This feature class represents an index of records from the California Department of Water Resources' (DWR) Online System for Well Completion Reports (OSWCR). This feature class is for informational purposes only. All attribute values should be verified by reviewing the original Well Completion Report. Known issues include: - Missing and duplicate records - Missing values (either missing on original Well Completion Report, or not key entered into database) - Incorrect values (e.g. incorrect Latitude, Longitude, Record Type, Planned Use, Total Completed Depth) - Limited spatial resolution: The majority of well completion reports have been spatially registered to the center of the 1x1 mile Public Land Survey System section that the well is located in.

This feature class represents an index of records from the California Department of Water Resources' (DWR) Online System for Well Completion Reports (OSWCR). This feature class is for informational purposes only. All attribute values should be verified by reviewing the original Well Completion Report. Known issues include: - Missing and duplicate records - Missing values (either missing on original Well Completion Report, or not key entered into database) - Incorrect values (e.g. incorrect Latitude, Longitude, Record Type, Planned Use, Total Completed Depth) - Limited spatial resolution: The majority of well completion reports have been spatially registered to the center of the 1x1 mile Public Land Survey System section that the well is located in.,

This feature class represents an index of records from the California Department of Water Resources' (DWR) Online System for Well Completion Reports (OSWCR). This feature class is for informational purposes only. All attribute values should be verified by reviewing the original Well Completion Report. Known issues include: - Missing and duplicate records - Missing values (either missing on original Well Completion Report, or not key entered into database) - Incorrect values (e.g. incorrect Latitude, Longitude, Record Type, Planned Use, Total Completed Depth) - Limited spatial resolution: The majority of well completion reports have been spatially registered to the center of the 1x1 mile Public Land Survey System section that the well is located in.

This is a point feature class of all groundwater elevation monitoring stations (wells) maintained in the California Department of Water Resources’ (hereafter the Department) Enterprise Water Management database. Individual station information comes from a wide variety of sources, including and local and federal agencies, that conduct groundwater elevation monitoring within the state of California.

This dataset depicts contours of estimated change in groundwater piezometric surfaces in the unconfined or uppermost semi-confined aquifers, between two specified years, by season. Contours represent change in groundwater level (elevation) by year and season (fall or spring). The contour interval is 10 ft.

This dataset depicts contours of estimated change in groundwater piezometric surfaces in the unconfined or uppermost semi-confined aquifers, between two specified years, by season. Contours represent change in groundwater level (elevation) by year and season (fall or spring). The contour interval is 10 ft. The contours represent lines of equal change in groundwater level surface. Positive values indicate groundwater has risen (groundwater surface elevation has increased) from the early year to the late year, while negative values indicate groundwater level surface has fallen (decreased in elevation ) from the early year to the late year.Water level measurements used for contouring are selected based on measurement date and well construction information, where available, and approximate groundwater levels in the unconfined to uppermost semi-confined aquifers. For more information on this service, please contact: gis@water.ca.gov

This polygon feature class is a data set compiled by DWR employees in 2013 and represents the statewide Groundwater Management Plan (Plan) boundaries predating the Sustainable Groundwater Management Act (SGMA) requirements. Each polygon represents the area in which a Plan is to be implemented. The boundaries were provided to DWR by the affiliated public agency and compiled into a single statewide data set. Spatial plan boundaries were provided by agencies to DWR either via shapefiles or PDFs. PDFs were georeferenced and turned into GIS layers by DWR employees.This feature class is for legacy purposes only and will not be changed nor updated. It needs to be memorialized for spatial coverage of Groundwater Management Plans prior to SGMA and because SGMA only requires medium and high priority basins to have a Groundwater Sustainability Plan. The Plans outlined in this shapefile by medium and high priority basins are in effect until SGMA goes into effect. Some low and very low priority basins will likely use the existing plans to get funding for future basin management (since it is only voluntary for them to provide a Plan under SGMA, but they already have one in place). The data set is considered complete because of its legacy status. However, anyone using the data set will notice boundary inconsistencies, agency plan overlaps, mismatches, and other topology errors. The data set is based on boundary estimations and in the cases of medium and high priority basins will be outdated with in implementation of SGMA. Pre-SGMA Statewide Groundwater Management Plans based on legislative actions: AB3030 (signed into law in 1992), SB 1938 (signed into law in 2002), and AB 359 (signed into law in 2011). For Groundwater Management Plan documents please email SGMPS@water.ca.gov.There are no access nor distribution constraints.There will be no resource maintenance nor update frequency.

This Well Completion Report geospatial dataset represents an index to a subset of records available from the California Department of Water Resources' (DWR) Online System for Well Completion Reports (OSWCR). This release contains water supply well records from Amador, Calaveras, El Dorado, Nevada, Placer, Sacramento, San Bernardino, Sutter, and Yuba counties. The USGS California Water Science Center GAMA project has provided additional attributes: top of open interval; number of open intervals; and various other identifiers such as public supply well number and USGS site number where they can be identified. In some cases, locations are georeferenced to finer resolution based on county APN or 911 geospatial datasets. The attributed information is linked to the redacted publicly available image when the link can be resolved. This dataset is for information purposes only. All attribute values should be verified by reviewing the original Well Completion Report. California Water Code Section 13752 allows for the release of redacted copies of well completion reports to the public. DWR is the authoritative source of these data. https://data.ca.gov/dataset/well-completion-reports

This online map represents oil and gas wells in the CalGEM Well Statewide Tracking and Reporting System, or WellSTAR. Wells are displayed by well type and well status.,

This Well Completion Report dataset represents an index of records from the California Department of Water Resources' (DWR) Online System for Well Completion Reports (OSWCR). This dataset is for informational purposes only. All attribute values should be verified by reviewing the original Well Completion Report. Known issues include: - Missing and duplicate records - Missing values (either missing on original Well Completion Report, or not key entered into database) - Incorrect values (e.g. incorrect Latitude, Longitude, Record Type, Planned Use, Total Completed Depth) - Limited spatial resolution: The majority of well completion reports have been spatially registered to the center of the 1x1 mile Public Land Survey System section that the well is located in.