In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. The riparian-zone boundaries were created from stream centerlines digitized from imagery (hereinafter the "digitized riparian reach") that were buffered by 50 meters on each side of the stream centerline. The length of the digitized riparian reach was calculated as the distance in kilometers equal to the base-10 logarithm of the geospatially-derived watershed area, in kilometers squared (Johnson and Zelt, 2005). This dataset represents the riparian zones in the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset defines the geographic extent of the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset defines the geographic extent of the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the Regional Stream Quality Assessment (RSQA) study was started as part of the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA) project. One of the objectives of the RSQA is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Garrett and others, 2017; Journey and others, 2015; Coles and others, 2019; Sheibley and others, 2017; May and others, 2020). The study was implemented in five regions across the United States (U.S.); the Midwest (MSQA) in 2013, the Southeast (SESQA) in 2014, the Pacific Northwest (PNSQA) in 2015, the Northeast (NESQA) in 2016, and California (CSQA) in 2017. To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of each study region, sampled sites, and corresponding watersheds and riparian zones. This dataset represents the riparian-zone boundaries for 476 water-quality sites sampled for the RSQA and is one of the four fundamental geospatial data layers that were developed for the RSQA study.

In 2013, the Regional Stream Quality Assessment (RSQA) study was started as part of the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA) project. One of the objectives of the RSQA is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Garrett and others, 2017; Journey and others, 2015; Coles and others, 2019; Sheibley and others, 2017; May and others, 2020). The study was implemented in five regions across the United States (U.S.); the Midwest (MSQA) in 2013, the Southeast (SESQA) in 2014, the Pacific Northwest (PNSQA) in 2015, the Northeast (NESQA) in 2016, and California (CSQA) in 2017. To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of each study region, sampled sites, and corresponding watersheds and riparian zones. This dataset represents the riparian-zone boundaries for 476 water-quality sites sampled for the RSQA and is one of the four fundamental geospatial data layers that were developed for the RSQA study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012a). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset represents the boundaries for the 100 watersheds studied in the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012a). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset represents the boundaries for the 100 watersheds studied in the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the Regional Stream Quality Assessment (RSQA) study was started as part of the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA) project. One of the objectives of the RSQA is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Garrett and others, 2017; Journey and others, 2015; Coles and others, 2019; Sheibley and others, 2017; May and others, 2020). The study was implemented in five regions across the United States (U.S.); the Midwest (MSQA) in 2013, the Southeast (SESQA) in 2014, the Pacific Northwest (PNSQA) in 2015, the Northeast (NESQA) in 2016, and California (CSQA) in 2017. To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of each study region, sampled sites, and corresponding watersheds and riparian zones. This dataset represents the delineated watersheds for the 492 water-quality sites (including boundaries representing the lower 5 kilometers (km) of watersheds for 180 of the sites) within the five regional study areas sampled for the RSQA and is one of the four fundamental geospatial data layers that were developed for the RSQA study.

In 2013, the Regional Stream Quality Assessment (RSQA) study was started as part of the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA) project. One of the objectives of the RSQA is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Garrett and others, 2017; Journey and others, 2015; Coles and others, 2019; Sheibley and others, 2017; May and others, 2020). The study was implemented in five regions across the United States (U.S.); the Midwest (MSQA) in 2013, the Southeast (SESQA) in 2014, the Pacific Northwest (PNSQA) in 2015, the Northeast (NESQA) in 2016, and California (CSQA) in 2017. To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of each study region, sampled sites, and corresponding watersheds and riparian zones. This dataset represents the delineated watersheds for the 492 water-quality sites (including boundaries representing the lower 5 kilometers (km) of watersheds for 180 of the sites) within the five regional study areas sampled for the RSQA and is one of the four fundamental geospatial data layers that were developed for the RSQA study.

In 2013, the Regional Stream Quality Assessment (RSQA) study was started as part of the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA) project. One of the objectives of the RSQA is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Garrett and others, 2017; Journey and others, 2015; Coles and others, 2019; Sheibley and others, 2017; May and others, 2020). The study was implemented in five regions across the United States (U.S.); the Midwest (MSQA) in 2013, the Southeast (SESQA) in 2014, the Pacific Northwest (PNSQA) in 2015, the Northeast (NESQA) in 2016, and California (CSQA) in 2017. To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of each study region, sampled sites, and corresponding watersheds and riparian zones. This dataset represents the five study region boundaries for the RSQA and is one of the four fundamental geospatial data layers that were developed for the RSQA study.