The MODIS/Terra Atmosphere Aeronet Subsetting Product (MODARNSS) consists of MODIS Atmosphere and Ancillary Products subsets that are generated over a number of Aerosol Robotic Network (AERONET) sites. These sites comprise of sites of automatic tracking Sun photometers/sky radiometers located all over the world. The process of generating cutouts involves locating and identifying a subset of sites taken from a global AERONET that are within the spatial coverage of a 5 minute Level 2 MODIS granule and extracting 0.5 x 0.5 degree cutouts. The MODARNSS data set consists of subsets for around 180 AERONET sites around the globe. There is one file per site with 55 Science Data Sets (SDS) such as at-aperture radiances for 36 discrete MODIS bands, Cloud Mask, and Water Vapor, etc.

The MODIS/Terra Atmosphere FluxNet Subsetting Product (MODFNSS) consists of MODIS Atmosphere and Ancillary Products subsets that are generated over a global network of micrometeorological flux measurement (FLUXNET) sites. The process of generating cutouts for these sites involves locating and identifying a subset of sites taken from a global FLUXNET that are within the spatial coverage of a 5 minute Level 2 MODIS granule and extracting 0.5 x 0.5 degree cutouts. The MODFNSS data set consists of subsets for around 400 sites out of the total flux tower sites around the globe. There is one file per site with around 55 Science Data Sets (SDS) such as at-aperture radiances for 36 discrete MODIS bands, Cloud Mask, and Water Vapor, etc.

The MODIS/Aqua Atmosphere BELMANIP subsetting Product (MYDBMSS) consists of MODIS Atmosphere and Ancillary Products subsets that are generated over the Bench-mark Land Multisite Analysis and Intercomparison of Products (BELMANIP) sites. The BELMANIP sites is a network of sites, distributed globally and consist of existing networks such as Earth Observing System (EOS) Core Sites, Bigfoot, Validation of Land European Remote sensing Instruments (VALERI), a global network of micrometeorological flux measurement (FLUXNET), the aerosol robotic network (AERONET) and a set of additional sites.The process of generating cutouts for these sites involves locating and identifying a subset of sites taken from global BELMANIP sites that are within the spatial coverage of a 5 minute Level 2 MODIS granule and extracting 0.5 x 0.5 degree cutouts. The MODBMSS data set consists of subsets for approximately 445 sites around the globe. There is one file per site with 55 Science Data Sets (SDS) such as at-aperture radiances for 36 discrete MODIS bands, Cloud Mask, and Water Vapor, etc.

The MODIS/Terra Atmosphere BELMANIP subsetting Product (MODBMSS) consists of MODIS Atmosphere and Ancillary Products subsets that are generated over the Bench-mark Land Multisite Analysis and Intercomparison of Products (BELMANIP) sites. The BELMANIP sites is a network of sites, distributed globally and consist of existing networks such as Earth Observing System (EOS) Core Sites, Bigfoot, Validation of Land European Remote sensing Instruments (VALERI), a global network of micrometeorological flux measurement (FLUXNET), the aerosol robotic network (AERONET) and a set of additional sites.The process of generating cutouts for these sites involves locating and identifying a subset of sites taken from global BELMANIP sites that are within the spatial coverage of a 5 minute Level 2 MODIS granule and extracting 0.5 x 0.5 degree cutouts. The MODBMSS data set consists of subsets for approximately 445 sites around the globe. There is one file per site with 55 Science Data Sets (SDS) such as at-aperture radiances for 36 discrete MODIS bands, Cloud Mask, and Water Vapor, etc.

The MODIS/Aqua Raw Radiances in Counts 5-Min L1A Swath product (MYD01) contains reformatted and packaged raw instrument data. MODIS instrument data, in packetized form, is reversibly transformed to a computer data structure, along with formatted engineering and spacecraft ancillary data. The Level-1A data is separated into granules for passage to the geolocation and calibration processes. Quality indicators are added to the data to indicate missing pixels and instrument modes. This product contains MODIS digitized raw detector counts data for all 36 MODIS spectral bands, at 250 m, 500 m, or 1 km spatial resolutions including all time tags, all detector views (Earth, solar diffuser, Spectro-Radiometeric Calibration Assembly (SRCA), black body, and space view), and all engineering and ancillary data. Quality indicators are added to the data to indicate missing or bad pixels and instrument modes. Only bands 20 to 36 are used to collect measurements in night mode, while all bands are used in day mode. Visible, short-wave infrared (SWIR), and near infrared (NIR) measurements are made during daytime only, while radiances for thermal infrared (TIR) are measured during both day and night portions of the orbit. Data set information: MODIS Homepage https://modis.gsfc.nasa.gov/data/dataprod/ and MODIS Characterization Support Team https://mcst.gsfc.nasa.gov/

