데이터셋 상세
미국
Idaho Lidar Consortium (ILC): Clear Creek
The lidar survey was conducted by vendor Earth Eye LLC, 3680 Avalon Park Blvd. The data were delivered in LAS 1.1 format with information on return number, easting, northing, elevation, scan angle, and intensity for each return. This project is the data acquisition phase of a administrative study being done in collaboration with the Nez Perce National Forest, Grangeville, ID; Forest Service Region 1 Regional Office, Missoula, MT (Forest Inventory and Analysis and Remote Sensing/ Geospatial Team); and Rocky Mountain Research Station - Forest Sciences Lab, Moscow, ID. The primary goal of the study is to provide operational implementation of Lidar technology in support of project level planning. The proposed applications of Lidar in support of planning are: vegetation structural modeling, erosion modeling, fuels, transportation planning, timber system planning, wildlife habitat modeling, and stream quality. The Rocky Mountain Research Station will provide the development of peer-reviewed forest structural metrics and technical support in implementation of Lidar technology. The technical specifications have been defined to specifically support vegetation modeling using Lidar data. The project area consists of one contiguous blocks totaling 17, 325 hectares in north central Idaho. The project area consists of moderately variable topographic configurations with diverse vegetation components. Clear Creek is a tributary of the Middle Fork Clearwater River located east of Kooskia, Idaho. Vegetation is variable, transitioning from low elevation shrubland and mixed conifers to upper elevation spruce-fir. Ponderosa pine (Pinus ponderosa) and Douglas-fir (Pseudotsuga menziesii) are the predominant species at lower to mid elevations occupying a fairly xeric setting transitioning to grand fir (Abies grandis) and western red cedar (Thuja plicata) at mid elevations and subalpine fir (Abies lasiocarpa) at the higher elevations.
데이터 정보
연관 데이터
Idaho Lidar Consortium (ILC): Lolo Creek and Slate Creek
공공데이터포털
Lidar instrument was flown with a Leica ALS50 Lidar system over the period of September 29 - October 3, 2006. This project is the data acquisition phase of a administrative study being done in collaboration with the Nez Perce National Forest, Grangeville, ID; Forest Service Region 1 Regional Office, Missoula, MT (Forest Inventory and Analysis and Remote Sensing/ Geospatial Team); and Rocky Mountain Research Station - Forest Sciences Lab, Moscow, ID. The primary goal of the study is to provide operational implementation of Lidar technology in support of project level planning. The proposed applications of Lidar in support of planning are: vegetation structural modeling, erosion modeling, fuels, transportation planning, timber system planning, wildlife habitat modeling, and stream quality. The Rocky Mountain Research Station will provide the development of peer-reviewed forest structural metrics and technical support in implementation of Lidar technology. The technical specifications have been defined to specifically support vegetation modeling using Lidar data. The project area consists of two contiguous blocks totaling 42,889 hectares in north central Idaho. The project area consists of moderately variable topographic configurations with diverse vegetation components. Vegetation is variable, transitioning from low elevation shrubland and mixed conifers to upper elevation spruce-fir. Ponderosa pine (Pinus ponderosa) and Douglas-fir (Pseudotsuga menziesii) are the predominant species at lower to mid elevations occupying a fairly xeric setting transitioning to grand fir (Abies grandis) and western red cedar (Thuja plicata) at mid elevations and subalpine fir (Abies lasiocarpa) at the higher elevations.
