Bed sediment samples were collected in San Pablo Bay and Grizzly Bays on eight days from January through September 2020, to analyze for sediment properties including bulk density, particle size distribution, and percent organic carbon. Sediment samples were collected from a small vessel near pre-established USGS instrument moorings using a Gomex box corer that was subsampled with three push cores (37 mm in diameter) per Gomex core. Six subsamples were collected from the top 5 centimeters (cm) of each push core, a few push cores included the top 8 cm. The top two subsamples were each 0.5 cm thick, and all following subsamples were each 1 cm thick. Push core samples from the first, third, and fifth centimeter depth were analyzed for grain size and percent organic carbon, while all 6 sections were analyzed for bulk density. Data are provided in a comma-delimited values spreadsheet. These data were collected as part of a collaborative project with the USGS California Water Science Center and the USGS Water Mission Area on physical and biological controls on sediment erodibility, funded by the USGS Priority Ecosystems Program for San Francisco Bay and Delta and the USGS Coastal Marine Hazards and Resources Program.

Bed sediment samples were collected in San Pablo Bay and Grizzly Bays on eight days from June through November 2019, to analyze for sediment properties including bulk density, particle size distribution, and percent organic carbon. Sediment samples were collected from a small vessel near pre-established USGS instrument moorings using a Gomex box corer that was subsampled with three push cores (37 mm in diameter) per Gomex core. Six subsamples were collected from the top 5 centimeters (cm) of each push core, a few push cores included the top 8 cm. The top two subsamples were each 0.5 cm thick, and all following subsamples were each 1 cm thick. Push core samples from the first, third, and fifth centimeter depth were analyzed for grain size and percent organic carbon, while all 6 sections were analyzed for bulk density. Data are provided in a comma-delimited values spreadsheet. These data were collected as part of a collaborative project with the USGS California Water Science Center and the USGS Water Mission Area on physical and biological controls on sediment erodibility, funded by the USGS Priority Ecosystems Program for San Francisco Bay and Delta and the USGS Coastal Marine Hazards and Resources Program.

Bed sediment samples were collected in Lindsey Slough in April 2017, and Middle River and the Mokelumne River in March 2018, to analyze for sediment properties, including bulk density, particle size distribution, and percent organic carbon. Sediment samples were collected within the vegetation with push corers deployed from a small vessel, and in the unvegetated channel with a Gomex box corer, which was subsampled with three push cores per Gomex core. Data are provided in a comma-delimited values spreadsheet. These data were collected as part of a cooperative project, with the USGS California Water Science Center and the California Department of Fish and Wildlife, on the effects of invasive aquatic vegetation on sediment transport in the Sacramento-San Joaquin Delta.

Sediment samples were collected on and adjacent to the Whale's Tail South marsh. Short push-cores of bed sediment were collected in South San Francisco Bay adjacent to Whale's Tail South marsh on five days from June through August 2021 and 3 days from November 2021 to January 2022. Additional samples were taken from sediment deposited on ceramic tiles attached to the marsh surface and from rip-up clasts deposited on the marsh edge. Samples were analyzed for sediment properties including bulk density, particle size distribution, and percent carbon.

Bed sediment samples were collected from the intertidal, and subtidal shallows of San Pablo Bay National Wildlife Refuge and Corte Madera Bay near stations where instrumented platforms that were collecting hydrographic time-series were deployed. Sediment sediments were collected with push cores, either manually or by subsampling a Gomex box corer. Cores, which ranged in length from 5 to 18 centimeters (cm), were sectioned by depth. The top two sections from each core were 0.5 cm thick, the following sections were 1 cm thick, sections below 6 cm were often sectioned either into sections that were 1 or 2 cm thick. Additional samples were taken from sediment deposited on ceramic tiles attached to the marsh surface. Samples were analyzed for sediment properties including bulk density, particle size distribution, loss on ignition, and percent carbon.

Bed sediment samples were collected from the intertidal, and subtidal shallows of San Pablo Bay National Wildlife Refuge and Corte Madera Bay near stations where instrumented platforms that were collecting hydrographic time-series were deployed. Sediment sediments were collected with push cores, either manually or by subsampling a Gomex box corer. Cores, which ranged in length from 5 to 18 centimeters (cm), were sectioned by depth. The top two sections from each core were 0.5 cm thick, the following sections were 1 cm thick, sections below 6 cm were often sectioned either into sections that were 1 or 2 cm thick. Additional samples were taken from sediment deposited on ceramic tiles attached to the marsh surface. Samples were analyzed for sediment properties including bulk density, particle size distribution, loss on ignition, and percent carbon.

Sediment cores were collected from San Pablo Bay, in the Sacramento-San Joaquin Delta in California by the U.S. Geological Survey Pacific Coastal and Marine Science Center (PCMSC) during multiple surveys from 2011 to 2012. The cores were analyzed for grain-size distributions at the PCMSC sediment lab.

Sediment grain size was determined on one to five cm subsamples of push cores collected from the Escanaba Trough during May to June 2022.

Bed sediment samples were collected in south San Francisco Bay on two days in July 2020 to analyze for sediment grain size distributions. Sediment samples were collected from the R/V Snavely near pre-established U.S. Geological Survey instrument moorings using a Gomex or Ponar box corer that was subsampled by scraping the top 0.5 cm of the core. Data are provided in a comma-delimited values spreadsheet.

Grain size distribution, bulk density, and percent carbon are reported for sediment push cores from two flooded agricultural tracts, Little Holland Tract and Liberty Island, in the Sacramento-San Joaquin Delta, California. Push core samples were collected from 17 sites by the U.S. Geological Survey in June 2016. Each core was analyzed at multiple depths to investigate variations in particle sizes with depth below the sediment surface. The same sites were sampled previously in 2014 (https://www.sciencebase.gov/catalog/item/5a73a58fe4b0a9a2e9e172cf). These data provide insight into the variation of particle size distributions in space, bed depth, and time.