This web service contains the following layers: WWTP -NPDES and WTP. The WWTP-NPDES facilties have associated CONTACTS, NAIP, SIC, and STATE IDs information. Layers are drawn at a scale of 1: 2311162.217155 and larger. Data used to create this web service are available as a separate download at the Secondary Linkage listed above. Full FGDC metadata records for each layer may be found by clicking the layer name in the web service table of contents (available through the online link provided above) and viewing the layer description.

This web service contains the following layers: RMP, TRI, FRP, RCRATSD, CERCLIS, TSCA, and E-PLAN facilities and their associated CONTACTS, CHEMICALS, NAIP, SIC, and STATE IDs information. Layers are drawn at scale of 1: 18,489,297 and lower. Data used to create this web service are available as a separate download at the Secondary Linkage listed above. Full FGDC metadata records for each layer may be found by clicking the layer name in the web service table of contents (available through the online link provided above) and viewing the layer description. Data Dictionary available: https://ordsext.epa.gov/FLA/www3/ESF10_Supplemental_Metadata.docx

To improve public health and the environment, the United States Environmental Protection Agency (USEPA) collects information about facilities, sites, or places subject to environmental regulation or of environmental interest.

To improve public health and the environment, the United States Environmental Protection Agency (USEPA) collects information about facilities, sites, or places subject to environmental regulation or of environmental interest.

To improve public health and the environment, the United States Environmental Protection Agency (USEPA) collects information about facilities, sites, or places subject to environmental regulation or of environmental interest.

To improve public health and the environment, the United States Environmental Protection Agency (USEPA) collects information about facilities, sites, or places subject to environmental regulation or of environmental interest.

This web feature service contains location and facility identification information from EPA's Facility Registry System (FRS) for the subset of facilities that link to the Risk Management Plan (RMP) database. RMP stores the risk management plans reported by companies that handle, manufacture, use, or store certain flammable or toxic substances, as required under section 112(r) of the Clean Air Act (CAA). FRS identifies and geospatially locates facilities, sites or places subject to environmental regulations or of environmental interest. Using vigorous verification and data management procedures, FRS integrates facility data from EPA's national program systems, other federal agencies, and State and tribal master facility records and provides EPA with a centrally managed, single source of comprehensive and authoritative information on facilities. This data set contains the subset of FRS integrated facilities that link to RMP facilities once the RMP data has been integrated into the FRS database. Additional information on FRS is available at the EPA website https://www.epa.gov/enviro/facility-registry-service-frs.

This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that link to dischargers of air pollutants from the Integrated Compliance Information System for Air (AIR). ICIS-Air (AIR) – AIR is the modernization of the Air Facility System (AFS) into the Integrated Compliance Information System (ICIS). AIR contains enforcement, compliance, and permit data for stationary sources of air pollution regulated by the EPA, State, and Local air pollution agencies. A facility is classified as a Major Discharger if: a) Actual or potential emissions are above the applicable major source thresholds, or b) Actual or potential controlled emissions > 100 tons/year as per Alabama power decision, or c) Unregulated pollutant actual or potential controlled emissions > 100 tons/year as per Alabama power decision. FRS identifies and geospatially locates facilities, sites or places subject to environmental regulations or of environmental interest. Using vigorous verification and data management procedures, FRS integrates facility data from EPA's national program systems, other federal agencies, and State and tribal master facility records and provides EPA with a centrally managed, single source of comprehensive and authoritative information on facilities. This data set contains the subset of FRS integrated facilities that link to ICIS-Air (AIR) major facilities once the ICIS-Air (AIR) data has been integrated into the FRS database. Additional information on FRS is available at the EPA website https://www.epa.gov/enviro/facility-registry-service-frs.

This dataset contains location and facility identification information from EPA's Facility Registry System (FRS) for the subset of facilities that are active oil facilities subject to FRP. It includes FRP id, harm/determination category, OSRO, and harm factors, Using vigorous verification and data management procedures, FRS integrates facility data from EPA's national program systems, other federal agencies, and State and tribal master facility records and provides EPA with a centrally managed, single source of comprehensive and authoritative information on facilities. Additional information on FRS is available at the EPA website https://www.epa.gov/enviro/facility-registry-service-frs.

This web feature service contains location and facility identification information from EPA's Facility Registry System (FRS) for the subset of facilities that link to the Toxic Release Inventory (TRI) System. TRI is a publicly available EPA database reported annually by certain covered industry groups, as well as federal facilities. It contains information about more than 650 toxic chemicals that are being used, manufactured, treated, transported, or released into the environment, and includes information about waste management and pollution prevention activities. FRS identifies and geospatially locates facilities, sites or places subject to environmental regulations or of environmental interest. Using vigorous verification and data management procedures, FRS integrates facility data from EPA's national program systems, other federal agencies, and State and tribal master facility records and provides EPA with a centrally managed, single source of comprehensive and authoritative information on facilities. This data set contains the subset of FRS integrated facilities that link to TRI facilities once the TRI data has been integrated into the FRS database. Additional information on FRS is available at the EPA website https://www.epa.gov/enviro/facility-registry-service-frs.