This Near Real Time (NRT) data type (MOD02SSH) is a subsample from the MODIS Level 1B 1-km data. Every fifth pixel is taken from the MOD021KM product and written out to MOD02SSH. The subsampling starts at the third frame, and at the third line. Here, "frame" and "line" are naming conventions for pixels along and across the scan, respectively. Since MOD02SSH is a subsampled Level 1B , many things from the Level 1B documentation apply as well. That is, the MOD02SSH data productcontains calibrated and geolocated at-aperture radiances for 36 bands generated from MODIS Level 1A scans of raw radiance (MOD 01). The radiance units are in W/(m ^2 um sr). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared (SWIR), and Near Infrared (NIR) measurements are made during daytime only, while radiances for Thermal Infrared (TIR) are measured continuously.As it's parent, the MOD02SSH is in HDF-EOS format, and all metadata structures and names are preserved for better convenience. However, some relevant changes are made where appropriate. E.g. the dimension mappings are updated to reflect the new one-to-one correspondance between the data and geolocations. The latter is one of the most important differences: in the MOD02SSH, there is no offset between data and geolocation pixels. The spatial coverage is almost similar to that from MOD021KM (nominally it is 2330 by 2030 km, cross-track by along-track, respectively). The MOD02SSH is produced continuously, and thus the processing provides 2-day repeat observations of the Earth with a repeat orbitpattern every 16 days.The shortname for this product is MOD02SSH

This Near Real Time (NRT) data type (MOD02SSH) is a subsample from the MODIS Level 1B 1-km data. Every fifth pixel is taken from the MOD021KM product and written out to MOD02SSH. The subsampling starts at the third frame, and at the third line. Here, "frame" and "line" are naming conventions for pixels along and across the scan, respectively. Since MOD02SSH is a subsampled Level 1B , many things from the Level 1B documentation apply as well. That is, the MOD02SSH data productcontains calibrated and geolocated at-aperture radiances for 36 bands generated from MODIS Level 1A scans of raw radiance (MOD 01). The radiance units are in W/(m ^2 um sr). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared (SWIR), and Near Infrared (NIR) measurements are made during daytime only, while radiances for Thermal Infrared (TIR) are measured continuously.As it's parent, the MOD02SSH is in HDF-EOS format, and all metadata structures and names are preserved for better convenience. However, some relevant changes are made where appropriate. E.g. the dimension mappings are updated to reflect the new one-to-one correspondance between the data and geolocations. The latter is one of the most important differences: in the MOD02SSH, there is no offset between data and geolocation pixels. The spatial coverage is almost similar to that from MOD021KM (nominally it is 2330 by 2030 km, cross-track by along-track, respectively). The MOD02SSH is produced continuously, and thus the processing provides 2-day repeat observations of the Earth with a repeat orbitpattern every 16 days.The shortname for this product is MOD02SSH

The MODIS/Terra Level 1B Subsampled Calibrated Radiances 5km (MOD02SSH) is a subsample from the MODIS Level 1B 1-km data. Every fifth pixel is taken from the MOD021KM product and written out to MOD02SSH. The subsampling starts at the third frame, and at the third line. Here, "frame" and "line" are naming conventions for pixels along and across the scan, respectively. Since MOD02SSH is a subsampled Level 1B , many things from the Level 1B documentation apply as well. That is, the MOD02SSH data product contains calibrated and geolocated at-aperture radiances for 36 bands generated from MODIS Level 1A scans of raw radiance (MOD01). The radiance units are in W/(m^2 um sr). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared (SWIR), and Near Infrared (NIR) measurements are made during daytime only, while radiances for Thermal Infrared (TIR) are measured continuously. As its parent, the MOD02SSH is in HDF-EOS format, and all metadata structures and names are preserved for better convenience. However, some relevant changes are made where appropriate (e.g., the dimension mappings are updated to reflect the new one-to-one correspondence between the data and geolocations). The latter is one of the most important differences: in the MOD02SSH, there is no offset between data and geolocation pixels. The spatial coverage is almost similar to that from MOD021KM (nominally it is 2330 by 2030 km, cross-track by along-track, respectively). The MOD02SSH is produced continuously, and thus the processing provides 2-day repeat observations of the Earth with a repeat orbit pattern every 16 days.

