**Overview** Monitor real-time profiles of virtual temperature (C), wind speed (ms-1), and direction (deg) few km above ground level. **Data Details** Raw files contain radial velocity (ms-1), signal-to-noise ratio (dB), signal power (dB), spectral width (ms-1), and noise amplitude (dB). "W" files contain hourly profiles of wind speed (ms-1) and direction (deg). "T" files contain hourly profiles of virtual temperature (C).

**Overview** Raw data captured from the NOAA ESRL website: https://www.esrl.noaa.gov/psd/data/obs/data/ Hourly Radar Winds (WwWind) and Temperature (WwTemp)

**Overview** Raw data captured from the NOAA ESRL website: https://www.esrl.noaa.gov/psd/data/obs/data/ Hourly Radar Winds (WwWind) and Temperature (WwTemp)

**Overview** Raw data captured from the NOAA ESRL website: https://www.esrl.noaa.gov/psd/data/obs/data/ Hourly Radar Winds (WwWind) and Temperature (WwTemp)

**Overview** Raw data captured from the NOAA ESRL website: https://www.esrl.noaa.gov/psd/data/obs/data/ Hourly Radar Winds (WwWind) and Temperature (WwTemp)

**Overview** **Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz. **Data Details** Spectra data are stored in two daily files, a header (file names contain "H") and a data (file names contain "D") file. The (H)eader files are made up of binary data records containing information about the operational parameters of the profiler, while (D)ata files, also composed of binary data records, contain the spectra data collected by the profiler, i.e. spectral values for each spectral bin for every range gate. **Data Quality** Various quality control (QC) algorithms developed over the years process data in real time on the radar software layer. These algorithms, which run in real time, act on time-series, spectra, moment, and consensus data layers that are persisted in various forms. For a detailed description, refer to the attached QC document: *915 and 449 MHz Radar Wind Profilers and RASS QC*. **Uncertainty** The uncertainty is defined by the spacing of the spectral bin.

**Overview** **Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz. **Data Details** Spectra data are stored in two daily files, a header (file names contain "H") and a data (file names contain "D") file. The (H)eader files are made up of binary data records containing information about the operational parameters of the profiler, while (D)ata files, also composed of binary data records, contain the spectra data collected by the profiler, i.e. spectral values for each spectral bin for every range gate. **Data Quality** Various quality control (QC) algorithms developed over the years process data in real time on the radar software layer. These algorithms, which run in real time, act on time-series, spectra, moment, and consensus data layers that are persisted in various forms. For a detailed description, refer to the attached QC document: *915 and 449 MHz Radar Wind Profilers and RASS QC*. **Uncertainty** The uncertainty is defined by the spacing of the spectral bin.

**Overview** **Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz. **Data Quality** Various quality control (QC) algorithms developed over the years process data in real time on the radar software layer. These algorithms, which run in real time, act on time-series, spectra, moment, and consensus data layers that are persisted in various forms. For a detailed description, refer to the attached QC document: *915 and 449 MHz Radar Wind Profilers and RASS QC*.

,The Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) 915 MHz Radar Wind Profiler and RASS Data Set is one of the various boundary layer data sets developed for the SGP97 project. This data set contains hourly average profiles of wind speed and direction, u and v wind components (from the Radar Wind Profiler), and virtual temperature (from the RASS [Radio Acoustic Sounding System]). The wind profiles have a vertical resolution of ~60 meters (m) in the low mode and ~200 m in the high mode. The RASS has a vertical resolution of ~100 m. The site is located at the DOE ARM SGP Central Facility near Lamont, Oklahoma. The SGP97 domain is approximately 97W to 99W longitude and 34.5N to 37N latitude. The radar wind profiler/RASS (RWP) measures wind profiles from (nominally) .1 km to 5 km and virtual temperature profiles from .1 km to 1.5 km. It operates by transmitting electromagnetic energy into the atmosphere and measuring the strength and frequency of backscattered energy. Virtual temperatures are recovered by transmitting an acoustic signal vertically and measuring the electromagnetic energy scattered from the acoustic wavefront. The propagation speed of the acoustic wave is proportional to the square root of the virtual temperature. The primary quantities measured with the system are the intensity and Doppler frequency of backscattered radiation. The wind speed is determined from the Doppler frequency of energy scattered from refractive index fluctuations (caused primarily by moisture fluctuations but also by temperature fluctuations) embedded within the atmosphere; the virtual temperature is determined from the Doppler frequency of microwave energy scattered from acoustic energy propagating through the atmosphere. No flags are applied during data ingest of the consensus averaged winds and virtual temperatures. However, a parallel data stream with the ".b2" name field has data flags applied that look at relative values of temps or wind components. Neighboring values in space (height) and time (sequential profiles) are compared with predefined limits (given in the metadata of the NETCDF file). In addition to the unchanged wind component and temperature fields, a field of flags (on or off [1 or 0]) is supplied to "point" at suspect values. These data are in their original NetCDF format. No additional quality control was performed by the University Corporation for Atmospheric Research/Joint Office for Science Support (UCAR/JOSS).,

**Overview** **Winds.** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and are combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature.** To measure atmospheric temperature, a radio acoustic sounding system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60 m up to 3.5 km for the 449 MHz. **Moments and Spectra.** The raw spectra and moments data are available for all dwells along each beam and are stored in daily files. For each day, there are files labeled "header" and "data." These files are generated by the radar data acquisition system (LAP-XM) and are encoded in a proprietary binary format. Values of spectral density at each Doppler velocity (FFT point), as well as the radial velocity, signal-to-noise ratio, and spectra width for the selected signal peak are included in these files. Attached zip files, *449mhz-spectra-data-extraction.zip* and *449mhz-moment-data-extraction.zip*, include executables to unpack the spectra, (GetSpectra32.exe) and moments (GetMomSp32.exe), respectively. Documentation on usage and output file formats also are included in the zip files. **Data Details** Note, the b0 data is identical to 00 data but a netcdf extraction of the b0 data was also created for the duration of the WFIP2 campaign. **Data Quality** Various quality control (QC) algorithms developed over the years process data in real time on the radar software layer. These algorithms, which run in real time, act on time-series, spectra, moment, and consensus data layers that are persisted in different forms.