LANDFIRE's 2023 Update (LF 2023) Forest Canopy Cover (CC) describes the percent cover of the tree canopy in a stand. CC is a vertical projection of the tree canopy cover onto an imaginary horizontal plane. In fire behavior models, CC supplies information to determine the probability of crown fire initiation, provides input in the spotting model, and aids in calculating wind reductions and fuel moisture conditioning. To create CC, LANDFIRE's Existing Vegetation Cover (EVC) product must be produced first. EVC is a continuous scaled product which assigns cover to all life forms in the LF data, this product is created using an image-based process (within the Conterminous United States (CONUS)) to assess canopy structure for areas disturbed in the past twenty years. CC is then derived from EVC by assigning bins of 10% for fuel production and use in fire behavior software. CC is used in the calculation of Forest Canopy Bulk Density (CBD) and Base Height (CBH). To designate disturbed areas where CC is modified, the aggregated Annual Disturbance products from 2014 to 2023 in the LF Fuel Disturbance (FDist) product are used. All existing disturbances between 2014-2023 are represented in LF 2023, and the products are intended to be used in 2024 (the year of release). When using any product from the LF 2023 fuel product suite, users should consider adjusting fuel layers for disturbances that occurred after the end of the 2023 fiscal year (after October 1st, 2023). Disturbances that occurred after the end of the 2023 fiscal year are not accounted for within LF 2023 fuel products. Learn more about LF 2023 at https://www.landfire.gov/data/lf2023.

LANDFIRE's 2023 Update (LF 2023) Forest Canopy Cover (CC) describes the percent cover of the tree canopy in a stand. CC is a vertical projection of the tree canopy cover onto an imaginary horizontal plane. In fire behavior models, CC supplies information to determine the probability of crown fire initiation, provides input in the spotting model, and aids in calculating wind reductions and fuel moisture conditioning. To create CC, LANDFIRE's Existing Vegetation Cover (EVC) product must be produced first. EVC is a continuous scaled product which assigns cover to all life forms in the LF data, this product is created using an image-based process (within the Conterminous United States (CONUS)) to assess canopy structure for areas disturbed in the past twenty years. CC is then derived from EVC by assigning bins of 10% for fuel production and use in fire behavior software. CC is used in the calculation of Forest Canopy Bulk Density (CBD) and Base Height (CBH). To designate disturbed areas where CC is modified, the aggregated Annual Disturbance products from 2014 to 2023 in the LF Fuel Disturbance (FDist) product are used. All existing disturbances between 2014-2023 are represented in LF 2023, and the products are intended to be used in 2024 (the year of release). When using any product from the LF 2023 fuel product suite, users should consider adjusting fuel layers for disturbances that occurred after the end of the 2023 fiscal year (after October 1st, 2023). Disturbances that occurred after the end of the 2023 fiscal year are not accounted for within LF 2023 fuel products. Learn more about LF 2023 at https://www.landfire.gov/data/lf2023.

LANDFIRE's (LF) 2022 Forest Canopy Height (CH) describes the average height of the top of the canopy for a stand. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). CH supplies information for fire behavior models, such as FARSITE (Finney 1998), that can determine the starting point of embers in the spotting model, wind reductions, and the volume of crown fuels. To create this product, plot level CH values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance Canopy Cover and CH are used as predictors of disturbed CH using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and time since disturbance. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). In LF 2022, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last ten years. To designate disturbed areas where CH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The "capable" year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php

LANDFIRE's (LF) 2022 Forest Canopy Height (CH) describes the average height of the top of the canopy for a stand. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). CH supplies information for fire behavior models, such as FARSITE (Finney 1998), that can determine the starting point of embers in the spotting model, wind reductions, and the volume of crown fuels. To create this product, plot level CH values are calculated using the canopy fuel estimation software, Forest Vegetation Simulator (FVS). Pre-disturbance Canopy Cover and CH are used as predictors of disturbed CH using a linear regression equation per Fuel Vegetation Type (FVT), disturbance type/severity, and time since disturbance. CH is used in the calculation of Canopy Bulk Density (CBD) and Canopy Base Height (CBH). In LF 2022, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last ten years. To designate disturbed areas where CH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The "capable" year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php

LANDFIRE's 2023 Update (LF 2023) Forest Canopy Height (CH) describes the average height of the top of the canopy for a stand. CH is used in the calculation of Forest Canopy Bulk Density (CBD) and Base Height (CBH). CH supplies information for fire behavior models, such as FARSITE (Finney 1998), that can determine the starting point of embers in the spotting model, wind reductions, and the volume of crown fuels. To create CH, LANDFIRE's Existing Vegetation Height (EVH) product must be produced first. EVH is a continuous scaled product which assigns height to all life forms in the LF data, this product is created using an image-based process (within the Conterminous United States (CONUS)) to assess canopy structure for areas disturbed in the past twenty years. CH is then derived from EVH by assigning bins of 13 height classes for fuel production and use in fire behavior software. In LF 2023, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last twenty years. To designate disturbed areas where CH is modified, the aggregated Annual Disturbance products from 2014 to 2023 in the LF Fuel Disturbance (FDist) product are used. All existing disturbances between 2014-2023 are represented in LF 2023, and the products are intended to be used in 2024 (the year of release). When using any product from the LF 2023 fuel product suite, users should consider adjusting fuel layers for disturbances that occurred after the end of the 2023 fiscal year (after October 1st, 2023). Disturbances that occurred after the end of the 2023 fiscal year are not accounted for within LF 2023 fuel products. Learn more about LF 2023 at https://www.landfire.gov/data/lf2023.