This Near Real Time (NRT) data type (MYD02SSH) is a subsample from the MODIS Level 1B 1-km data. Every fifth pixel is taken from the MYD021KM product and written out to MYD02SSH. The subsampling starts at the third frame, and at the third line. Here, "frame" and "line" are naming conventions for pixels along and across the scan, respectively. Since MYD02SSH is a subsampled Level 1B , many things from the Level 1B documentation apply as well. That is, the MYD02SSH data productcontains calibrated and geolocated at-aperture radiances for 36 bands generated from MODIS Level 1A scans of raw radiance (MOD 01). The radiance units are in W/(m ^2 um sr). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared (SWIR), and Near Infrared (NIR) measurements are made during daytime only, while radiances for Thermal Infrared (TIR) are measured continuously.As it's parent, the MYD02SSH is in HDF-EOS format, and all metadata structures and names are preserved for better convenience. However, some relevant changes are made where appropriate, e.g. the dimension mappings are updated to reflect the new one-to-one correspondance between the data and geolocations. The latter is one of the most important differences: in the MYD02SSH, there is no offset between data and geolocation pixels. The spatial coverage is almost similar to that from MYD021KM (nominally it is 2330 by 2030 km, cross-track by along-track, respectively). The MYD02SSH is produced continuously, and thus the processing provides 2-day repeat observations of the Earth with a repeat orbitpattern every 16 days.The shortname for this product is MYD02SSH

This Near Real Time (NRT) data type (MYD02SSH) is a subsample from the MODIS Level 1B 1-km data. Every fifth pixel is taken from the MYD021KM product and written out to MYD02SSH. The subsampling starts at the third frame, and at the third line. Here, "frame" and "line" are naming conventions for pixels along and across the scan, respectively. Since MYD02SSH is a subsampled Level 1B , many things from the Level 1B documentation apply as well. That is, the MYD02SSH data productcontains calibrated and geolocated at-aperture radiances for 36 bands generated from MODIS Level 1A scans of raw radiance (MOD 01). The radiance units are in W/(m ^2 um sr). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared (SWIR), and Near Infrared (NIR) measurements are made during daytime only, while radiances for Thermal Infrared (TIR) are measured continuously.As it's parent, the MYD02SSH is in HDF-EOS format, and all metadata structures and names are preserved for better convenience. However, some relevant changes are made where appropriate. E.g. the dimension mappings are updated to reflect the new one-to-one correspondance between the data and geolocations. The latter is one of the most important differences: in the MYD02SSH, there is no offset between data and geolocation pixels. The spatial coverage is almost similar to that from MYD021KM (nominally it is 2330 by 2030 km, cross-track by along-track, respectively). The MYD02SSH is produced continuously, and thus the processing provides 2-day repeat observations of the Earth with a repeat orbitpattern every 16 days.The shortname for this product is MYD02SSH

This Near Real Time (NRT) data type (MYD02SSH) is a subsample from the MODIS Level 1B 1-km data. Every fifth pixel is taken from the MYD021KM product and written out to MYD02SSH. The subsampling starts at the third frame, and at the third line. Here, "frame" and "line" are naming conventions for pixels along and across the scan, respectively. Since MYD02SSH is a subsampled Level 1B , many things from the Level 1B documentation apply as well. That is, the MYD02SSH data productcontains calibrated and geolocated at-aperture radiances for 36 bands generated from MODIS Level 1A scans of raw radiance (MOD 01). The radiance units are in W/(m ^2 um sr). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared (SWIR), and Near Infrared (NIR) measurements are made during daytime only, while radiances for Thermal Infrared (TIR) are measured continuously.As it's parent, the MYD02SSH is in HDF-EOS format, and all metadata structures and names are preserved for better convenience. However, some relevant changes are made where appropriate, e.g. the dimension mappings are updated to reflect the new one-to-one correspondance between the data and geolocations. The latter is one of the most important differences: in the MYD02SSH, there is no offset between data and geolocation pixels. The spatial coverage is almost similar to that from MYD021KM (nominally it is 2330 by 2030 km, cross-track by along-track, respectively). The MYD02SSH is produced continuously, and thus the processing provides 2-day repeat observations of the Earth with a repeat orbitpattern every 16 days.The shortname for this product is MYD02SSH

