GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellarThe GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.

GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellarThe GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.

GLIMPSE3D is the third in a series of large area projects to map selected regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). GLIMPSEI1 covered the Galactic plane from |l| = 10◦ to 65◦ and |b| < 1◦; GLIMPSEII filled in the inner 20 degrees of the Galactic plane, |l| < 10◦, with vertical extensions up to ±1.5◦ for |l| =5◦to 2◦, and up to ±2◦ from |l| =2◦to 0◦. GLIMPSE3D adds vertical extensions, generally up to |b| < 3◦, but up to |b| < 4.2◦ in the center of the Galaxy. The goal of this coverage is to provide data to study the vertical stellar and interstellarThe GLIMPSE3D Archive (GLM3DA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSE3D Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.

GLIMPSE360 is a Warm Mission Spitzer Cycle 6 Exploration Science Program (PIDs 60020, 61070, 61071, 61072, 61073, 70072) that mapped 187 degrees of longitude of the Galactic plane that have not been mapped by previous Spitzer Galactic Plane surveys (GLIMPSE, GLIMPSEII, GALCEN, GLIMPSE3D, Vela Carina, SMOG and Cygnus-X). The specific Galactic longitudes covered by GLIMPSE360 are l=65◦-76◦, 82◦-102◦, and 109◦-265◦. The latitude range is about 2.8◦. The latitude center follows the Galactic warp. GLIMPSE360 completes the full circle of the Galactic plane.The GLIMPSE360 Archive (GLM360A or the “Archive”) consists of point sources with less stringent selection critera than the Catalog. The information provided is in the same format as the Catalog. The Catalog is a subset of the Archive, but the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.

Deep GLIMPSE is the sixth in a series of large area projects to map regions of the Galactic plane using the Spitzer Space Telescope Infrared Array Camera (IRAC). Deep GLIMPSE is a Warm Mission Spitzer Cycle 8 Exploration Science Program (PIDs 80074 and 80253) that mapped 125 degrees of longitude of the Far Side of the Galaxy. Warm Mission Spitzer has two IRAC bands, centered at approximately 3.6 and 4.5 μm. The Galactic longitudes covered by Deep GLIMPSE are l=265◦-350◦and 25◦-65◦. The latitude width is about 2.1◦. The latitude center follows the Galactic warp at a Galactocentric distance of 13 kpc to survey the Far Outer Galaxy.The Deep GLIMPSE Archive (GLMDPA or the “Archive”) consists of point sources with less stringent selection critera than the Catalog. The information provided is in the same format as the Catalog. The Catalog is a subset of the Archive, but the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.

The Galactic Legacy Infrared Mid-Plane Survey Extraordinaire (GLIMPSEI), using the Spitzer Space Telescope Infrared Array Camera (IRAC) surveyed approximately 220 square degrees of the Galactic plane, covering a latitude range of ±1◦, and a longitude range of |l| =10◦−65◦, plus the Observation Strategy Validation (OSV) region at l=284◦. The observations consisted of two 1.2 second integrations at each position, for a total of over 77,000 pointings and ∼310,000 IRAC frames in 400 hours total survey time. The survey consists of a point source Catalog, a point source Archive, and mosaicked images.The GLIMPSEI Archive (GLMIA or the “Archive”) consists of point sources with a signal- to-noise > 5 in at least one band and less stringent selection critera than the Catalog. The photometric uncertainty is typically < 0.3 mag. The GLIMPSEI Catalog is a subset of the Archive, but note that the entries for a particular source might not be the same due to additional nulling of magnitudes in the Catalog because of the more stringent requirements.

GLIMPSE360 is a Warm Mission Spitzer Cycle 6 Exploration Science Program (PIDs 60020, 61070, 61071, 61072, 61073, 70072) that mapped 187 degrees of longitude of the Galactic plane that have not been mapped by previous Spitzer Galactic Plane surveys (GLIMPSE, GLIMPSEII, GALCEN, GLIMPSE3D, Vela Carina, SMOG and Cygnus-X). The specific Galactic longitudes covered by GLIMPSE360 are l=65◦-76◦, 82◦-102◦, and 109◦-265◦. The latitude range is about 2.8◦. The latitude center follows the Galactic warp. GLIMPSE360 completes the full circle of the Galactic plane.The GLIMPSE360 Catalog (GLM360C, or the “Catalog”) consists of the highest reliability point sources. For each IRAC band the Catalog provides fluxes (with uncertainties), positions (with uncertainties), the areal density of local point sources, the local sky brightness, and a flag that provides information on source quality and known anomalies present in the data.

