The Near-Earth Object Wide-field Infrared Survey Explorer Reactivation Mission (NEOWISE; Mainzer et al. 2014, ApJ, 792, 30) is a NASA Planetary Science Division space-based survey to detect, track and characterize asteroids and comets, and to learn more about the population of near-Earth objects that could pose an impact hazard to the Earth. NEOWISE systematically images the sky at 3.4 and 4.6 μm, obtaining multiple independent observations on each location that enable detection of previously known and new solar system small bodies by virtue of the their motion. Because it is an infrared survey, NEOWISE detects asteroid thermal emission and is equally sensitive to high and low albedo objects.The Single-exposure Source Database is a compendium of position and flux information for source detections made on the individual NEOWISE 7.7s W1 and W2 Single-exposure images. Because NEOWISE scanned the same region of the sky multiple times, the Single-exposure Database contains multiple, independent measurements of objects. Positions, magnitudes in the two NEOWISE bands, astrometric and photometric uncertainties, flags indicating measurement quality, the time of observations and associations with the AllWISE Source Catalog and 2MASS Point Source Catalog are presented for entries in the Database.

The Near-Earth Object Wide-field Infrared Survey Explorer Reactivation Mission (NEOWISE; Mainzer et al. 2014, ApJ, 792, 30) is a NASA Planetary Science Division space-based survey to detect, track and characterize asteroids and comets, and to learn more about the population of near-Earth objects that could pose an impact hazard to the Earth. NEOWISE systematically images the sky at 3.4 and 4.6 μm, obtaining multiple independent observations on each location that enable detection of previously known and new solar system small bodies by virtue of the their motion. Because it is an infrared survey, NEOWISE detects asteroid thermal emission and is equally sensitive to high and low albedo objects.The Known Solar-System Object Possible Associations List is a compendium of asteroids, comets, planets or planetary satellites, with orbits known at the time of NEOWISE data processing, that were predicted to be within the field-of-view at the time of individual NEOWISE Single-exposures. Individual objects were observed multiple times, so may have multiple entries in the list. When the predicted position of a solar system object is in proximity to a detection in the NEOWISE Single-exposures, the NEOWISE detection position and brightness information are also provided.

The NEOWISE Post-Cryo Single-exposure Source Database contains 7,337,642,955 measurements of positions and brightness information, uncertainties, time of observation and assorted quality flags made on the individual WISE 7.7s (W1 and W2) Single-exposure images. Because WISE scanned every point on the sky multiple times, the Single-exposure Database contains multiple, independent measurements of objects on the sky.Entries in the Single-exposure Source Database include detections of real astrophysical objects, as well as spurious detections of low SNR noise excursions, transient events such as hot pixels, charged particle strikes and satellite streaks, and image artifacts light from bright sources including the moon. Many of the unreliable detections are flagged in the Single-exposure Database, but they have not been filtered out as they were for the All-Sky Release Source Catalog. Therefore, the Database must be used with caution. Users are strongly encouraged to read the Cautionary Notes before using the Database.

NASA's Wide-field Infrared Survey Explorer (WISE; Wright et al. 2010) mapped the sky at 3.4, 4.6, 12, and 22 μm (W1, W2, W3, W4) in 2010 with an angular resolution of 6.1", 6.4", 6.5", & 12.0" in the four bands. WISE achieved 5σ point source sensitivities better than 0.08, 0.11, 1 and 6 mJy in unconfused regions on the ecliptic in the four bands. Sensitivity improves toward the ecliptic poles due to denser coverage and lower zodiacal background.The All-Sky Release includes all data taken during the WISE full cryogenic mission phase, 7 January 2010 to 6 August 2010, that were processed with improved calibrations and reduction algorithms. Release data products include an Atlas of 18,240 match-filtered, calibrated and coadded image sets, a Source Catalog containing positional and photometric information for over 563 million objects detected on the WISE images, and an Explanatory Supplement that is a guide to the format, content, characteristics and cautionary notes for the WISE All-Sky Release products.The WISE All-Sky Data Release Single-exposure Source Working Database contains positions and brightness information, uncertainties, time of observation and assorted quality flags for 9,479,433,101 "sources" detected on the individual WISE 7.7s (W1 and W2) and 8.8s (W3 and W4) Single-exposure images. Because WISE scanned every point on the sky multiple times, the Single-exposure Database contains multiple, independent measurements of objects on the sky.Entries in the Single-exposure Source Table include detections of real astrophysical objects, as well as spurious detections of low SNR noise excursions, transient events such as hot pixels, charged particle strikes and satellite streaks, and image artifacts light from bright sources including the moon. Many of the unreliable detections are flagged in the Single-exposure Table, but they have not been filtered out as they were for the Source Catalog. Therefore, the Table must be used with caution. Users are strongly encouraged to read the Cautionary Notes before using the Table.

