LANDFIRE (LF) 2022 Fuel Vegetation Height (FVH) represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance. Fuel products in LF 2022 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The “capable” year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php .

LANDFIRE (LF) 2022 Fuel Vegetation Height (FVH) represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance. Fuel products in LF 2022 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The “capable” year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php .

LANDFIRE's 2023 Update (LF 2023) Fuel Vegetation Height (FVH) product represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. In LF 2023, vegetation products are created through an image-based process (within the Conterminous United States (CONUS)) that assesses canopy structure (Forest Canopy Height (CH) and Cover (CC)). EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance and fuel products in LF 2023 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2014 to 2023 in the LF Fuel Disturbance (FDist) product are used. All existing disturbances between 2014-2023 are represented in LF 2023, and the products are intended to be used in 2024 (the year of release). When using any product from the LF 2023 fuel product suite, users should consider adjusting fuel layers for disturbances that occurred after the end of the 2023 fiscal year (after October 1st, 2023). Disturbances that occurred after the end of the 2023 fiscal year are not accounted for within LF 2023 fuel products. Learn more about LF 2023 at https://landfire.gov/data/lf2023.

LANDFIRE's 2023 Update (LF 2023) Fuel Vegetation Height (FVH) product represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. In LF 2023, vegetation products are created through an image-based process (within the Conterminous United States (CONUS)) that assesses canopy structure (Forest Canopy Height (CH) and Cover (CC)). EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance and fuel products in LF 2023 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2014 to 2023 in the LF Fuel Disturbance (FDist) product are used. All existing disturbances between 2014-2023 are represented in LF 2023, and the products are intended to be used in 2024 (the year of release). When using any product from the LF 2023 fuel product suite, users should consider adjusting fuel layers for disturbances that occurred after the end of the 2023 fiscal year (after October 1st, 2023). Disturbances that occurred after the end of the 2023 fiscal year are not accounted for within LF 2023 fuel products. Learn more about LF 2023 at https://landfire.gov/data/lf2023.

The LANDFIRE (LF) 2016 Remap Fuel Vegetation Height (FVH) represents a modified pre-disturbance version of the Existing Vegetation Height (EVH) product from previous LF versions. LF Remap EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range from 0m to 50m or more. To translate continuous EVH values into fuel model assignments, EVH values are binned to new groups to improve canopy fuel predictions. FVH leverages fuel transition assignments related to disturbed areas by re-establishing pre-disturbance vegetation and was developed using the full suite of LF vegetation releases and the most recent 10 years of disturbance data. FVH is a capable fuels product that calculates Time Since Disturbance (TSD) assignments for disturbed areas using an "effective year." For example, year 2020 fuels may be calculated for the year 2020. This new process considers all the existing disturbances included in LF Remap and adjusts the TSD for these to the effective year (2020 in this example), making the products "2020 capable fuels." More information about capable fuels can be found at https://www.landfire.gov/lf_remap.php.

The LANDFIRE (LF) 2016 Remap Fuel Vegetation Height (FVH) represents a modified pre-disturbance version of the Existing Vegetation Height (EVH) product from previous LF versions. LF Remap EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range from 0m to 50m or more. To translate continuous EVH values into fuel model assignments, EVH values are binned to new groups to improve canopy fuel predictions. FVH leverages fuel transition assignments related to disturbed areas by re-establishing pre-disturbance vegetation and was developed using the full suite of LF vegetation releases and the most recent 10 years of disturbance data. FVH is a capable fuels product that calculates Time Since Disturbance (TSD) assignments for disturbed areas using an "effective year." For example, year 2020 fuels may be calculated for the year 2020. This new process considers all the existing disturbances included in LF Remap and adjusts the TSD for these to the effective year (2020 in this example), making the products "2020 capable fuels." More information about capable fuels can be found at https://www.landfire.gov/lf_remap.php.

LANDFIRE (LF) 2022 Fuel Vegetation Height (FVH) represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance. Fuel products in LF 2022 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The "capable" year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php

LANDFIRE (LF) 2022 Fuel Vegetation Height (FVH) represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance. Fuel products in LF 2022 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2013 to 2022 in the Fuel Disturbance (FDist) product are used. All existing disturbances between 2013-2022 are represented in the LF 2022 update, and the products are intended to be used in 2023 (the year of release). The "capable" year terminology used in LF 2020 and LF 2016 Remap is no longer specified, due to reduction in latency from when a disturbance occurs to the release date of fuel products accounting for that disturbance. However, users should still consider adjusting fuel layers for disturbances that occurred after the end of the 2022 fiscal year (after October 1st, 2022) when using the LF 2022 fuel products. Because those changes would not be accounted for. Learn more about LF 2022 at https://landfire.gov/lf_230.php

LANDFIRE's (LF) 2022 update (LF 2022) Existing Vegetation Height (EVH) represents the average height of the dominant vegetation for a 30-m cell. EVH is produced separately for tree, shrub, and herbaceous lifeforms using training data depicting the weighted average height by species cover and Existing Vegetation Type (EVT) lifeform. Decision tree models using field reference data, lidar, and Landsat are developed separately for each lifeform, then lifeform specific height class layers are merged along with land cover into a single EVH product based on the dominant lifeform of each pixel. EVH ranges are continuous for the herbaceous lifeform category ranging from 0.1 to 1 meter with decimeter increments, 0.1 to 3 meters for shrub lifeform, and 1 to 99 meters for tree lifeform. If the height values of each lifeform exceed the continuous value range, they are binned into the appropriate maximum height class. EVH is then reconciled through QA/QC measures to ensure lifeform is synchronized with Existing Vegetation Cover (EVC). Urban and developed areas are derived from the National Land Cover Database (NLCD), and the latest available Microsoft Building Footprint dataset. Agricultural lands originate from the 2022 Cropland Data Layer (CDL) and the 2019 California Statewide Crop Mapping layer. Disturbance events after 2016 are accounted for by incorporating transition rulesets using LF 2022 Fuel Disturbance (FDist). LF uses EVH as an input for LF 2022 Fuel Vegetation Height (FVH).

LANDFIRE’s 2023 Update (LF 2023) Fuel Vegetation Height (FVH) product represents the LF Existing Vegetation Height (EVH) product, modified to represent pre-disturbance EVH in areas where disturbances have occurred over the past 10 years. In LF 2023, vegetation products are created through an image-based process (within the Conterminous United States (CONUS)) that assesses canopy structure (Forest Canopy Height (CH) and Cover (CC)). EVH is mapped as continuous estimates of canopy height for tree, shrub, and herbaceous lifeforms with a potential range of 0-100m. Continuous EVH values are binned to align with fuel model assignments when creating FVH. FVH is an input for fuel transitions related to disturbance and fuel products in LF 2023 were created with LF 2016 Remap vegetation in non-disturbed areas. To designate disturbed areas where FVH is modified, the aggregated Annual Disturbance products from 2014 to 2023 in the LF Fuel Disturbance (FDist) product are used. All existing disturbances between 2014-2023 are represented in LF 2023, and the products are intended to be used in 2024 (the year of release). When using any product from the LF 2023 fuel product suite, users should consider adjusting fuel layers for disturbances that occurred after the end of the 2023 fiscal year (after October 1st, 2023). Disturbances that occurred after the end of the 2023 fiscal year are not accounted for within LF 2023 fuel products. Learn more about LF 2023 at https://www.landfire.gov/data/lf2023.