This GeoTiff is a mosaic of World View 2 panchromatic satellite imagery of Northeast Puerto Rico that contains the shallow water area (0-35m deep) surrounding Northeast Puerto Rico and Culebra Island. The WV2 imagery was processed using ArcGIS tools to cloudmask, deglint and water-column correct the image (Lyzenga method) then using PCI imagery analysis to create a continues, color balanced mosaic. The DigitalGlobe WV2 is a commercial high resolution (0.5m - 1.5m) multi-spectral satellite that surveyed the NEPR area in 2011-2013. The enhanced Red, Green, Blue and Near Infrared 1 bands allowed the Biogeography branch to delineate habitats using feature extraction tools in Envi 5.1 software. The multispectral bands were analyzed to detect coral reefs and seagrass beds under the surface of the water, as well as features above the surface, such as mangroves, salt ponds, and the shoreline edges. The WV2 mosaic, the bathymetry model, principle component analysis, and aerial imagery were all used integrally to create the NEPR Benthic Habitat Map.

This GeoTiff is a bathymetry model of the seafloor of Northeast Puerto Rico that contains the shallow water area (0-35m deep) of the Northeast Ecological Reserve: including the waters off of Fajardo and Luqillo, to the Former Roosevelt Roads Navy Base, the Vieques Sound, La Cordillera Reserve, the Luis Pena Reserve, and the waters around Culebra Island. The bathymetry model was created by integrating soundings from several different sources (1900-2013), including high resolution coastal LiDAR, NOAA Single-beam and multibeam bathymetry, and historical lead line soundings. In order to combine the many different data sources and densities, the model consists of three different resolutions (4m, 20m and 100m). In addition to the depth model, a depth uncertainty layer was also produced. The bathymetry model is the basis for the benthic habitat map which was produced by remote sensing analysis tools that delineated the habitats using a semi-automated classification process.

This image represents a 3 meter resolution backscatter mosaic of selected portions of seafloor around Isla de Vieques, Puerto Rico. NOAA's NOS/NCCOS/CCFHR, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in Puerto Rico from 3/27/08 to 4/5/08. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The backscatter component of the bathymetry data was geometrically and radiometrically corrected using Geocoder 3.2.1 software. Acoustic backscatter mosaics are an important piece of information when characterizing surficial seafloor features and delineating benthic habitats. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependent on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

This image represents a 4 meter resolution backscatter mosaic of of a sharply sloping swath of the St. John Shelf, south of St. John, US Virgin Islands. NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in the US Virgin Islands from 3/28/2011 to 4/14/2011. Data was acquired with a hull-mounted Kongsberg 1002 multibeam echosounder (95 kHz) and processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Hypack 2011 Geocoder software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

This image represents a 2 meter resolution backscatter mosaic of the southern coast of Isla de Mona, collected using a Kongsberg EM 1002 (95 kHz) multibeam echosounder.NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in the U.S. Caribbean from 4/14/07 to 4/24/07. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz) and with a moon pool-mounted Reson 8124 multibeam echosounder (200 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides from NOAA COOPS. Data is in UTM zone 19 north, datum NAD83. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.0 software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependent on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

This image represents a 2 meter resolution backscatter mosaic of a broad bank south of St. Thomas, US Virgin Islands. NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in the US Virgin Islands from 3/28/2011 to 4/14/2011. Data was acquired with a hull-mounted Reson 7125 multibeam echosounder (400 kHz) and processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Hypack 2011 Geocoder software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

This image represents a 2 meter resolution backscatter mosaic of the bathymetry of a sharply sloping swath of the St. John Shelf, St. John, USVI. NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in the US Virgin Islands from 3/28/2011 to 4/14/2011. Data was acquired with a hull-mounted Reson 7125 multibeam echosounder (400 kHz) and processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Hypack 2011 Geocoder software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

This dataset contains a unified GeoTiff with 10x10 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the South Atlantic Bight, derived from data collected in November 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the South Atlantic Bight from 11/13/2010 to 11/22/2010. Data was acquired with a hull-mounted Kongsberg Simrad EM 122 multibeam echosounder (100 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.

This geographic zone map was created by interpreting satellite and aerial imagery, seafloor topography (bathymetry model), and the new NEPR Benthic Habitat Map (2015). The area of interest includes the nearshore shallow waters (0-35m) of Fajardo and Luqillo to the Former Roosevelt Roads Navy Base, the Vieques Sound, La Cordillera Reserve, the Luis Pena Reserve, and the waters around Culebra Island. A zone refers to each benthic community's geographic location and geomorphological structure. The geographic zone map was manually digitized the shoreline and the zone features for the entire area of interest in ArcGIS at the 1:6000 scale. The map was classified into 12 geographic zones based on the schema that has been developed by the Biogeography Branch, and which also match the Coastal and Marine Ecological Classification Standard (CMECS).

This dataset contains an ESRI Geotiff with 3 meter cell size representing the bathymetry of a selected portion of seafloor south of Isla de Vieques in Puerto Rico, derived from data collected in 2008. NOAA's NOS/NCCOS/CCFHR, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in Puerto Rico from 3/27/08 to 4/5/08. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. An ASCII XYZ file was exported from the BASE surface and imported to ESRI ArcMap 9.2 using the 'Convert XYZ to Raster' tool developed by NOS/NCCOS/CCMA for this purpose. This was used to produce the final Bathymetry Geotiff. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependent on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.