**Overview** These profiling lidar datasets collect profiles of wind speed and wind direction from nominally 40 m above the surface to 220 m above the surface, depending on visibility. **Data Quality** Only data points with CNR -22 dB are included in these 2-min averaged files.

**Overview** The available "readme" file introduces the basics of the Doppler lidar data and offers a detailed description of the variables present in the data files. For those with any further questions about the data and its interpretation, contact either Alan Brewer () or Sunil Baidar (). It is highly recommended to discuss any planned use of the data with National Oceanic and Atmospheric Administration-Chemical Sciences Division (NOAA-CSD) scientists. For more information, refer to the Readme file: "noaa-esrl-arlingtonlidar-readme-1.pdf." **Data Quality** Refer to the attached "noaa-esrl-arlingtonlidar-readme-1.pdf" Readme file. **Uncertainty** Refer to the attached "noaa-esrl-arlingtonlidar-readme-1.pdf" Readme file. **Constraints** Refer to the attached "noaa-esrl-arlingtonlidar-readme-1.pdf" Readme file.

**Overview** Scaled Wind Farm Technology (SWiFT) Facility meteorological tower (MET), turbine, and Technical University of Denmark (DTU) SpinnerLidar data acquired on 20161216 UTC during a neutral atmospheric boundary layer inflow at a single focus distance of 2.5 D (D=27 m). **Data Quality** Data information is provided in uploaded documentation: *SWiFT Wake Steering Instrumentation and Data Processing* (PDF).

**Overview** These profiling lidar datasets collect profiles of wind speed and wind direction from nominally 40 m above the surface to 220 m above the surface, depending on visibility. **Data Quality** Only data points with CNR -22 dB are included in these 2-min averaged files.

**Overview** The dataset includes 15-minute average wind speed and direction records from 10 m to 250 m above ground level (AGL) in 5-m range gates. Data were collected by a Scintec SFAS wind profiler installed at the Condon State Airport in Oregon, about 1.8 km northeast of the center of Condon, Ore., and are intended for validating WFIP2 model improvements. **Data Details** Instrument location: * N 45° 14’ 41.58” (N 45.244885) * W 120° 10’ 06.58” (W 120.168495) Instrument clock and computer system time set to UTC. **Data Quality** The Scintec SFAS wind profiler instrument installed at the Decker Ranch is capable of measuring at heights up to 500 m. For this study, the maximum height was set to 250 m. The instrument was oriented to true north, so no corrections to the wind direction should be made. Scintec wind profilers come with the APRun software package, which performs data collection and quality control (QC), among other functions. Version 1.46 of APRun was used in this study. The APRun manual states: *The primary results are checked against local signal quality criteria, combined signal quality criteria and two-dimensional spatial/temporal consistency tests. Any data that does not pass all quality control tests is devalidated and removed*. Devalidation means replacing the value with an error value, usually a series of ‘9’s, such as 99.99 or 999.99. Not all devalidated data are actually removed from the *.mnd files, so the user must filter them out. There are some error flags that indicate the type of error, but these are not included in the *.mnd files, and we have no access to them. Because QC already has been performed by APRun, our QC procedures consisted of removing samples with error values and performing a visual inspection of the data to see if larger patterns indicated any kind of problem. There are 515 gaps of two hours or less and 26 gaps of more than two hours. The longest gaps are: * 47.78 days, from 2016-03-16 18:00Z to 2016-05-03 12:45Z * 40.20 days, from 2016-06-04 13:15Z to 2016-07-14 18:00Z All gaps that exceed two hours are listed in file: Condon_gaps.txt.

**Overview** Scaled Wind Farm Technology (SWiFT) Facility meteorological tower (MET), turbine, and Technical University of Denmark (DTU) SpinnerLidar data acquired on 20161216 UTC during a neutral atmospheric boundary layer inflow at a single focus distance of 2.5 D (D=27 m). **Data Quality** Data information is provided in uploaded documentation: *SWiFT Wake Steering Instrumentation and Data Processing* (PDF).

**Overview** Deployment off the coast of Humboldt, California **Data Details** Windcube Data Files: lidar.z05.00.20200929.000000.gyro.7z lidar.z05.00.20200929.000000.rtd.7z lidar.z05.00.20200929.000000.sta.7z lidar.z05.00.20200929.000000.stdrtd.7z lidar.z05.00.20200929.000000.stdsta.7z The Windcube data is compressed via 7-zip: "sta" files are 10 minute averaged data. "rtd" files are ~1 second data. "gyro" files are buoy movement data. 7z is the new archive format, providing high compression ratio. The main features of 7z format: Open architecture High compression ratio Strong AES-256 encryption Ability of using any compression, conversion or encryption method Supporting files with sizes up to 16000000000 GB Unicode file names Solid compressing Archive headers compressing 7z has open architecture, so it can support any new compression methods. https://www.7-zip.org/7z.html **Data Quality** Additional meta data to follow

**Data Details** UMBC Lidar: Water Tank: lat(40.041) lon(-105) alt(1602) 20150410-20150416 NW Pad: lat(40.051) lon(-105) alt(1578) 20150416-20150428 Visitor's Center: lat(40.045) lon(-105) alt(1587) 20150428 - 20150502

**Overview** fixed scan against southeast sonic of 50m, 100m and 150m and supersite at 60m height **Data Quality** unfiltered data **Uncertainty** raw data **Constraints**