The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Mapping began in earnest in 2007 by re-sampling the 2002 imagery to a 3-meter pixel resolution and then segmenting it using eCognition software. Initial segments were created to delineate obvious landforms (e.g. open water and fields) and physiognomic features (e.g. grasslands versus woodlands). Following segmentation, the lines were exported as ArcInfo shapefiles and converted to ArcInfo coverages. The resulting coverages were run through a series of smoothing routines until no obvious artificial or relict breaks in the lines were visible. Following smoothing, the line-work was manually cleaned to remove extraneous lines, small polygons, and polygons that obviously split a homogenous stand of vegetation.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. All of the interpreted and remotely sensed data were converted to Geographic Information System (GIS) databases using ArcMap© software and are included in a comprehensive geodatabase. Draft maps created from the vegetation classification were field-tested and revised before independent ecologists conducted an assessment of the map’s accuracy during 2014.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. All of the interpreted and remotely sensed data were converted to Geographic Information System (GIS) databases using ArcMap© software and are included in a comprehensive geodatabase. Draft maps created from the vegetation classification were field-tested and revised before independent ecologists conducted an assessment of the map’s accuracy during 2014.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. A digital vegetation map for GARI was developed as a personal geodatabase using Environmental Systems Research Institute (ESRI) ArcGIS software. The geodatabase includes a point feature class for locations of plots and two polygon-feature classes (clipped by the park boundary and unclipped) for vegetation, including non-vegetated land cover. The vegetation map includes 31 map classes. Upland communities comprise about 86% of the park area and are represented by 13 map classes. Two upland map classes each include patches of two associations, all others represent single associations.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. A digital vegetation map for GARI was developed as a personal geodatabase using Environmental Systems Research Institute (ESRI) ArcGIS software. The geodatabase includes a point feature class for locations of plots and two polygon-feature classes (clipped by the park boundary and unclipped) for vegetation, including non-vegetated land cover. The vegetation map includes 31 map classes. Upland communities comprise about 86% of the park area and are represented by 13 map classes. Two upland map classes each include patches of two associations, all others represent single associations.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The TOP 2015 imagery was mosaiced and manipulated using image processing and segmentation techniques (e.g. unsupervised image classification, normalized difference vegetation index, etc.) to highlight any subtle vegetation signature differences. All of the preliminary results were evaluated for usefulness and the best examples were first converted to digital lines and polygons, were next combined with other relevant AMIS GIS layers (such as the roads network), and the results were used as the base layer for the new AMIS vegetation mapping effort. Building off the base layer, all relevant lines and polygons were exported as shapefiles and converted to ArcGIS coverages. The resulting coverages were run through a series of smoothing routines provided in the ArcGIS software. Following the smoothing, all digital line-work was manipulated to remove extraneous lines, eliminate small polygons, and merged polygons that split obvious stands of homogeneous vegetation. The cleaning stage was considered complete when all resulting polygons matched homogenous stands of vegetation apparent on the TOP 2015 imagery. At this point, the mapping shifted to manual techniques and all vegetation lines and polygons were visually inspected and manually moved, edited and/or updated as needed.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The TOP 2015 imagery was mosaiced and manipulated using image processing and segmentation techniques (e.g. unsupervised image classification, normalized difference vegetation index, etc.) to highlight any subtle vegetation signature differences. All of the preliminary results were evaluated for usefulness and the best examples were first converted to digital lines and polygons, were next combined with other relevant AMIS GIS layers (such as the roads network), and the results were used as the base layer for the new AMIS vegetation mapping effort. Building off the base layer, all relevant lines and polygons were exported as shapefiles and converted to ArcGIS coverages. The resulting coverages were run through a series of smoothing routines provided in the ArcGIS software. Following the smoothing, all digital line-work was manipulated to remove extraneous lines, eliminate small polygons, and merged polygons that split obvious stands of homogeneous vegetation. The cleaning stage was considered complete when all resulting polygons matched homogenous stands of vegetation apparent on the TOP 2015 imagery. At this point, the mapping shifted to manual techniques and all vegetation lines and polygons were visually inspected and manually moved, edited and/or updated as needed.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment. Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on screen based on the plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the NVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment. Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on screen based on the plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the NVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. An ArcInfo (copyright ESRI) GIS database was designed for THRO using the National Park GIS Database Design, Layout, and Procedures created by RSGIG. This was created through Arc Macro Language (AML) scripts that helped automate the transfer process and ensure that all spatial and attribute data was consistent and stored properly. Actual transfer of information from the interpreted aerial photographs to a digital, geo-referenced format involved two techniques, scanning (for the vegetation classes) and on-screen digitizing (for the land-use classes). Transferred information used to create vegetation polygon coverages and linear coverages in ArcInfo were based on quarter-quad borders. Attribute information including vegetation map unit, location, and aerial photo number was subsequently entered for all polygons. In addition, the spatial database has an FGDC-compliant metadata file.