Idaho Lidar Consortium (ILC): Moscow Mountain
공공데이터포털
This is collection level metadata for LAS files collected by USDA - Forest Service as a part of a larger project to use Lidar for forestry application. The lidar survey was conducted by vendor Horizon's, 3600 Jet Drive, South Dakota. Lidar instrument was flown with Leica ALS40 over the period of Aug, 13-14, 2003. The data were delivered in ASCII format with information on return number, easting, northing, elevation and intensity for each return. The ascii files were converted to las format and classified using the Multiscale Curvature Classification (MCC) method of Evans and Hudak (2007). The primary goal of the study is to provide operational implementation of Lidar technology in support of project level planning. The proposed applications of Lidar in support of planning are: vegetation structural modeling, erosion modeling, fuels, transportation planning, timber system planning, wildlife habitat modeling, and stream quality. The Rocky Mountain Research Station will provide the development of peer-reviewed forest structural metrics and technical support in implementation of Lidar technology. The technical specifications have been defined to specifically support vegetation modeling using Lidar data. The project area consists of one contiguous blocks totaling 32708 hectares in Moscow Mountain, Moscow, north central Idaho. The project area consists of moderately variable topographic configurations with diverse vegetation components.
Idaho Lidar Consortium (ILC): St. Joe National Forest
공공데이터포털
The lidar survey was conducted by vendor Horizon's, 3600 Jet Drive, Rapid City, South Dakota. Lidar instrument was flown in a Leica ALS40 on July 23, August 11 or September 22, 2003. The data were delivered in ascii format with information on return number, easting, northing, elevation and intensity for each return. The ascii files were converted to las format and classified using the Multiscale Curvature Classification (MCC) method of Evans and Hudak (2007). This project is the data acquisition phase of an administrative study being done by Rocky Mountain Research Station - Forest Sciences Lab, Moscow, ID. The primary goal of the study is to provide operational implementation of Lidar technology in support of project level planning. The proposed applications of Lidar in support of planning are: vegetation structural modeling, erosion modeling, fuels, transportation planning, timber system planning, wildlife habitat modeling, and stream quality. The Rocky Mountain Research Station will provide the development of peer-reviewed forest structural metrics and technical support in implementation of Lidar technology. The technical specifications have been defined to specifically support vegetation modeling using Lidar data. The St. Joe National Forest area consists of one contiguous block totaling ~ 55684 hectares in north central Idaho, between Deary and Clarkia. The project area consists of moderately variable topographic configurations with diverse vegetation components.
Idaho Lidar Consortium (ILC): Emerald Creek
공공데이터포털
The lidar survey was conducted by vendor Spectrum Mapping LCC, a Lidar company. Lidar instrument Datis II sensor was flown over the period of 10 and 12 July 2004. The data were delivered in ASCII format (files separated by vegetation points and ground points) with information on X, Y, elevation, Return number, RGB and scan angle. The primary goal of the study is to provide operational implementation of Lidar technology in support of project level planning. The proposed applications of Lidar in support of planning are: vegetation structural modeling, erosion modeling, fuels, transportation planning, timber system planning, wildlife habitat modeling, and stream quality. The Rocky Mountain Research Station will provide the development of peer-reviewed forest structural metrics and technical support in implementation of Lidar technology. The technical specifications have been defined to specifically support vegetation modeling using Lidar data. The project area consists of one contiguous blocks totaling 13234 hectares in Emerald Creek, St. Joe National Forest, Idaho. The project area consists of moderately variable topographic configurations with diverse vegetation components.
Idaho Lidar Consortium (ILC): Nez Perce Reservation
공공데이터포털
The lidar survey was conducted by vendor Spencer B. Gross, 13545 NW Science Park dr.,97229, Portland, OR. Lidar instrument Leica ALS40 was flown over the period of 13 and 26 July 2002. The primary goal of the study is to provide operational implementation of Lidar technology in support of project level planning. The proposed applications of Lidar in support of planning are: vegetation structural modeling, erosion modeling, fuels, transportation planning, timber system planning, wildlife habitat modeling, and stream quality. The Rocky Mountain Research Station will provide the development of peer-reviewed forest structural metrics and technical support in implementation of Lidar technology. The technical specifications have been defined to specifically support vegetation modeling using Lidar data. The project area consists of four blocks totaling 24, 729 hectares in Nez Perce Reservation, which is located in central Idaho and is a land of beautiful rivers and steep mountains.The data were delivered in ASCII format with information on easting, northing and elevation for each Lidar pulse. The ascii files were converted to las format and classified using the Multiscale Curvature Classification (MCC) method of Evans and Hudak (2007). Evans, J.S., and A.T. Hudak. (2007) A multiscale curvature algorithm for classifying discrete return lidar in forested environments. IEEE Transactions on Geoscience and Remote Sensing 45(4): 1029-1038.
