This dataset contains a unified GeoTiff with 3x3 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the Atlantic Coast of Florida, derived from data collected from the Lost Coast Explorer in October 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the Atlantic Coast of Florida from 10/28/2010 to 10/31/2010. Data was acquired with a hull-mounted Kongsberg EM 710 multibeam echosounder (70 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 3x3 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the Atlantic Coast of Florida, derived from data collected from the Lost Coast Explorer in October 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the Atlantic Coast of Florida from 10/26/2010 to 10/27/2010. Data was acquired with a hull-mounted Kongsberg EM 710 multibeam echosounder (70 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 3x3 meter cell size representing bathymetry of several deep coral priority areas off the Atlantic Coast of Florida, derived from data collected in November 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the Atlantic Coast of Florida from 10/26/2010 to 10/27/2010. Data was acquired with a hull-mounted Kongsberg EM 710 multibeam echosounder (70 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas.

This dataset contains a unified GeoTiff with 3x3 meter cell size representing the slope (in degrees) of several deep coral priority areas off the Atlantic Coast of Florida, derived from data collected in October 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the Atlantic Coast of Florida from the Lost Coast Explorer on 10/26/2010 to 10/27/2010. Data was acquired with a hull-mounted Kongsberg EM 710 multibeam echosounder (70 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas. Slope was derived from this surface using the slope calculator, a function of ESRIs Spatial Analyst extension.

This dataset contains a unified GeoTiff with 3x3 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the Atlantic Coast of Florida, derived from data collected from the Lost Coast Explorer in October 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the Atlantic Coast of Florida from 10/28/2010 to 10/31/2010. Data was acquired with a hull-mounted Kongsberg EM 710 multibeam echosounder (70 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 10x10 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the South Atlantic Bight, derived from data collected in September 2009. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Nancy Foster, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 9/3/09 to 9/7/09. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 10x10 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the South Atlantic Bight, derived from data collected in November 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 11/13/2010 to 11/22/2010. Data was acquired with a hull-mounted Kongsberg Simrad EM 122 multibeam echosounder (100 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 5x5 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the South Atlantic Bight, derived from data collected in September 2007. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Nancy Foster, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 6/4/07 to 6/9/07. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 4.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This dataset contains a unified GeoTiff with 3x3 meter cell size representing bathymetry of several deep coral priority areas off the Atlantic Coast of Florida, derived from data collected in November 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the Atlantic Coast of Florida from 10/28/2010 to 10/31/2010. Data was acquired with a hull-mounted Kongsberg EM 710 multibeam echosounder (70 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas.

This dataset contains a unified GeoTiff with 3x3 meter cell size representing the slope (in degrees) of several deep coral priority areas off the Atlantic Coast of Florida, derived from data collected in November 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the Atlantic Coast of Florida from the Lost Coast Explorer on 10/28/2010 to 10/31/2010. Data was acquired with a hull-mounted Kongsberg EM 710 multibeam echosounder (70 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. The CARIS Export option "BASE Surface to Image" was then used to create a GeoTiff of the priority areas. Slope was derived from this surface using the slope calculator, a function of ESRI's Spatial Analyst extension.