LANDFIRE's 2023 Update (LF 2023) Forest Canopy Height (CH) describes the average height of the top of the canopy for a stand. CH is used in the calculation of Forest Canopy Bulk Density (CBD) and Base Height (CBH). CH supplies information for fire behavior models, such as FARSITE (Finney 1998), that can determine the starting point of embers in the spotting model, wind reductions, and the volume of crown fuels. To create CH, LANDFIRE's Existing Vegetation Height (EVH) product must be produced first. EVH is a continuous scaled product which assigns height to all life forms in the LF data, this product is created using an image-based process (within the Conterminous United States (CONUS)) to assess canopy structure for areas disturbed in the past twenty years. CH is then derived from EVH by assigning bins of 13 height classes for fuel production and use in fire behavior software. In LF 2023, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last twenty years. To designate disturbed areas where CH is modified, the aggregated Annual Disturbance products from 2014 to 2023 in the LF Fuel Disturbance (FDist) product are used. All existing disturbances between 2014-2023 are represented in LF 2023, and the products are intended to be used in 2024 (the year of release). When using any product from the LF 2023 fuel product suite, users should consider adjusting fuel layers for disturbances that occurred after the end of the 2023 fiscal year (after October 1st, 2023). Disturbances that occurred after the end of the 2023 fiscal year are not accounted for within LF 2023 fuel products. Learn more about LF 2023 at https://www.landfire.gov/data/lf2023.

The LANDFIRE fuel data describe the composition and characteristics of both surface fuel and canopy fuel. Specific products include fire behavior fuel models, canopy bulk density (CBD), canopy base height (CBH), canopy cover (CC), canopy height (CH), and fuel loading models (FLMs). These data may be implemented within models to predict the behavior and effects of wildland fire. These data are useful for strategic fuel treatment prioritization and tactical assessment of fire behavior and effects. CC describes percent cover of tree canopy in a stand. A spatially-explicit map of canopy cover supplies information for fire behavior models such as FARSITE (Finney 1998) to determine surface fuel shading for calculating dead fuel moisture and for calculating wind reductions. In FARSITE, canopy characteristics are used to compute shading, wind reduction factors, spotting distances, crown fuel volume, spread characteristics of crown fires and incorporate the effects of ladder fuels for transitions from a surface to crown fire.

The LANDFIRE fuel data describe the composition and characteristics of both surface fuel and canopy fuel. Specific products include fire behavior fuel models, canopy bulk density (CBD), canopy base height (CBH), canopy cover (CC), canopy height (CH), and fuel loading models (FLMs). These data may be implemented within models to predict the behavior and effects of wildland fire. These data are useful for strategic fuel treatment prioritization and tactical assessment of fire behavior and effects. CC describes percent cover of tree canopy in a stand. A spatially-explicit map of canopy cover supplies information for fire behavior models such as FARSITE (Finney 1998) to determine surface fuel shading for calculating dead fuel moisture and for calculating wind reductions. In FARSITE, canopy characteristics are used to compute shading, wind reduction factors, spotting distances, crown fuel volume, spread characteristics of crown fires and incorporate the effects of ladder fuels for transitions from a surface to crown fire.

The LANDFIRE fuel data describe the composition and characteristics of both surface fuel and canopy fuel. Specific products include fire behavior fuel models, canopy bulk density (CBD), canopy base height (CBH), canopy cover (CC), canopy height (CH), and fuel loading models (FLMs). These data may be implemented within models to predict the behavior and effects of wildland fire. These data are useful for strategic fuel treatment prioritization and tactical assessment of fire behavior and effects. CC describes percent cover of tree canopy in a stand. A spatially-explicit map of canopy cover supplies information for fire behavior models such as FARSITE (Finney 1998) to determine surface fuel shading for calculating dead fuel moisture and for calculating wind reductions. In FARSITE, canopy characteristics are used to compute shading, wind reduction factors, spotting distances, crown fuel volume, spread characteristics of crown fires and incorporate the effects of ladder fuels for transitions from a surface to crown fire.

LANDFIRE's (LF) 2022 Canopy Bulk Density (CBD) describes the mass of available canopy fuel per unit canopy volume that would burn in a crown fire. A spatially explicit map of CBD supplies information used in fire behavior models to determine the spread characteristics of active crown fires across the landscape. CBD for disturbed and non-disturbed areas is determined via a general linear model (GLM) relating Canopy Height (CH) and Canopy Cover (CC) to CBD (Reeves et al 2009). In LF 2022, fuel products are created with LF 2016 Remap vegetation in areas that were un-disturbed in the last ten years. To designate disturbed areas where CBD is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The "capable" year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php