Hydrologic unit boundaries define the aerial extent of surface water drainage to a point. Hydrologic units through four levels were created in the 1970's and have been used extensively throughout the United States. During that time the U.S. Geological Survey (USGS) developed a hierarchical hydrologic unit code (HUC) for Hydrologic unit boundaries define the aerial extent of surface water drainage to a point. Hydrologic units through four levels were created in the 1970's and have been used extensively throughout the United States. During that time the U.S. Geological Survey (USGS) developed a hierarchical hydrologic unit code (HUC) for the United States. This system divides the country into 21 Regions, 222 Subregions, 352 Accounting Units, and 2,149 Cataloging Units based on surface hydrologic features. The smallest USGS unit (8-digit HU) is approximately 448,000 acres. During the late 1970's the Natural Resources Conservation Service (NRCS), formerly the Soil Conservation Service, initiated a national program to further subdivide HU's into smaller watersheds for water resources planning. A 3-digit extension was added to the 8-digit identification. By the early 1980's this 11-digit HU mapping was completed for most of the U.S. These data demonstrate Maryland's watersheds as represented by the federal Hydrologic Unit Code denoted by an 11-digit numerical code. The watersheds were defined using contours on U.S. Geological Survey (USGS) 7.5 minute quadrangle map sheets. The state has been divided into 138 watersheds that are identified by Maryland, using an 8-digit numerical code. These watersheds are equivalent to the HUC 11-digit codes. The watershed file is generally considered to be map accurate at a scale of 1:24,000. A new 12-digit watershed file is available from DNR which provides more detailed line work for over 1,100 watersheds which is approximately equivalent to the HUC 14-digit code.

The National Water Quality Network (NWQN) for Rivers and Streams includes 113 surface-water river and stream sites monitored by the U.S. Geological Survey (USGS) National Water Quality Program (NWQP). The NWQN represents the consolidation of four historical national networks: the USGS National Water-Quality Assessment (NAWQA) Project, the USGS National Stream Quality Accounting Network (NASQAN), the National Monitoring Network (NMN), and the Hydrologic Benchmark Network (HBN). The NWQN includes 22 large river coastal sites, 41 large river inland sites, 30 wadeable stream reference sites, 10 wadeable stream urban sites, and 10 wadeable stream agricultural sites. In addition to the 113 NWQN sites, 3 large inland river monitoring sites from the USGS Cooperative Matching Funds (Co-op) program are also included in this annual water-quality reporting Web site to be consistent with previous USGS studies of nutrient transport in the Mississippi-Atchafalaya River Basin. This data release contains geo-referenced digital data and associated attributes of watershed boundaries for 113 NWQN and 3 Co-op sites. Two sites, "Wax Lake Outlet at Calumet, LA"; 07381590, and "Lower Atchafalaya River at Morgan City, LA"; 07381600, are outflow distributaries into the Gulf of Mexico. Watershed boundaries were delineated for the portion of the watersheds between "Red River near Alexandria, LA"; 07355500 and "Atchafalaya River at Melville, LA"; 07381495 to the two distributary sites respectively. Drainage area was undetermined for these two distributary sites because the main stream channel outflows into many smaller channels so that streamflow is no longer relative to the watershed area. NWQN watershed boundaries were derived from the Watershed Boundary Dataset-12-digit hydrologic units (WBD-12). The development of the WBD-12 was a coordinated effort between the United States Department of Agriculture-Natural Resources Conservation Service (USDA-NRCS), the USGS, and the Environmental Protection Agency (EPA) (U.S. Department of Agriculture-Natural Resources Conservation Service, 2012). A hydrologic unit is a drainage area delineated to nest in a multi-level, hierarchical drainage system. Its boundaries are defined by hydrographic and topographic criteria that delineate an area of land upstream from a specific point on a river, stream or similar surface waters. The United States is divided and sub-divided into successively smaller hydrologic units identified by a unique hydrologic unit code (HUC) consisting of two to 12 digits based on the six levels of classification in the hydrologic unit system: regions, sub-regions, accounting units, cataloging units, watersheds, and sub-watersheds. NWQN watershed boundaries were delineated by selecting all sub-watershed polygons that flow into the most downstream WBD-12 polygon in which the NWQN site is located. The WBD-12 attribute table contains 8-digit, 10-digit, and 12-digit HUCs which were used to identify which sub-watersheds flow into the watershed pour point at the NWQN site location. When the NWQN site was located above the pour point of the most downstream sub-watershed, the sub-watershed was edited to make the NWQN site the pour point of that sub-watershed. To aid editing, USGS 1:24,000 digital topographic maps were used to determine the hydrologic divide from the sub-watershed boundary to the NWQN pour point. The number of sub-watersheds which are contained within the NWQN watersheds ranged from less than one to nearly 32,000 internal sub-watersheds. Internal sub-watershed boundaries were dissolved so that a single watershed boundary was generated for each NWQN watershed. Data from this release are presented at the USGS Tracking Water Quality page: http://cida.usgs.gov/quality/rivers/home (Deacon and others, 2015). Watershed boundaries delineated for this release do not take into account non-contributing area, diversions out of the watershed, or return flows into the watershed. Delineations are based

