,The Alquist-Priolo Earthquake Fault Zoning Act (1972) and the Seismic Hazards Mapping Act (1990) direct the State Geologist to delineate regulatory "Zones of Required Investigation" to reduce the threat to public health and safety and to minimize the loss of life and property posed by earthquake-triggered ground failures. Cities and counties affected by the zones must regulate certain development "projects" within them. These Acts also require sellers of real property (and their agents) within a mapped hazard zone to disclose at the time of sale that the property lies within such a zone.,Fault Evaluation Reports are available for those areas covered by a Regulatory Map however there are reports available for areas outside the Regulatory map boundary. For a complete set of maps available for purchase on CD please contact the CGS Library.,

This data set contains the Alquist-Priolo Earthquake Fault Zones as shown on the Official Alquist-Priolo Earthquake Fault Zones Maps. The dataset is comprised of polygons that form regulatory zone boundaries (Alquist-Priolo Earthquake Fault Zones). These features delineate areas where surface fault rupture previously has occurred, or where local topographic, geological, and geotechnical conditions indicate a potential for permanent ground displacements such that mitigation by avoidance as stated in Public Resources Code Section 2621.5 would be required.

This data set contains the Alquist-Priolo Earthquake Fault Zones as shown on the Official Alquist-Priolo Earthquake Fault Zones Maps. The dataset is comprised of polygons that form regulatory zone boundaries (Alquist-Priolo Earthquake Fault Zones). These features delineate areas where surface fault rupture previously has occurred, or where local topographic, geological, and geotechnical conditions indicate a potential for permanent ground displacements such that mitigation by avoidance as stated in Public Resources Code Section 2621.5 would be required.

This data set contains the Alquist-Priolo Earthquake Fault Zones as shown on the Official Alquist-Priolo Earthquake Fault Zones Maps. The dataset is comprised of polygons that form regulatory zone boundaries (Alquist-Priolo Earthquake Fault Zones). These features delineate areas where surface fault rupture previously has occurred, or where local topographic, geological, and geotechnical conditions indicate a potential for permanent ground displacements such that mitigation by avoidance as stated in Public Resources Code Section 2621.5 would be required.

,The Alquist-Priolo Earthquake Fault Zoning Act (1972) and the Seismic Hazards Mapping Act (1990) direct the State Geologist to delineate regulatory "Zones of Required Investigation" to reduce the threat to public health and safety and to minimize the loss of life and property posed by earthquake-triggered ground failures. Cities and counties affected by the zones must regulate certain development "projects" within them. These Acts also require sellers of real property (and their agents) within a mapped hazard zone to disclose at the time of sale that the property lies within such a zone.,Fault Evaluation Reports are available for those areas covered by a Regulatory Map however there are reports available for areas outside the Regulatory map boundary. For a complete set of maps available for purchase on CD please contact the CGS Library.,

This data set contains the Alquist-Priolo Earthquake Fault Zones as shown on the Official Alquist-Priolo Earthquake Fault Zones Maps. The dataset is comprised of polygons that form regulatory zone boundaries (Alquist-Priolo Earthquake Fault Zones). These features delineate areas where surface fault rupture previously has occurred, or where local topographic, geological, and geotechnical conditions indicate a potential for permanent ground displacements such that mitigation by avoidance as stated in Public Resources Code Section 2621.5 would be required.

This data set contains the Alquist-Priolo Earthquake Fault Zones as shown on the Official Alquist-Priolo Earthquake Fault Zones Maps. The dataset is comprised of polygons that form regulatory zone boundaries (Alquist-Priolo Earthquake Fault Zones). These features delineate areas where surface fault rupture previously has occurred, or where local topographic, geological, and geotechnical conditions indicate a potential for permanent ground displacements such that mitigation by avoidance as stated in Public Resources Code Section 2621.5 would be required.

,

This is a digital Seismic Hazard Zone Map presenting areas where liquefaction and landslides may occur during a strong earthquake. Three types of geological hazards, referred to as seismic hazard zones, may be featured on the map: 1) liquefaction, 2) earthquake-induced landslides, and 3) overlapping liquefaction and earthquake-induced landslides. In addition, a fourth feature may be included representing areas not evaluated for liquefaction or earthquake-induced landslides. Developers of properties falling within any of the three zones may be required to investigate the potential hazard and mitigate its threat during the local permitting process.

This is a digital Seismic Hazard Zone Map presenting areas where liquefaction and landslides may occur during a strong earthquake. Three types of geological hazards, referred to as seismic hazard zones, may be featured on the map: 1) liquefaction, 2) earthquake-induced landslides, and 3) overlapping liquefaction and earthquake-induced landslides. In addition, a fourth feature may be included representing areas not evaluated for liquefaction or earthquake-induced landslides. Developers of properties falling within any of the three zones may be required to investigate the potential hazard and mitigate its threat during the local permitting process.