The Surface Reflectance Measured with a Helicopter-borne MMR Data Set contains surface reflectance measurements in Landsat-TM bands at low to intermediate altitudes. The helicopter operated during all Intensive Field Campaigns (IFCs) and was available to support all satellite overpasses. The average flight time was 2 hours, during which an average of 11 FIFE sites plus one special target were covered. The helicopter missions were designed to provide a rapid means of intensively spectrally characterizing each FIFE site while providing FIFE study area coverage, and to provide an intermediate scale of sampling between that of the surface measurements and the higher altitude aircraft and spacecraft multispectral imaging devices. The Modular Multiband Radiometer (MMR) instrumentation was chosen to provide compatibility with surface-based radiometers and TM spacecraft sensors. Off-nadir measurements were made as a means of providing more accurate estimates of hemispherical reflectance and for use with bi-directional reflectance models.

Reflected radiance and reflectance values from Barnes MMR on ground

Contains site averaged reflected radiance and reflectance values from barnes MMR taken from helicopter.

Surface reflectance factors, radiances, and temperatures were measured with a Mast-borne Modular Multiband Radiometer (MMR), predominantly in the solar principal plane, with nadir and off-nadir, view-zenith angles. The MMR was mounted on a portable mast in order to achieve a spatial sampling at a variety of sites as well as within each site. The portable mast alignment varied from the solar principal plane, to the azimuthal plane aligned perpendicular to the principal plane and aligned with the satellite azimuthal plane. Measurements were periodically collected with the MMR over a barium sulfate reference panel. Measurements were typically coordinated with aircraft and/or satellite overpasses. Solar radiation data at or near the specific site should be used to screen possible times of variable cloud cover.

SE-590 reflectance factors and radiances measured from a helicopter

Temperature data from Everest IR thermometer mounted on the helicopter

Spectral reflected radiances measured with Russian GEMMA spectrometer from a helicopter

Site specifice radiance, exoatmospheric reflectance & surface reflectance

The Surface Radiant Temperature Measured with a Helicopter-borne Infrared Thermometer Data Set were collected for six days during July and August of 1989 to provide the radiant temperature of the FIFE sites and as a check of the thermal band on the MMR. The average and standard deviation of radiant temperature were measured with an Everest infrared thermometer. The Everest Series 4000 Infrared Thermometer (IRT) was mounted on the NASA Bell UH-1B helicopter in conjunction with the Barnes Multiband Modular Radiometer (MMR) and the Spectron Engineering SE590 Spectroradiometer for the 1989 field campaign. The IRT collected radiant temperature data as the helicopter hovered over individual sites within the FIFE study area.

Contains helicopter SE-590 measurements taken by RSS-03.