DSCOVR_EPIC_L2_AER_03 is the Deep Space Climate Observatory (DSCOVR) Enhanced Polychromatic Imaging Camera (EPIC) Level 2 UV Aerosol Version 3 data product. Observations for this data product are at 340 and 388 nm and are used to derive near UV aerosol properties. The EPIC aerosol retrieval algorithm (EPICAERUV) uses a set of aerosol models to account for the presence of carbonaceous aerosols from biomass burning and wild fires (BIO), desert dust (DST), and sulfate-based (SLF) aerosols. These aerosol models are identical to those assumed in the OMI algorithm (Torres et al., 2007; Jethva and Torres, 2011). Aerosol data products generated by the EPICAERUV algorithm are aerosol extinction optical depth (AOD) and single scattering albedo (SSA) at 340, 388 and 500 nm for clear sky conditions. AOD of absorbing aerosols above clouds is also reported (Jethva et al., 2018). In addition, the UV Aerosol Index (UVAI) is calculated from 340 and 388 nm radiances for all sky conditions. AOD is a dimensionless measure of the extinction of light y aerosols due to the combined effect of scattering and absorption. SSA represents the fraction of extinction solely due to aerosol scattering effects. The AI is simply a residual parameter that quantifies the difference in spectral dependence between measured and calculated near UV radiances assuming a purely molecular atmosphere. Because most of the observed positive residuals are associated with the presence of absorbing aerosols, this parameter is commonly known as the UV Absorbing Aerosol Index. EPIC-derived aerosol parameters are reported at a 10 km (nadir) resolution.

DSCOVR_EPIC_L2_AOCH_01 is the aerosol optical centroid height (AOCH) product for global smoke and dust aerosols retrieved from oxygen A-band (764 nm) and B-band (688 nm) measured by Earth Polychromatic Imaging Camera (EPIC) onboard the Deep Space Climate Observatory (DSCOVR) satellite. The ultraviolet aerosol index (UVAI) is also retrieved using EPIC 340 and 388 nm channels. The retrieval algorithm assumes a quasi-Gaussian aerosol vertical profile shape and retrieves AOD and the height at which the aerosol extinction peaks (e.g., AOCH). Cloud mask is conducted through the spatial variability tests at 443 and 551 nm, as well as the brightness tests with the prescribed threshold of TOA reflectance at 443 and 680 nm for land and 443, 680 and 780 nm over water. The water pixels with a sun glint angle smaller than 30 are screened out. AOD is then retrieved from EPIC atmospheric window channel 443 nm, and the AOCH is derived subsequently based on the ratios of oxygen A and B bands to their corresponding neighboring continuum bands (764/780 nm and 688/680 nm). The surface reflectance for water surface comes from GOME-2 Lambert-equivalent reflectivity (LER) product. A 10-year climatology of Lambertian surface reflectance from MODIS BRDF/Albedo product (MCD43) is applied for retrievals over the land surface. The aerosol types around the globe are classified based on their sources at different regions and their corresponding aerosol single scattering properties are defined based on AERONET climatology for each region. The retrieval algorithm is based upon the lookup table constructed by the Unified and Linearized Vector Radiative Transfer Model (UNL-VRTM).

Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) is a 10-channel spectro-radiometer (317 – 780 nm) onboard National Oceanic and Atmospheric Administration's (NOAA) DSCOVR spacecraft located at the Earth-Sun Lagrange-1 (L-1) point giving EPIC a unique angular perspective that is used in science applications to measure ozone, aerosols, cloud reflectivity, cloud height, vegetation properties, and ultraviolet (UV) radiation estimates at Earth's surface. EPIC provides ten narrow-band spectral images of the entire sunlit face of the Earth using a 2048x2048 pixel Charge Coupled Device (CCD) detector coupled to a 30-cm aperture Cassegrain telescope. EPIC collects radiance data from the Earth and other sources through the Camera/Telescope Assembly. EPIC has a field of view (FOV) of 0.62 degrees, sufficient to image the entire Earth. Because of DSCOVR's tilted (Lissajous) orbit about the L‐1 point, the apparent angular size of the Earth varies from 0.45 to 0.53 degrees within its 6-month orbital period. Depending on the season, a complete set of per-band images is taken every 60 to 100 minutes.Accompanying instrument metadata and a series of calibrations and corrections are applied to convert the images to Level 1A format properly. The significant corrections are for flat‐fielding and stray light. Flat-fielding is based on measurements with a uniform light source to measure the differences in sensitivity for each of the 4 million pixels. The resulting correction map is applied to the estimated counts from the CCD. Stray light was measured in the laboratory using a series of small-diameter light sources entering the telescope and imaged on the CCD. A similar set of measurements has been performed on orbit using the moon. The illumination of pixels outside the primary diameter of the light source was measured to produce a detailed matrix map of the entire stray light function, and the resulting stray light correction was applied to every image. Other corrections are also used based on laboratory measurements. For wavelengths longer than 550 nm, there are back-to-front interference effects in the partially transparent CCD (etaloning) that must also be removed from measured radiance.The Level 1B products contain calibrated and geolocated EPIC images with ancillary metadata. These data products are in HDF5 format.

