Temperature profiles were collected from XBT casts from a World-Wide distribution. Data were collected from MULTIPLE PLATFORMS from 03 June 1979 to 27 May 1988. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m.

Temperature profile data were collected from MBT casts from a World-Wide distribution. Data were collected from MULTIPLE PLATFORMS from 08 April 1948 to 14 December 1968. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. This file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Temperature profile data were collected using XBT and BT casts from NOAA Ship MALCOLM BALDRIGE and other platforms in a World-wide distribution from 22 June 1990 to 29 August 1991. Data were collected by the National Ocean Service (NOS) with support from the Deep Freeze project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Temperature profile data were collected using XBT and BT casts from NOAA Ship RESEARCHER and other platforms in a World-wide distribution from 30 September 1970 to 05 August 1979. Data were collected by the US NAVY; Ships of Opportunity. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments

Temperature profile data were collected using XBT and BT casts from NOAA Ship MALCOLM BALDRIGE and other platforms in a World-wide distribution from 10 March 1989 to 01 August 1990. Data were collected by the National Ocean Service (NOS) with support from the SubTropical Atlantic Climate Study (STACS) project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Temperature profile data were collected using bathythermograph (BT/XBT) casts from CHAIN in the Atlantic Ocean from May 25, 1973 to June 7, 1973. Data were submitted by Woods Hole Oceanographic Institution as part of the International Decade of Ocean Exploration / Mid-Ocean Dynamics Experiment (IDOE/MODE) project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m.

Temperature profiles were collected from XBT casts from the MELVILLE from 14 January 1977 to 10 February 1977. Data were collected by the Scripps Institute of Oceanography (SIO) as part of International Decade of Ocean Exploration / International Ocean Studies / First Dynamic Response and Kinematics Experiment in the Drake Passage (IDOE/ISOS/FDRAKE). Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of 450 m or 760 m. Special instruments permitted measurements to 1830 m.

Temperature profile data were collected using BT and XBT casts from the OCEANUS in the Northwest Atlantic Ocean. Data were collected from 09 November 1982 to 15 November 1982 by US Geological Survey (USGS) with support from the Outer Continental Shelf - Georges Bank (OCS - Georges Bank) project. Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

Temperature profile data were collected from XBT casts from the WASHINGTON STANDARD and other platforms from 18 October 1968 to 18 October 1972. Data were collected by the National Marine Fisheries Service (NMFS) as part of the International Decade of Ocean Exploration (IDOE). Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m.