This SEGS web service contains EPA facilities, EPA facilities labels, small- and large-scale versions of EPA region boundaries, and EPA region boundaries extended to the 200nm Exclusive Economic Zone (EEZ). Small scale EPA boundaries and boundaries extended to the EEZ render at scales of less than 5 million, large scale EPA boundaries draw at scales greater than or equal to 5 million. EPA facilities labels draw at scales greater than 2 million. Data used to create this web service are available as a separate download at the Secondary Linkage listed above. Full FGDC metadata records for each layer may be found by clicking the layer name in the web service table of contents (available through the online link provided above) and viewing the layer description. This SEGS dataset was produced by EPA through the Office of Environmental Information.

This downloadable package contains the following layers: EPA facility points, EPA region boundary polygons and EPA region boundary polygons extended to the 200nm Exclusive Economic Zone (EEZ). Included in this package are a file geodatabase (v. 10.0), Esri ArcMap map document (v. 10.0) and XML files for this record and the layer level metadata. This SEGS dataset was produced by EPA Office of Environmental Information (OEI).

This downloadable package contains the following layers: EPA facility points, EPA region boundary polygons and EPA region boundary polygons extended to the 200nm Exclusive Economic Zone (EEZ). Included in this package are a file geodatabase (v. 10.0), Esri ArcMap map document (v. 10.0) and XML files for this record and the layer level metadata. This SEGS dataset was produced by EPA Office of Environmental Information (OEI).

The EPA Metadata Editor (EME) allows users to create geospatial metadata that meets EPA's requirements. The tool has been developed as a desktop application that works as a standalone tool or as an extension to ESRI's ArcCatalog. It provides a customized editing environment that allows users to select EPA defaults within the user interface, while also allowing users the flexibility to specify their own defaults.

CPARD contains (1) EPA-approved State, Tribal and Federal certification plans required by the Federal Insecticide, Fungicide, Rodenticide Act to administer a certification program for applicators of restricted use pesticides; (2) information on plan reviews and approvals; and (3) State, Tribal and Federal annual reports required by 40 CFR 171.

This GIS dataset contains point features that represent healthcare facilities associated with three NAICS codes. The source of the data for these facilities is Homeland Infrastructure Foundation-Level Data (https://hifld-geoplatform.opendata.arcgis.com/datasets/hospitals). Calculations used to estimate annual excess food weight are described in EPAs 2019 publication: Technical Methodology for the EPA Excess Food Opportunities Map. The dataset contains 7,569 facilities.

This web feature service contains location and facility identification information from EPA's Facility Registry System (FRS) for the subset of facilities that link to the Toxic Release Inventory (TRI) System. TRI is a publicly available EPA database reported annually by certain covered industry groups, as well as federal facilities. It contains information about more than 650 toxic chemicals that are being used, manufactured, treated, transported, or released into the environment, and includes information about waste management and pollution prevention activities. FRS identifies and geospatially locates facilities, sites or places subject to environmental regulations or of environmental interest. Using vigorous verification and data management procedures, FRS integrates facility data from EPA's national program systems, other federal agencies, and State and tribal master facility records and provides EPA with a centrally managed, single source of comprehensive and authoritative information on facilities. This data set contains the subset of FRS integrated facilities that link to TRI facilities once the TRI data has been integrated into the FRS database. Additional information on FRS is available at the EPA website https://www.epa.gov/enviro/facility-registry-service-frs. These data are considered sensitive and are restricted to internal use only. The download file and map service are accessible only on the EPA intranet. EPA Category: Mission Sensitive, NARA Category: Critical Infrastructure.

This web feature service contains location and facility identification information from EPA's Facility Registry System (FRS) for the subset of facilities that link to the Toxic Release Inventory (TRI) System. TRI is a publicly available EPA database reported annually by certain covered industry groups, as well as federal facilities. It contains information about more than 650 toxic chemicals that are being used, manufactured, treated, transported, or released into the environment, and includes information about waste management and pollution prevention activities. FRS identifies and geospatially locates facilities, sites or places subject to environmental regulations or of environmental interest. Using vigorous verification and data management procedures, FRS integrates facility data from EPA's national program systems, other federal agencies, and State and tribal master facility records and provides EPA with a centrally managed, single source of comprehensive and authoritative information on facilities. This data set contains the subset of FRS integrated facilities that link to TRI facilities once the TRI data has been integrated into the FRS database. Additional information on FRS is available at the EPA website https://www.epa.gov/enviro/facility-registry-service-frs.

EF_ACRES is a subset of facilities from FRS_PROGRAM_FACILITY and associated best-available geospatial coordinates. Facility Registry Service (FRS) data are refrehsed daily. The layer shows only points from the 'ACRES' (Assessment, Cleanup and Redevelopment Exchange System) program.

This downloadable data package contains the following state level layers: Ozone 8-hr (1997 standard), Ozone 8-hr (2008 standard), Lead (2008 standard), SO2 1-hr (2010 standard), PM2.5 24hr (2006 standard), PM2.5 Annual (1997 standard), PM2.5 Annual (2012 standard), and PM10 (1987 standard). Included in this package are a file geodatabase and full FGDC metadata records for each layer. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www3.epa.gov/airquality/greenbook/index.html. Questions concerning the status of nonattainment areas, their classification and EPA policy should be