise orbit determination and high accuracy location of ground beacons for point positioning. DORIS is a dual-frequency Doppler system that has been included as an experiment on various space missions such as TOPEX/Poseidon, SPOT-2, -3, -4, and -5, Envisat, and Jason satellites. Unlike many other navigation systems, DORIS is based on an uplink device. The receivers are on board the satellite with the transmitters are on the ground. This creates a centralized system in which the complete set of observations is downloaded by the satellite to the ground center, from where they are distributed after editing and processing. An accurate measurment is made of the Doppler shift on radiofrequency signals emitted by the ground beacons and received on the spacecraft.