Idaho Lidar Consortium (ILC): South Fork Salmon and Secesh Rivers
공공데이터포털
These LAS and associated files cover areas of the Payette and Boise National Forests, Idaho, and were collected for and processed by the USDA Forest Service, Moscow, ID in cooperation with Watershed Sciences Inc. of Corvallis Oregon, as a part of a project to use Lidar to study wildfire effects on forest canopy structure and hillslope erosion patterns. Data included with this set include the original .las data tiles, a shapefile delimiting the extent and placement of all of these tiles, another shapefile delimiting the total extent (boundary) of the data , and a vendor's report in PDF format detailing the data collection, processing, and error-checking steps. The data are in LAS 1.0 format with information on return number, easting, northing, elevation, scan angle, number of returns of given pulse, intensity, user data, point source ID, and GPS time.
Idaho Lidar Consortium (ILC): Jack Waite Mine
공공데이터포털
The lidar survey was conducted by vendor Parametrix, a Lidar company. Lidar instrument Optech ALTM-2033 was flown with Cessna 337 over the period of 13 and 24 Oct 2007. The data were delivered in ASCII format with information on Ground Last Return, Extracted Features 1st Return, Extracted Features Last Return, All Shots 1st Return, All Shots Last Return, Model Keypoints. The primary goal of the study is to provide operational implementation of Lidar technology in support of project level planning. The proposed applications of Lidar in support of planning are: vegetation structural modeling, erosion modeling, fuels, transportation planning, timber system planning, wildlife habitat modeling, and stream quality. The Rocky Mountain Research Station will provide the development of peer-reviewed forest structural metrics and technical support in implementation of Lidar technology. The technical specifications have been defined to specifically support vegetation modeling using Lidar data. The project area consists of one contiguous blocks totaling 5741 hectares in Jack Waite Mine, Murray,Idaho. The project area consists of moderately variable topographic configurations with diverse vegetation components.
IML Critical Zone Observatory, Clear Creek Aug 2014 Lidar Survey (532 nm)
공공데이터포털
This dataset was collected using the Optech Aquarius ALTM, a hybrid laser mapping system which collects simultaneous land and shallow water-depth measurements using a beam wavelength of 532 nm. This dataset was collected by NCALM for PI Dr. Praveen Kumar, University of Illinois. Clear Creek is part of the Intensively Managed Landscapes (ILM) Critical Zone Observatory (CZO). The requested survey area consisted of two rectangles - called East and West - enclosing approximately 204 square kilometers along with their associated watercourse corridors. The West rectangle is located 35 km NW of Iowa City, Iowa and the East rectangle is located 10 km NW of the same city. This survey was performed with 2 different LiDAR systems: 1) Optech Gemini Airborne Laser Terrain Mapper (ALTM) (available here) which is an infrared laser mapping sensor and 2) Optech Aquarius ALTM (this dataset) which is a hybrid laser mapping system as it collects simultaneous land and shallow water-depth measurements. It operates in the green spectrum, thus enabling it to penetrate water. These LiDAR mapping systems along with an Optech 12-bit full waveform digitizer were mounted consecutively in a twin-engine Piper PA- 31-350 Navajo Chieftain (Tail Number N154WW). Full waveform files are available via this link.
USBR Upper Columbia River Basin East
공공데이터포털
These Lidar data were collected on October 16 to November 5, 2006 by Watershed Sciences Incorporated for the Puget Sound Lidar Consortium, with funding from the US Bureau of Reclamation. The survey areas cover eastern portions of the Upper Okanogan River in Canada, the Lower Okanogan River in Washington State, and Lake Roosevelt in Washington State. The study areas total ~560 square kilometers. These lidar were acquired for all the areas identified for the purpose of stream channel assessment and potential stream restoration design.