The Galactic Legacy Infrared Mid-Plane Survey Extraordinaire (GLIMPSEI), using the Spitzer Space Telescope Infrared Array Camera (IRAC) surveyed approximately 220 square degrees of the Galactic plane, covering a latitude range of ±1◦, and a longitude range of |l| =10◦−65◦, plus the Observation Strategy Validation (OSV) region at l=284◦. The observations consisted of two 1.2 second integrations at each position, for a total of over 77,000 pointings and ∼310,000 IRAC frames in 400 hours total survey time. The survey consists of a point source Catalog, a point source Archive, and mosaicked images.The GLIMPSEI Catalog (GLMIC, or the “Catalog”) consists of point sources whose selection criteria are determined by the requirement that the reliability be ≥99.5%. There is a range of limiting magnitudes depending on whether the source is in a sparsely populated or low background region or in a region of high diffuse background or high source density. The photometric uncertainty is typically < 0.2 mag.

The Galactic Legacy Infrared Mid-Plane Survey Extraordinaire (GLIMPSEII) imaged longitudes ±10◦ of the central region of the Galaxy. The latitude coverage is ±1◦ from |l| =10◦to 5◦, ±1.5◦ from |l| =5◦to 2◦, and ±2◦ from |l| =2◦to 0◦. GLIMPSEII coverage excludes the Galactic center region l=±1◦, b=±0.75◦ observed by the GALCEN GO program (PID=3677). GLIMPSEII had two-epoch coverage for a total of three visits on the sky. The observations consisted of two 1.2 second integrations at each position in the first epoch of data taking (September 2005) and a single 1.2 second integration at each position six months later (April 2006).The GLIMPSEII Epoch 2 More Reliable Archive (GLMIIEp2MRA) consists of higher reliability point sources than the Archive. It was produced for the single visit epoch 2 only source lists to provide a higher reliability source list than the Archive. No highly reliable Catalog is produced for this dataset since it requires a source be detected twice in one band. The sources in the More Reliable Archive have the same stringent criteria as the Catalog except two detections are not required in a single band. Two detections in adjacent bands are required (the “1” can include the 2MASS Ks band); for example one detection in band 1 and one detection in band 2.

The SAGE-SMC pro ject is a Cycle 4 legacy program on the Spitzer Space Telescope, entitled, SAGE-SMC: Surveying the Agents of Galaxy Evolution in the Tidally-Disrupted, Low-Metallicity Small Magellanic Cloud, with Karl Gordon (STScI) as the PI. The project overview and initial results are described in a paper by Gordon et al. (2010, in prep). The SMC was mapped at two different epochs dubbed Epochs 1 and 2 separated by 3 (IRAC) and 9 (MIPS) months, as this provides a 90-degree roll angle in the orientation of the detectors, which optimally removes the striping artifacts in MIPS and artifacts along columns and rows in the IRAC image data. In addition, these two epochs are useful constraints of source variability expected for evolved stars and some young stellar ob jects (YSOs). The IRAC and MIPS observations from the S3MC pathfinder survey of the inner 3 sq. deg. of the SMC (PI: Bolatto, referred to as Epoch 0) have been reduced using the same software. In comparison to the catalog, the archive has more source fluxes (fewer nulled wavelengths) and some more sources but these additions have more uncertainty associated with them. For the catalog, a source must be detected in at least 60% of the observations at that wavelength, at least 32% of the observations in an adjacent band (the confirming band), and the S/N must be greater than [5, 5, 5, 7] for IRAC bands [3.6um], [4.5um], [5.8um] and [8.0um]. The 2MASS K_s band is counted as a detection. For a typical source, extracted from 2x12 sec frametime images, the minimum detection criterion amounts to being detected twice in one band (usually band 1 or 2) and once in an adjacent band (sometimes referred to as the 2+1 criterion). For the catalog, sources with neighbors within a 2" radius are excluded (culled). For the archive, sources within a 0.5" are excluded. For more details, see Section 3.3 of the SAGE-SMC Data Delivery Document.