Abstract: This file contains Hydrologic Unit (HU) polygon boundaries for the United States, Puerto Rico, and the U.S. Virgin Islands. The data is a seamless National representation of HU boundaries from 2 to 14 digits compiled from U.S. Geological Survey (USGS) National Hydrography Dataset (NHD) and U.S. Department of Agriculture (USDA) National Resources Conservation Service (NRCS) Watershed Boundary Dataset (WBD) sources. Purpose: This data is intended primarily for geographic display and analysis of regional and national data, and can also be used for illustration purposes at intermediate or small scales (1:250,000 to 1:2,000,000). See https://apps.nationalmap.gov/help/ for assistance with The National Map viewer, download client, services, or metadata.

This dataset is the digital hydrologic unit boundary layer for the 8-digit subwatershed boundaries for the conterminous United States. This dataset is intended to be used with the following two tabular dBase files: https://water.usgs.gov/lookup/getspatial?ds573_tillage_lu92e and https://water.usgs.gov/lookup/getspatial?ds573_tillage_lu01. The two tabular datasets contain the Tillage Practices in the Conterminous United States, 1989-2004---Datasets Aggregated by Watershed. This dataset and the two tabular datasets can be linked using the common attribute HUC8_N. Information about how the tabular data and geospatial data can be related are given in the data series report: https://pubs.usgs.gov/ds/ds573/ .The original dataset is the 12-digit Subwatershed boundaries (WBD_archive_17nov2009_9.2_file). The 12-digit boundaries were dissolved to 8-digit boundaries to be used with the two tabular .dbase data files containing the tillage practice data for the United States. ORIGINAL METADATA: This data set is a complete digital hydrologic unit boundary layer to the Subwatershed (12-digit) 6th level for the entire United States. This data set consists of geo-referenced digital data and associated attributes created in accordance with the "Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3" (04/01/2009). http://www.ncgc.nrcs.usda.gov/products/datasets/watershed/index.html . Polygons are attributed with hydrologic unit codes for 4th level sub-basins, 5th level watersheds, 6th level subwatersheds, name, size, downstream hydrologic unit, type of watershed, non-contributing areas and flow modification.

