To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20120427 to 20120524, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1201 in the Pacific Remote Island Areas region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 42 REA sites were surveyed at Jarvis in the Pacific Remote Island Areas region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20100904 to 20100929, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1007 in the Northwestern Hawaiian Islands region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 27 REA sites were surveyed at French Frigate in the Northwestern Hawaiian Islands region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 2010-01-21 to 2010-04-24, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1001 in the Pacific Remote Island Areas region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 33 REA sites were surveyed at Kingman in the Pacific Remote Island Areas region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20100904 to 20100929, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1007 in the Northwestern Hawaiian Islands region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 25 REA sites were surveyed at Lisianski in the Northwestern Hawaiian Islands region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20120427 to 20120524, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1201 in the Pacific Remote Island Areas region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 42 REA sites were surveyed at Palmyra in the Pacific Remote Island Areas region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 2010-02-17 to 2010-03-23, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1001 in the American Samoa region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 123 REA sites were surveyed at Tutuila in the American Samoa region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20101007 to 20101105, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1008 in the Main Hawaiian Islands region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 16 REA sites were surveyed at Lanai in the Main Hawaiian Islands region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20120401 to 20120426 and from 20120227 to 20120325, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1201 in the American Samoa region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 158 REA sites were surveyed at Tutuila in the American Samoa region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 2010-02-17 to 2010-03-23, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1001 in the American Samoa region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 30 REA sites were surveyed at Ofu & Olosega in the American Samoa region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20120227 to 20120325, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1201 in the Pacific Remote Island Areas region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 24 REA sites were surveyed at Baker in the Pacific Remote Island Areas region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.