This data set set contains calibrated images of eight known transiting extrasolar planetary systems (hot Jupiters) acquired by the Deep Impact High Resolution Visible CCD during the EPOCh phase of the EPOXI mission. From 22 January through 31 August 2008 the HRIV CCD collected over 172,000 usable, photometric-quality visible light images of these transiting planet systems: HAT-P-4, HAT-P-7, GJ 436, TrES-2, TrES-3, XO-2, XO-3, and WASP-3. Time series of continuous 50-second integrations were used with the clear filter (#6) to observe each system for about three weeks, typically covering five or more transits as well as secondary eclipses. An exception was XO-3 which was only observed briefly due to the spacecraft entering safe mode. The transiting planet systems were observed in the integrated light of the planet and star; no spatially resolved image of the planet was possible.

This data set set contains raw images of eight known transiting extrasolar planetary systems (hot Jupiters) acquired by the Deep Impact High Resolution Visible CCD during the EPOCh phase of the EPOXI mission. From 22 January through 31 August 2008 the HRIV CCD collected over 172,000 usable, photometric-quality visible light images of these transiting planet systems: HAT-P-4, HAT-P-7, GJ 436, TrES-2, TrES-3, XO-2, XO-3, and WASP-3. Time series of continuous 50-second integrations were used with the clear filter (#6) to observe each system for about three weeks, typically covering five or more transits as well as secondary eclipses. An exception was XO-3 which was only observed briefly due to the spacecraft entering safe mode. The transiting planet systems were observed in the integrated light of the planet and star; no spatially resolved image of the planet was possible.

This data set set contains raw images of eight known transiting extrasolar planetary systems (hot Jupiters) acquired by the Deep Impact High Resolution Visible CCD during the EPOCh phase of the EPOXI mission. From 22 January through 31 August 2008 the HRIV CCD collected over 172,000 usable, photometric-quality visible light images of these transiting planet systems: HAT-P-4, HAT-P-7, GJ 436, TrES-2, TrES-3, XO-2, XO-3, and WASP-3. Time series of continuous 50-second integrations were used with the clear filter (#6) to observe each system for about three weeks, typically covering five or more transits as well as secondary eclipses. An exception was XO-3 which was only observed briefly due to the spacecraft entering safe mode. The transiting planet systems were observed in the integrated light of the planet and star; no spatially resolved image of the planet was possible.

This data set contains aperture photometry of known transiting planet systems GJ 436, HAT-P-4, HAT-P-7, TrES-2, TrES-3, and WASP-3 derived from radiance calibrated, clear #6 filtered images acquired by the Deep Impact High Resolution Visible CCD from 22 January through 31 August 2008 during the EPOCh phase of the EPOXI mission. The photometry data were derived from time series of continuous 50-second integrations used to observe each system for about three weeks, typically covering five or more transits as well as secondary eclipses.

This data set contains aperture photometry of known transiting planet systems GJ 436, HAT-P-4, HAT-P-7, TrES-2, TrES-3, and WASP-3 derived from radiance calibrated, clear #6 filtered images acquired by the Deep Impact High Resolution Visible CCD from 22 January through 31 August 2008 during the EPOCh phase of the EPOXI mission. The photometry data were derived from time series of continuous 50-second integrations used to observe each system for about three weeks, typically covering five or more transits as well as secondary eclipses.

This data set contains a clear-filtered High Resolution Visible CCD (HRIV) point spread function (PSF) for exoplanet transit targets GJ 436, HAT-P-4, HAT-P-7, TrES-2, TrES-3, XO-2, and XO-3 and at least one filtered HRIV PSF for stellar calibrator targets for the EPOXI mission. The PSFs were produced by applying a drizzle method to sets of HRIV images of the targets acquired during 2008. A PSF for transit target WASP-3 was not produced due to a crowded star field.

This data set contains a clear-filtered High Resolution Visible CCD (HRIV) point spread function (PSF) for exoplanet transit targets GJ 436, HAT-P-4, HAT-P-7, TrES-2, TrES-3, XO-2, and XO-3 and at least one filtered HRIV PSF for stellar calibrator targets for the EPOXI mission. The PSFs were produced by applying a drizzle method to sets of HRIV images of the targets acquired during 2008. A PSF for transit target WASP-3 was not produced due to a crowded star field.

This data set contains calibrated, narrow band filter images (350-950 nm) of Earth acquired by the Deep Impact High Resolution Visible CCD (HRIV) during the EPOCh and Cruise 2 phases of the EPOXI mission. Five sets of observations were acquired on 18-19 March, 28-29 May and 04-05 June 2008 and on 27-28 March and 04-05 October 2009 to characterize Earth as an analog for extrasolar planets. Each observing period lasted approximately 24 hours. HRIV images were acquired once per hour with the filters centered on 350, 750 and 950 nm, whereas the 450-, 550-, 650-, and 850-nm data were taken every 15 minutes. During the observing period in May 2008, the Moon transited across Earth as seen from the spacecraft. On 27 September 2009 during the first attempt of an Earth south polar observation, only seven HRIV frames were acquired before fault protection turned that instrument off; the full sequence was successfully rerun on 04-05 October 2009. Version 2.0 includes the application of a horizontal destriping process and revised electronic crosstalk calibration files.

This data set contains calibrated, narrow band filter images (350-950 nm) of Earth acquired by the Deep Impact High Resolution Visible CCD (HRIV) during the EPOCh and Cruise 2 phases of the EPOXI mission. Five sets of observations were acquired on 18-19 March, 28-29 May and 04-05 June 2008 and on 27-28 March and 04-05 October 2009 to characterize Earth as an analog for extrasolar planets. Each observing period lasted approximately 24 hours. HRIV images were acquired once per hour with the filters centered on 350, 750 and 950 nm, whereas the 450-, 550-, 650-, and 850-nm data were taken every 15 minutes. During the observing period in May 2008, the Moon transited across Earth as seen from the spacecraft. On 27 September 2009 during the first attempt of an Earth south polar observation, only seven HRIV frames were acquired before fault protection turned that instrument off; the full sequence was successfully rerun on 04-05 October 2009. Version 2.0 includes the application of a horizontal destriping process and revised electronic crosstalk calibration files.

This dataset contains calibrated clear-filter, CN, OH and dust continuum images of comet C/ISON (2012 S1) acquired by the Medium Resolution Visible CCD (MRI) from 17 January through 06 March 2013 during the Cruise 3 phase of the EPOXI mission.