The NEOWISE Post-Cryo Data Release products were generated using data taken during the mission's Post-Cryo survey phase. This phase covers the time following the exhaustion of solid hydrogen in the WISE payload inner cryogen tank, when the detectors and optics gradually warmed until they reached a stable equilibrium temperature near 73.5 K. During this time, WISE's W1 and W2 detectors continued to acquire high quality imaging data with sensitivities close to that during the mission's cryogenic survey phases. The W3 and W4 detectors were fully saturated by the thermal emission from the warming telescope. WISE scanned approximately 70% of the sky during the Post-Cryo survey phase continuing with the same strategy that was used during the full cryogenic survey. The Known Solar System Object Possible Associations List is a compendium of asteroids and comets, with orbits known at the time of WISE second-pass data processing, that were predicted to be within the field-of-view at the time of individual WISE exposures. Individual objects were observed multiple times, so may have multiple entries in the list. When the predicted position of a solar system object is in proximity to a detection in the WISE single-exposures, the WISE source position and brightness information are also provided.

The Earth Surface Mineral Dust Source Investigation (EMIT) instrument measures surface mineralogy, targeting the Earth’s arid dust source regions. EMIT is installed on the International Space Station (ISS). During its one-year mission, EMIT will take mineralogical measurements of the sunlit regions of interest between 52° N latitude and 52° S latitude. A map of the regions being investigated can be found on the EMIT website. The EMIT Level 1B Corrected Spacecraft Attitude and Ephemeris (EMITL1BATT) Version 1 data product provides both corrected and uncorrected attitude quaternions and spacecraft ephemeris data obtained from the ISS, including Earth-centered inertial (ECI) position and velocity, and associated time elements. The data are provided in 1 second intervals, and each product file contains vectors from the duration of the orbit. The time elements are copied from the ISS raw data. The data for each EMITL1BATT granule are delivered in a single Network Common Data Format 4 (netCDF-4) file.

이천에서 관측한 지구자기장 관측 및 계산된 자료 입니다. 해당 데이터가 보유한 컬럼은 다음과 같습니다. 컬럼명 : 관측일시, X성분 지구자기장(관측값), Y성분 지구자기장(관측값), Z성분 지구자기장(관측값), 지구자기장 크기(관측값)

The Earth Surface Mineral Dust Source Investigation (EMIT) instrument measures surface mineralogy, targeting the Earth’s arid dust source regions. EMIT is installed on the International Space Station (ISS). EMIT uses imaging spectroscopy to take mineralogical measurements of the sunlit regions of interest between 52° N latitude and 52° S latitude. An interactive map showing the regions being investigated, current and forecasted data coverage, and additional data resources can be found on the VSWIR Imaging Spectroscopy Interface for Open Science [(VISIONS): EMIT Open Data Portal](https://earth.jpl.nasa.gov/emit/data/data-portal/coverage-and-forecasts/).The EMIT Level 1B Corrected Spacecraft Attitude and Ephemeris (EMITL1BATT) Version 1 data product provides both corrected and uncorrected attitude quaternions and spacecraft ephemeris data obtained from the ISS, including Earth-centered inertial (ECI) position and velocity, and associated time elements. The data are provided in 1 second intervals, and each product file contains vectors from the duration of the orbit. The time elements are copied from the ISS raw data. The data for each EMITL1BATT granule are delivered in a single Network Common Data Format 4 (netCDF-4) file.Known Issues* Data acquisition gap: From September 13, 2022, through January 6, 2023, a power issue outside of EMIT caused a pause in operations. Due to this shutdown, no data were acquired during that timeframe.

NASA's Wide-field Infrared Survey Explorer (WISE; Wright et al. 2010) mapped the sky at 3.4, 4.6, 12, and 22 μm (W1, W2, W3, W4) in 2010 with an angular resolution of 6.1", 6.4", 6.5", & 12.0" in the four bands. WISE achieved 5σ point source sensitivities better than 0.08, 0.11, 1 and 6 mJy in unconfused regions on the ecliptic in the four bands. Sensitivity improves toward the ecliptic poles due to denser coverage and lower zodiacal background.The All-Sky Release includes all data taken during the WISE full cryogenic mission phase, 7 January 2010 to 6 August 2010, that were processed with improved calibrations and reduction algorithms. Release data products include an Atlas of 18,240 match-filtered, calibrated and coadded image sets, a Source Catalog containing positional and photometric information for over 563 million objects detected on the WISE images, and an Explanatory Supplement that is a guide to the format, content, characteristics and cautionary notes for the WISE All-Sky Release products.The WISE All-Sky Data Release Single-exposure Source Working Database contains positions and brightness information, uncertainties, time of observation and assorted quality flags for 9,479,433,101 "sources" detected on the individual WISE 7.7s (W1 and W2) and 8.8s (W3 and W4) Single-exposure images. Because WISE scanned every point on the sky multiple times, the Single-exposure Database contains multiple, independent measurements of objects on the sky.Entries in the Single-exposure Source Table include detections of real astrophysical objects, as well as spurious detections of low SNR noise excursions, transient events such as hot pixels, charged particle strikes and satellite streaks, and image artifacts light from bright sources including the moon. Many of the unreliable detections are flagged in the Single-exposure Table, but they have not been filtered out as they were for the Source Catalog. Therefore, the Table must be used with caution. Users are strongly encouraged to read the Cautionary Notes before using the Table.