This dataset is the digital hydrologic unit boundary layer for the 8-digit subwatershed boundaries for the conterminous United States. This dataset is intended to be used with the following two tabular dBase files: https://water.usgs.gov/lookup/getspatial?ds573_tillage_lu92e and https://water.usgs.gov/lookup/getspatial?ds573_tillage_lu01. The two tabular datasets contain the Tillage Practices in the Conterminous United States, 1989-2004---Datasets Aggregated by Watershed. This dataset and the two tabular datasets can be linked using the common attribute HUC8_N. Information about how the tabular data and geospatial data can be related are given in the data series report: https://pubs.usgs.gov/ds/ds573/ .The original dataset is the 12-digit Subwatershed boundaries (WBD_archive_17nov2009_9.2_file). The 12-digit boundaries were dissolved to 8-digit boundaries to be used with the two tabular .dbase data files containing the tillage practice data for the United States. ORIGINAL METADATA: This data set is a complete digital hydrologic unit boundary layer to the Subwatershed (12-digit) 6th level for the entire United States. This data set consists of geo-referenced digital data and associated attributes created in accordance with the "Federal Guidelines, Requirements, and Procedures for the National Watershed Boundary Dataset; Chapter 3 of Section A, Federal Standards, Book 11, Collection and Delineation of Spatial Data; Techniques and Methods 11-A3" (04/01/2009). http://www.ncgc.nrcs.usda.gov/products/datasets/watershed/index.html . Polygons are attributed with hydrologic unit codes for 4th level sub-basins, 5th level watersheds, 6th level subwatersheds, name, size, downstream hydrologic unit, type of watershed, non-contributing areas and flow modification.

The Watershed Boundary Dataset (WBD) is a comprehensive aggregated collection of hydrologic unit data consistent with the national criteria for delineation and resolution. It defines the areal extent of surface water drainage to a point except in coastal or lake front areas where there could be multiple outlets as stated by the "Federal Standards and Procedures for the National Watershed Boundary Dataset (WBD)" "Standard" (https://pubs.usgs.gov/tm/11/a3/). Watershed boundaries are determined solely upon science-based hydrologic principles, not favoring any administrative boundaries or special projects, nor particular program or agency. This dataset represents the hydrologic unit boundaries to the 12-digit for the entire United States. Some areas may also include additional subdivisions representing the 14- and 16-digit hydrologic unit (HU). At a minimum, the HUs are delineated at 1:24,000-scale in the conterminous United States, 1:25,000-scale in Hawaii, Pacific basin and the Caribbean, and 1:63,360-scale in Alaska, meeting the National Map Accuracy Standards (NMAS). Higher resolution boundaries are being developed where partners and data exist and will be incorporated back into the WBD. WBD data are delivered as a dataset of polygons and corresponding lines that define the boundary of the polygon. WBD polygon attributes include hydrologic unit codes (HUC), size (in the form of acres and square kilometers), name, downstream hydrologic unit code, type of watershed, non-contributing areas, and flow modifications. The HUC describes where the unit is in the country and the level of the unit. WBD line attributes contain the highest level of hydrologic unit for each boundary, line source information and flow modifications. For additional information on NHD, go to https://www.usgs.gov/national-hydrography.

The Watershed Boundary Dataset (WBD) is a comprehensive aggregated collection of hydrologic unit data consistent with the national criteria for delineation and resolution. It defines the areal extent of surface water drainage to a point except in coastal or lake front areas where there could be multiple outlets as stated by the "Federal Standards and Procedures for the National Watershed Boundary Dataset (WBD)" "Standard" (https://pubs.usgs.gov/tm/11/a3/). Watershed boundaries are determined solely upon science-based hydrologic principles, not favoring any administrative boundaries or special projects, nor particular program or agency. This dataset represents the hydrologic unit boundaries to the 12-digit for the entire United States. Some areas may also include additional subdivisions representing the 14- and 16-digit hydrologic unit (HU). At a minimum, the HUs are delineated at 1:24,000-scale in the conterminous United States, 1:25,000-scale in Hawaii, Pacific basin and the Caribbean, and 1:63,360-scale in Alaska, meeting the National Map Accuracy Standards (NMAS). Higher resolution boundaries are being developed where partners and data exist and will be incorporated back into the WBD. WBD data are delivered as a dataset of polygons and corresponding lines that define the boundary of the polygon. WBD polygon attributes include hydrologic unit codes (HUC), size (in the form of acres and square kilometers), name, downstream hydrologic unit code, type of watershed, non-contributing areas, and flow modifications. The HUC describes where the unit is in the country and the level of the unit. WBD line attributes contain the highest level of hydrologic unit for each boundary, line source information and flow modifications. For additional information on NHD, go to https://www.usgs.gov/national-hydrography.