This data set contains vector points depicting locations for access, anchorage, boat ramps, diving sites, locks and dams, marinas, and ports in Northwest Peninsular Florida. As a whole, the ESI data characterize the marine and coastal environments and wildlife by their sensitivity to spilled oil, and include information for three main components: shoreline habitats, sensitive biological resources, and human-use resources. The entirety of the ESI Human-Use data layers consists of: PARKS-MANAGED AREAS Polygons; NAVIGATION-MARINE Points; POLITICAL-JURISDICTIONAL Polygons, Points; RESOURCE MANAGEMENT Polygons, Points; SOCECON Polygons, Lines, Points; and NATURAL HAZARD Polygons.

CO-OPS has been involved with tsunami warning and mitigation since the Coast and Geodetic Survey started the Tsunami Warning System in 1948 to provide warnings to the Hawaiian Islands. After the December 2004 Indian Ocean tsunami, CO-OPS was tasked to coordinate with the NOAA Tsunami Warning Centers in upgrading existing stations with new Data Collection Platform (DCP) and communications technology and with expanding the tsunami warning capabilities of the National Water Level Observation Network (NWLON). Work began in 2005 to upgrade 33 existing water level stations and install 16 new stations from the Pacific Ocean to the Caribbean Sea by October 2006. As of September 2006, all 33 upgrades are complete, as well as 15 of the 16 new installations. As of October 2006, the NWLON consist of 196 long-term water level stations along all U.S. coasts, including the Great Lakes, Alaska, Hawaii, the Pacific Ocean Island Territories, Puerto Rico, and the U.S. Virgin Islands. The NOAA National Centers for Environmental Information (formerly National Geophysical Data Center) serves as the archive center for these data and provides the historical data to users.

The NOAA Hurricane Irma Project area data were collected by Quantum Spatial, Inc. (QSI) using three Riegl systems: a Riegl VQ-880-G+, a Riegl VQ-880-GII, and a Riegl VQ-880-GH. The project acquisition dates spanned from 20181120-20190323 in 85 missions. The final classified LiDAR data were transformed from WGS80 ellipsoid elevations to Geoid12b orthometric elevations and were then used to create topobathymetric bare earth digital elevation models (DEMs) in ERDAS Imagine (*.img) format with a 1m pixel resolution. Ground (2), bathymetric bottom (40), and submerged objects (43) classified points were used in the bare earth DEM creation. The NOAA Hurricane Irma Project digital elevation model (DEM) dataset consists of a bathymetric void clipped bare earth model and an interpolated bare earth model. The 100 meter buffered project area consists of approximately 1,381,270 acres and stretches from the eastern coast of Miami south and westward to the Marquesas Keys. DEM files were compiled in 5,000 m x 5,000 m tiles and clipped to the project boundary. The full project dataset is comprised of 300 - 5,000 m x 5,000 m DEM tiles.

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

CO-OPS has been involved with tsunami warning and mitigation since the Coast and Geodetic Survey started the Tsunami Warning System in 1948 to provide warnings to the Hawaiian Islands. After the December 2004 Indian Ocean tsunami, CO-OPS was tasked to coordinate with the NOAA Tsunami Warning Centers in upgrading existing stations with new Data Collection Platform (DCP) and communications technology and with expanding the tsunami warning capabilities of the National Water Level Observation Network (NWLON). Work began in 2005 to upgrade 33 existing water level stations and install 16 new stations from the Pacific Ocean to the Caribbean Sea by October 2006. As of September 2006, all 33 upgrades are complete, as well as 15 of the 16 new installations. As of October 2006, the NWLON consist of 196 long-term water level stations along all U.S. coasts, including the Great Lakes, Alaska, Hawaii, the Pacific Ocean Island Territories, Puerto Rico, and the U.S. Virgin Islands. The NOAA National Centers for Environmental Information (formerly National Geophysical Data Center) serves as the archive center for these data and provides the historical data to users.

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.