This Near Real Time (NRT) data type (MYD02SSH) is a subsample from the MODIS Level 1B 1-km data. Every fifth pixel is taken from the MYD021KM product and written out to MYD02SSH. The subsampling starts at the third frame, and at the third line. Here, "frame" and "line" are naming conventions for pixels along and across the scan, respectively. Since MYD02SSH is a subsampled Level 1B , many things from the Level 1B documentation apply as well. That is, the MYD02SSH data productcontains calibrated and geolocated at-aperture radiances for 36 bands generated from MODIS Level 1A scans of raw radiance (MOD 01). The radiance units are in W/(m ^2 um sr). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared (SWIR), and Near Infrared (NIR) measurements are made during daytime only, while radiances for Thermal Infrared (TIR) are measured continuously.As it's parent, the MYD02SSH is in HDF-EOS format, and all metadata structures and names are preserved for better convenience. However, some relevant changes are made where appropriate, e.g. the dimension mappings are updated to reflect the new one-to-one correspondance between the data and geolocations. The latter is one of the most important differences: in the MYD02SSH, there is no offset between data and geolocation pixels. The spatial coverage is almost similar to that from MYD021KM (nominally it is 2330 by 2030 km, cross-track by along-track, respectively). The MYD02SSH is produced continuously, and thus the processing provides 2-day repeat observations of the Earth with a repeat orbitpattern every 16 days.The shortname for this product is MYD02SSH

The MODIS/Aqua Aerosol, Cloud and Water Vapor Subset 5-Min L2 Swath 5km and 10km (MYDATML2) product contains a combination of key high interest science parameters. The ATML2 product provides a subset of datasets from the suite of atmosphere team products on both a 10 km scale (aerosols) and 5km scale (native 5 km cloud properties and a 5x5 pixel sample of the 1km cloud datasets). The ATML2 product employs the same 5x5 pixel sampling scheme for the 1km native resolution Level 2 products as is used in the MOD08 Level 3 global aggregated product, an approach that has been shown to retain statistical integrity for multi-day aggregations. The C6 significantly increases the number of datasets included in the ATML2 product, including the full suite of QA datasets. Since the ATML2 data granule file size is significantly smaller than the combined size of the individual L2 products, and because the 1 km pixel sampling is consistent with the L3 algorithm, the ATML2 product is a more practical means for the user community to develop research L3 algorithms for their own specific purposes. For more information, visit the MODIS Atmosphere website at: https://modis-atmos.gsfc.nasa.gov/products/joint-atm

This is MODIS Level-1A Near Real Time (NRT) product containing reformatted and packaged raw instrument data. MODIS instrument data, in packetized form, is reversibly transformed to a computer data structure, along with formatted engineering and spacecraft ancillary data. The Level-1A data is separated into granules for passage to the geolocation and calibration processes. Quality indicators are added to the data to indicate missing pixels and instrument modes. This product contains MODIS digitized raw detector counts data for all 36 MODIS spectral bands, at 250 m, 500 m, or 1 km spatial resolutions including all time tags, all detector views (Earth, solar diffuser, Spectro-Radiometeric Calibration Assembly (SRCA), black body, and space view), and all engineering and ancillary data. Quality indicators are added to to the data to indicate missing or bad pixels and instrument modes. Only bands 20 to 36 are used to collect measurements in night mode, while all bands are used in day mode. Visible, SWIR, and NIR measurements are made during daytime only, while radiances for TIR are measured during both day and night portions of the orbit.

MODIS/Aqua Near Real Time (NRT) L0 PDS Data 5-Min Swath.

This is the wide-swath MODIS/Aqua subset along CloudSat field of view track. The goal of the wide-swath subset is to select and return MODIS data that are within +-100 km across the CloudSat track. I.e. the resultant MODIS subset swath is about 200 km cross-track. Thus, MAC021S1 cross-track width is 201 pixels for radiances. Geolocations in the original product, however, are subsampled at 5-km, and thus the cross-track width of the subset geolocations is 41 pixels. Along-track, all MODIS pixels from the original product are preserved. In the standard product, the MODIS Level 1B data set contains calibrated and geolocated at-aperture radiances for 36 discrete bands located in the 0.4 to 14.4 micron region of electromagentic spectrum. These data are generated from the MODIS Level 1A scans of raw radiance and in the process converted to geophysical units of W/(m^2 um sr). In addition, the Earth Bi-directional Reflectance Distribution Function (BRDF) may be determined for the solar reflective bands (1-19, 26) through knowledge of the solar irradiance (e.g., determined from MODIS solar diffuser data, and from the target illumination geometry). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared, and near infrared measurements are only made during the daytime, while radiances for the thermal infrared region (bands 20-25, 27-36) are measured continuously. (The shortname for this product is MAC021S1).