The TROPESS OMI-Aura L2 Ozone for Forward Stream, Standard Product contains the vertical distribution of the retrieved atmospheric state of ozone (O3), formal uncertainties, and diagnostic information measured by the OMI instrument on the EOS Aura satellite. The forward stream standard product is global for the time period from 2021-02-01 to present. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 13 km x 24 km (OMI nadir FOV), and are reported at 26 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.

The Aura Ozone Monitoring Instrument Level-2 Ozone Profile data product OMO3PR (Version 003) is now available from the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) for the public access. OMI Level-2 ozone profile product, OMO3PR at the pixel resolution 13x 48 km (at nadir), is based on the optimal estimation algorithm (Rodgers, 2000) with climatological ozone profiles as a-priori information. The OMO3PR retrieval algorithm uses spectral radiance values from the UV1 channel (270 nm to 308.5 nm) and from the first part of the UV2 channel (311.5 nm to 33 0 nm). OMO3PR product provides ozone values (in Dobson unit) for 18 atmospheric layers. It also provides a-priori ozone profile values, error covariance matrix, averaging kernel and some ancillary information such as time, latitude, longitude, solar zenith and viewing zenith angles and quality flags. The short name for this Level-2 OMI ozone profile product is OMO3PR. The lead scientist for this product is Dr. Johan de Haan.The OMO3PR product files are stored in the version 5 Hierarchical Data Format (HDF-EOS5). Each file contains data from the day lit portion of an orbit (approximately 53 minutes). There are approximately 14 orbits per day thus the total data volume is approximately 150 GB/day.

The TROPESS AIRS-Aqua and OMI-Aura L2 Ozone for Forward Stream, Standard Product contains the vertical distribution of the retrieved atmospheric state of ozone (O3), formal uncertainties, and diagnostic information measured by the AIRS instrument on the EOS Aqua satellite and the OMI instrument on the EOS Aura satellite. The forward stream standard product is global for the time period from 2021-02-01 to present. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 13 km x 24 km (OMI nadir FOV), and are reported at 26 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.

The OMPS-NPP L2 NP Ozone (O3) Total Column swath orbital product provides ozone profile retrievals from the Ozone Mapping and Profiling Suite (OMPS) Nadir-Profiler (NP) instrument on the Suomi-NPP satellite. The V8 ozone profile algorithm relies on nadir profiler measurements made in the 250 to 310 nm range, as well as from measurements from the nadir mapper in the 300 to 380 nm range. Ozone mixing ratios are reported at 15 pressure levels between 50 and 0.5 hPa. Additionally, this data product contains measurements of total ozone, UV aerosol index and reflectivities at 331 and 380 nm.Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-82 to +82 degrees latitude), and there are about 14.5 orbits per day, each has typically 80 profiles. The NP footprint size is 250 km x 250 km. The files are written using the Hierarchical Data Format Version 5 or HDF5.

The OMPS-N21 L2 LP Ozone (O3) Vertical Profile swath daily 3slit collection contains ozone measured by the Ozone Mapping and Profiling Suite (OMPS) Limb-Profiler (LP) sensor on the NOAA-21 satellite. The LP ozone product measures the vertical distribution of ozone in the stratosphere and lower mesosphere. The algorithm derives ozone profile values along with errors in the UV from 29.5 km and 52.5 km, and in the visible from cloud top to 37.5 km (when there are no clouds the lower limit is 12.5 km). Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-90 to 90 degrees latitude), and there are about 14.5 orbits per day, the data from the center of the LP three slits are used to make a vertical profile. The profile is measured from the ground up to about 60 km with a vertical resolution of the retrieved profiles of approximately 1.8 km. The data are written using the Hierarchical Data Format Version 5 or HDF5.

The TROPESS OMI-Aura L2 Ozone for Forward Stream, Summary Product contains the vertical distribution of the retrieved atmospheric state of ozone (O3), and formal uncertainties measured by the OMI instrument on the EOS Aura satellite. The forward stream standard product is global for the time period from 2021-02-01 to present. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 13 km x 24 km (OMI nadir FOV), and are reported at 26 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.