The MODIS/Aqua Level 1B Subsampled Calibrated Radiance 5Km (MYD02SSH) product is a subsample from the MODIS Level 1B 1-km data. Every fifth pixel is taken from the MYD021KM product and written out to MYD02SSH. The subsampling starts at the third frame, and at the third line. Here, "frame" and "line" are naming conventions for pixels along and across the scan, respectively. Since MYD02SSH is a subsampled Level 1B product, many things from the Level 1B documentation apply as well. The MYD02SSH data product contains calibrated and geolocated at-aperture radiances for 36 bands generated from MODIS Level 1A scans of raw radiance (MOD 01). The radiance units are in W/(m ^2 um sr). Additional data are provided including quality flags, error estimates and calibration data. Visible, shortwave infrared (SWIR), and Near Infrared (NIR) measurements are made during daytime only, while radiances for Thermal Infrared (TIR) are measured continuously. As its parent, the MYD02SSH is in HDF-EOS format, and all metadata structures and names are preserved for better convenience. However, some relevant changes are made where appropriate (e.g., the dimension mappings are updated to reflect the new one-to-one correspondence between the data and geolocations). The latter is one of the most important differences: in the MYD02SSH, there is no offset between data and geolocation pixels. The spatial coverage is almost similar to that from MYD021KM (nominally it is 2330 by 2030 km, cross-track by along-track, respectively). The MYD02SSH is produced continuously, and thus the processing provides 2-day repeat observations of the Earth with a repeat orbit pattern every 16 days. See the MODIS Science Team homepage for more data set information: https://modis.gsfc.nasa.gov/data/dataprod/

This is MODIS Level-1A Near Real Time (NRT) product containing reformatted and packaged raw instrument data. MODIS instrument data, in packetized form, is reversibly transformed to a computer data structure, along with formatted engineering and spacecraft ancillary data. The Level-1A data is separated into granules for passage to the geolocation and calibration processes. Quality indicators are added to the data to indicate missing pixels and instrument modes. This product contains MODIS digitized raw detector counts data for all 36 MODIS spectral bands, at 250 m, 500 m, or 1 km spatial resolutions including all time tags, all detector views (Earth, solar diffuser, Spectro-Radiometeric Calibration Assembly (SRCA), black body, and space view), and all engineering and ancillary data. Quality indicators are added to to the data to indicate missing or bad pixels and instrument modes. Only bands 20 to 36 are used to collect measurements in night mode, while all bands are used in day mode. Visible, SWIR, and NIR measurements are made during daytime only, while radiances for TIR are measured during both day and night portions of the orbit.

This is MODIS Level-1A Near Real Time (NRT) product containing reformatted and packaged raw instrument data. MODIS instrument data, in packetized form, is reversibly transformed to a computer data structure, along with formatted engineering and spacecraft ancillary data. The Level-1A data is separated into granules for passage to the geolocation and calibration processes. Quality indicators are added to the data to indicate missing pixels and instrument modes. This product contains MODIS digitized raw detector counts data for all 36 MODIS spectral bands, at 250 m, 500 m, or 1 km spatial resolutions including all time tags, all detector views (Earth, solar diffuser, Spectro-Radiometeric Calibration Assembly (SRCA), black body, and space view), and all engineering and ancillary data. Quality indicators are added to to the data to indicate missing or bad pixels and instrument modes. Only bands 20 to 36 are used to collect measurements in night mode, while all bands are used in day mode. Visible, SWIR, and NIR measurements are made during daytime only, while radiances for TIR are measured during both day and night portions of the orbit.

The MODIS/Terra Raw Radiances in Counts 5-Min L1A Swath product (MOD01) containing reformatted and packaged raw instrument data. MODIS instrument data, in packetized form, is reversibly transformed to a computer data structure, along with formatted engineering and spacecraft ancillary data. The Level-1A data is separated into granules for passage to the geolocation and calibration processes. Quality indicators are added to the data to indicate missing pixels and instrument modes. This product contains MODIS digitized raw detector counts data for all 36 MODIS spectral bands, at 250 m, 500 m, or 1 km spatial resolutions including all time tags, all detector views (Earth, solar diffuser, Spectro-Radiometeric Calibration Assembly (SRCA), black body, and space view), and all engineering and ancillary data. Quality indicators are added to the data to indicate missing or bad pixels and instrument modes. Only bands 20 to 36 are used to collect measurements in night mode, while all bands are used in day mode. Visible, short-wave infrared (SWIR), and near infrared (NIR) measurements are made during daytime only, while radiances for thermal infrared (TIR) are measured during both day and night portions of the orbit. Data set information: MODIS Homepage https://modis.gsfc.nasa.gov/data/dataprod/ and MODIS Characterization Support Team https://mcst.gsfc.nasa.gov/