This dataset contains a unified GeoTiff with 30x30 meter cell size representing the bathymetry of several deep coral priority areas off the South Atlantic Bight, derived from data collected in 2003. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with the College of Charleston, as well as the United State Navy Ship Pathfinder (USNS) , and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 06/14/03 to 07/6/03. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by the College of Charleston Department of Geology using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM Zone 17 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Fledermaus FMGT software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 30x30 meter cell size representing the slope (in degrees) of the 2003 multibeam bathymetry of the Charleston Bump off of the South Atlantic Bight, derived from data collected in 2003. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with the College of Charleston, as well as the United States Navy Ship Pathfinder (USNS) , and private sector partners, acquired multibeam bathymetry data in the South Atlantic Bight from 06/14/2003 to 07/6/2003. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM Zone 17 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas. Slope was derived from this surface using the slope calculator, a function of ESRI Arc10 Spatial Analyst Slope tool extension.

This dataset contains a unified GeoTiff with 30x30 meter cell size representing the slope (in degrees) of the 2003 multibeam bathymetry of the Charleston Bump off of the South Atlantic Bight, derived from data collected in 2003. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with the College of Charleston, as well as the United States Navy Ship Pathfinder (USNS) , and private sector partners, acquired multibeam bathymetry data in the South Atlantic Bight from 06/14/2003 to 07/6/2003. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM Zone 17 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas. Slope was derived from this surface using the slope calculator, a function of ESRI Arc10 Spatial Analyst Slope tool extension.

This dataset contains a unified GeoTiff with 30x30 meter cell size representing the bathymetry of several deep coral priority areas off the South Atlantic Bight, derived from data collected in 2003. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with the College of Charleston, as well as the United State Navy Ship Pathfinder (USNS) , and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 06/14/03 to 07/6/03. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by the College of Charleston Department of Geology using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM Zone 17 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas.

This dataset contains a unified GeoTiff with 30x30 meter cell size representing the bathymetry of several deep coral priority areas off the South Atlantic Bight, derived from data collected in 2003. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with the College of Charleston, as well as the United State Navy Ship Pathfinder (USNS) , and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 06/14/03 to 07/6/03. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by the College of Charleston Department of Geology using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM Zone 17 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas.Rugosity was derived from this surface using NOAA's Benthic Terrain Modeler extension.

This dataset contains a unified GeoTiff with 30x30 meter cell size representing the bathymetry of several deep coral priority areas off the South Atlantic Bight, derived from data collected in 2003. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with the College of Charleston, as well as the United State Navy Ship Pathfinder (USNS) , and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 06/14/03 to 07/6/03. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by the College of Charleston Department of Geology using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM Zone 17 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas.Rugosity was derived from this surface using NOAA's Benthic Terrain Modeler extension.

This dataset contains a unified GeoTiff with 30x30 meter cell size representing the bathymetry of several deep coral priority areas off the South Atlantic Bight, derived from data collected in 2003. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with the College of Charleston, as well as the United State Navy Ship Pathfinder (USNS) , and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 06/14/03 to 07/6/03. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by the College of Charleston Department of Geology using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM Zone 17 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas.

This dataset contains a unified GeoTiff with 10x10 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the South Atlantic Bight, derived from data collected in September 2009. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Nancy Foster, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 9/3/09 to 9/7/09. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 5x5 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the South Atlantic Bight, derived from data collected in September 2007. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Nancy Foster, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 6/4/07 to 6/9/07. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 4.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 30x30 meter cell size representing the slope (in degrees) of the multibeam bathymetry of the Charleston Bump off of the South Atlantic Bight, derived from data collected in 2007 by the NOAA Ship Thomas Jefferson. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with the College of Charleston, as well as the personal aboard the NOAA Ship Thomas Jefferson , and private sector partners, acquired multibeam bathymetry data in the South Atlantic Bight from 05/23/2007 to 05/28/2007. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM Zone 17 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas. Slope was derived from this surface using the slope calculator, a function of ESRI Arc10 Spatial Analyst Slope tool extension.