DSCOVR_EPIC_L2_GLINT_01 is Version 1 of the Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) Level 2 glint data product. This product indicates the presence of glint caused by the single scattering specular reflection of sunlight either from horizontally oriented ice crystals floating in clouds, or from smooth, highly reflective water surfaces. Such glints can prevent accurate retrievals of atmospheric and surface properties using existing algorithms but can also be used to learn more about the glint-causing objects. The glint detection algorithm relies on the fact that EPIC takes images at different wavelengths at slightly different times. For example, red images are taken about 4 minutes after blue images. During these few minutes, the Earth’s rotation changes the orientation of the scene by one degree, which can affect whether EPIC observations at a specific wavelength will capture or miss the narrowly focused specular reflection from ice clouds or smooth water surfaces. As a result, sharp brightness differences between EPIC images taken a few minutes apart can identify glint signals. The glint product includes three parameters for each pixel in the part of EPIC images where the alignment of solar and viewing directions is suitable for sun glint observations: (1) The surface type flag shows whether the area of a pixel is covered mainly by water, desert, or non-desert land; (2) The glint angle—the angle between the actual EPIC view direction and the direction of looking straight into the specular reflection from a perfectly horizontal surface—tells how favorable the EPIC view direction is for glint detection and can help in estimating the distribution of ice crystal orientation; (3) The glint mask indicates whether or not glint has been detected.

DSCOVR_EPIC_L2_GLINT_01 is Version 1 of the Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) Level 2 glint data product. This product indicates the presence of glint caused by the single scattering specular reflection of sunlight either from horizontally oriented ice crystals floating in clouds or from smooth, highly reflective water surfaces. Such glints can prevent accurate retrievals of atmospheric and surface properties using existing algorithms but can also be used to learn more about the glint-causing objects.The glint detection algorithm relies on EPIC taking images at different wavelengths at slightly different times. For example, red images are taken about 4 minutes after blue images. During these few minutes, the Earth's rotation changes the scene's orientation by one degree, affecting whether EPIC observations at a specific wavelength will capture or miss the narrowly focused specular reflection from ice clouds or smooth water surfaces. As a result, sharp brightness differences between EPIC images taken a few minutes apart can identify glint signals. The glint product includes three parameters for each pixel in the part of EPIC images where the alignment of solar and viewing directions is suitable for sun glint observations: (1) The surface type flag shows whether the area of a pixel is covered mainly by water, desert, or non-desert land; (2) The glint angle—the angle between the actual EPIC view direction and the direction of looking straight into the specular reflection from a perfectly horizontal surface—tells how favorable the EPIC view direction is for glint detection and can help in estimating the distribution of ice crystal orientation; (3) The glint mask indicates whether or not glint has been detected.

Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) is a 10-channel spectro-radiometer (317 – 780 nm) onboard NOAA’s DSCOVR spacecraft located at the Earth-Sun Lagrange-1 (L-1) point, giving EPIC a unique angular perspective that is used in science applications to measure ozone, aerosols, cloud reflectivity, cloud height, vegetation properties, and UV radiation estimates at Earth's surface. EPIC provides 10 narrow-band spectral images of the entire sunlit face of the Earth using a 2048x2048 pixel CCD (Charge Coupled Device) detector coupled to a 30-cm aperture Cassegrain telescope. EPIC collects radiance data of the Earth and other sources through the Camera/Telescope Assembly. EPIC has a field of view (FOV) of 0.62 degrees, sufficient to image the entire Earth. Because of DSCOVR's tilted (Lissajous) orbit about the L‐1 point, the apparent angular size of the Earth varies from 0.45 to 0.53 degrees within its 6-month orbital period. Depending on the season, a complete set of per-band images is taken every 60 to 100 minutes. Accompanying instrument metadata and a series of calibrations and corrections are applied to properly convert the images to Level 1A format. The major corrections are for flat‐fielding and stray light. Flat-fielding is based on measurements with a uniform light source to measure the differences in sensitivity for each of the 4 million pixels. The resulting correction map is applied to the measured counts from the CCD. Stray light was measured in the laboratory using a series of small diameter light sources entering the telescope and imaged on the CCD. A similar set of measurements has been performed on orbit using the moon. The illumination of pixels outside the main diameter of the light source was measured to produce a detailed matrix map of the entire stray light function, and the resulting stray light correction is applied to every image. Other corrections are also applied based on laboratory measurements. For wavelengths longer than 550 nm there are back to front interference effects in the partially transparent CCD (etaloning) that must also be removed from the measured radiances. The Level 1A products contain calibrated EPIC images with ancillary metadata and geolocation information. These data products are in HDF5 format.

Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) is a 10-channel spectro-radiometer (317 – 780 nm) onboard NOAA’s DSCOVR spacecraft located at the Earth-Sun Lagrange-1 (L-1) point, giving EPIC a unique angular perspective that is used in science applications to measure ozone, aerosols, cloud reflectivity, cloud height, vegetation properties, and UV radiation estimates at Earth's surface. EPIC provides 10 narrow-band spectral images of the entire sunlit face of the Earth using a 2048x2048 pixel Charge Coupled Device (CCD) detector coupled to a 30-cm aperture Cassegrain telescope. EPIC collects radiance data of the Earth and other sources through the Camera/Telescope Assembly. EPIC has a field of view (FOV) of 0.62 degrees, sufficient to image the entire Earth. Because of DSCOVR's tilted (Lissajous) orbit about the L‐1 point, the apparent angular size of the Earth varies from 0.45 to 0.53 degrees within its 6-month orbital period. Depending on the season, a complete set of per-band images is taken every 60 to 100 minutes. Accompanying instrument metadata and a series of calibrations and corrections are applied to properly convert the images to Level 1A format. The major corrections are for flat‐fielding and stray light. Flat-fielding is based on measurements with a uniform light source to measure the differences in sensitivity for each of the 4 million pixels. The resulting correction map is applied to the measured counts from the CCD. Stray light was measured in the laboratory using a series of small diameter light sources entering the telescope and imaged on the CCD. A similar set of measurements has been performed on orbit using the moon. The illumination of pixels outside the main diameter of the light source was measured to produce a detailed matrix map of the entire stray light function, and the resulting stray light correction is applied to every image. Other corrections are also applied based on laboratory measurements. For wavelengths longer than 550 nm there are back to front interference effects in the partially transparent CCD (etaloning) that must also be removed from measured radiance. The Level 1B products contain calibrated and geolocated EPIC images with ancillary metadata. These data products are in HDF5 and PNG format.

DSCOVR_EPIC_L2_CLOUD_03 is the Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) Level 2 Cloud version 03 data product. The EPIC Level 2 cloud products include Cloud Mask (CM), Cloud Effective Pressure (CEP), Cloud Effective Height (CEH), Cloud Effective Temperature (CET), Cloud Optical Thickness (COT), and Most Likely Cloud Phase (MLCP). All the products are provided at the EPIC original temporal and special resolutions. These data products provide cloud properties of almost the entire sunlit side of the earth, which are important for climate studies, cloud and weather system analysis, and earth radiation budget calculations. Data collection for this product is ongoing. Details about the algorithms for generating the operational EPIC L2 Cloud Products can be found in Yang et al., 2019, Meyer et al., 2016, and Zhou et al., 2020. A brief description is provided below: (1) The EPIC CM is based on the threshold method; surface is classified into three categories: land, deep water and snow/ice; CM with confidence level is determined independently for each surface type. (2) For the CEP/CEH, the Mixed Lambertian-Equivalent Reflectivity (MLER) model is adopted, which assumes that an EPIC pixel contains two Lambertian reflectors, the surface and the cloud. This assumption simplifies the radiative transfer equation and cloud pressure can be retrieved using the oxygen A- and B-band pairs. Since the MLER model does not take into account the effect of photon penetration into clouds, the retrieved cloud pressure is an effective pressure. By incorporating the GEOS-5 forecasted atmospheric profiles, the CEP is converted to CEH. (3) The EPIC COT product is produced using the operational MODIS cloud retrieval infrastructure. Since EPIC does not have particle size sensitive channels, a single channel retrieval algorithm was developed assuming fixed values for cloud effective radius (CER). In addition, cloud phase determination capability for EPIC is limited; hence the EPIC COT product provides two retrievals for each cloudy pixel, one assuming liquid phase and the other ice phase. A likely cloud phase is also provided based on the CEH.

Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC) is a 10-channel spectro-radiometer (317 – 780 nm) onboard the National Oceanic and Atmospheric Administration's (NOAA) DSCOVR spacecraft located at the Earth-Sun Lagrange-1 (L-1) point giving EPIC a unique angular perspective that is used in science applications to measure ozone, aerosols, cloud reflectivity, cloud height, vegetation properties, and ultraviolet (UV) radiation estimates at Earth's surface. EPIC provides ten narrow-band spectral images of the entire sunlit face of the Earth using a 2048x2048 pixel CCD (Charge Coupled Device) detector coupled to a 30-cm aperture Cassegrain telescope. EPIC collects radiance data from the Earth and other sources through the Camera/Telescope Assembly. EPIC has a field of view (FOV) of 0.62 degrees, sufficient to image the entire Earth. Because of DSCOVR's tilted (Lissajous) orbit about the L‐1 point, the apparent angular size of the Earth varies from 0.45 to 0.53 degrees within its 6-month orbital period. Depending on the season, a complete set of per-band images is taken every 60 to 100 minutes.Accompanying instrument metadata and a series of calibrations and corrections are applied to convert the images to Level 1A format properly. The significant corrections are for flat‐fielding and stray light. Flat-fielding is based on measurements with a uniform light source to measure the differences in sensitivity for each of the 4 million pixels. The resulting correction map is applied to the measured counts from the CCD. Stray light was measured in the laboratory using a series of small-diameter light sources entering the telescope and imaged on the CCD. A similar set of measurements has been performed on orbit using the moon. The illumination of pixels outside the primary diameter of the light source was measured to produce a detailed matrix map of the entire stray light function, and the resulting stray light correction was applied to every image. Other corrections are also used based on laboratory measurements. For wavelengths longer than 550 nm, there are back-to-front interference effects in the partially transparent CCD (etaloning) that must also be removed from the measured radiances.The Level 1A products contain calibrated EPIC images with ancillary metadata and geolocation information. These data products are in HDF5 format.

EPIC Tropospheric Ozone Data Product The Earth Polychromatic Imaging Camera (EPIC) on the Deep Space Climate Observatory (DSCOVR) spacecraft provides measurements of Earth-reflected radiances from the entire sunlit portion of the Earth. The measurements from four EPIC UV (Ultraviolet) channels are used to reconstruct global distributions of total ozone. The tropospheric ozone columns (TCO) are then derived by subtracting independently measured stratospheric ozone columns from the EPIC total ozone. TCO data product files report gridded synoptic maps of TCO measured over the sunlit portion of the Earth disk on a 1-2 hour basis. Sampling times for these hourly TCO data files are the same as for the EPIC L2 total ozone product. This Version 1.0 of the TCO product is based on Version 3 of the EPIC L1 product and the Version 3 Total Ozone Column Product. The stratospheric columns were derived from the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) ozone fields (Gelaro et al., 2017). In contrast to the EPIC total ozone maps that are reported at high spatial resolution of 18 × 18 km2 near the center of the image, the TCO maps are spatially averaged over several EPIC pixels and reported on a regular spatial grid (1° latitude x 1° longitude). Kramarova et al. (2021) provide a detailed description of the EPIC TCO product and its evaluation against independent sonde and satellite measurements. Table 1 lists all of the variables included in the TCO product files. Ozone arrays in the product files are integrated vertical columns in Dobson Units (DU; 1 DU = 2.69×1020 molecules m-2). Filename Convention The TCO product files are formatted HDF5 and represent a Level-4 (L4) product. The filenames have the following naming convention: ”DSCOVR_EPIC_L4_TrO3_01_YYYYMMDDHHMMSS_03.h5” where “TrO3” means tropospheric column ozone, “01” means that this is version 01 for this product, “YYYYMMDDHHMMSS” is the UTC measurement time with “YYYY” for year (2015-present), “MM” for month (01-12), “DD” for day of the month (1-31), and “HHMMSS” denotes hours-minutes-seconds, and “03” signifies that v3 L1b measurements were used to derive the EPIC total ozone and consequently TCO. Column Weighting Function Adjustment There are two TCO gridded arrays in each hourly data file for the user to choose from; one is denoted TroposphericColumnOzone and the other is TroposphericColumnOzoneAdjusted. The latter TCO array includes an adjustment to correct for reduced sensitivity of the EPIC UV measurements in detecting ozone in the low troposphere/boundary layer. The adjustment depends on latitude and season and was derived using simulated tropospheric ozone from the GEOS-Replay model (Strode et al. 2020) constrained by the MERRA-2 meteorology through so-called replay method. Our analysis (Kramarova et al., 2021) indicated that the adjusted TCO array is more accurate and precise. Flagging Bad Data Kramarova et al. (2021) notes that the preferred EPIC total ozone measurements used for scientific study are those where the L2 “AlgorithmFlag” parameter is equal to 1, 101, or 111. In this TCO product we have included only L2 total ozone pixels with these algorithm flag values. A gridded version of the AlgorithmFlag parameter is provided in the TCO product files, as a comparison reference, but it is not needed by the user for applying data quality filtering. Another parameter in the EPIC L2 total ozone files for filtering questionable data is the “ErrorFlag”. The TCO product files include a gridded version of this ErrorFlag parameter that the user should apply. Only TCO gridded pixels with ErrorFlag value of zero should be used. TCO measurements at high satellite look angles and/or high solar zenith angles should also be filtered out for analysis. The TCO files include a gridded version of the satellite look angle and the solar zenith angle denoted as “SatelliteLookAngle” and “SolarZenithAngle”, respectively.