,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

,This is a national data collection of data resources managed by the Bureau of Ocean Energy Management (BOEM) for the Outer Continental Shelf (OCS). The data collection is designated as a National Geospatial Data Asset (NGDA) and includes: OCS BOEM Offshore Boundary Lines (Submerged Lands Act Boundary, OCSLA Limit of “8(g) Zone,” and Continental Shelf Boundary), OCS Protraction Polygons - 1st Division, OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division, OCS Block Polygons - 2nd Division, OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division, and Aliquot 16ths Polygons - 3rd Division.,,All polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries reflecting federal jurisdiction. The NAD27 Gulf of Mexico Protractions and Blocks have a different protraction and block configuration when compared to the OCS Protraction Polygons - 1st Division and OCS Block Polygons - 2nd Division. The NAD27 Gulf of Mexico data is used for Oil and Gas leasing.,,These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM"s enterprise GIS. However, the services in this collection have been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates,these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.,Layers Metadata,OCS BOEM Offshore Boundary Lines,OCS Protraction Polygons - 1st Division,OCS Gulf of Mexico NAD27 Protraction Polygons - 1st Division,OCS Block Polygons - 2nd Division,OCS Gulf of Mexico NAD27 Block Polygons - 2nd Division,Aliquot 16ths Polygons - 3rd Division,

This data set contains BOEM Planning Area outlines in ESRI shapefile format for the BOEM Alaska Region. The Submerged Lands Act (SLA) boundary, along with the Continental Shelf Boundary (CSB), the Limit of Protraction were used to complete the polygons for the Planning Areas. Because GIS projection and topology functions can change or generalize coordinates, and because shapefiles can not represent true arcs, these GIS files are considered to be approximate and are NOT an OFFICIAL record for the exact block coordinates or areas. The Official Protraction Diagrams (OPDs) and Supplemental Official OCS Block Diagrams (SOBDs) serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. If any discrepancies are found between these shapefiles and the OPDs and SOBDs, it is the OPD and SOBD diagrams which take precidence. Also note that the BOEM cadastre is developed on a UTM projection, and most Planning Areas span multiple UTM zones. This means that area values computed from these shapefiles will not match the official BOEM areas.

This data set contains Official Protraction Diagrams (OPDs) in Adobe PDF format. Pacific Region OPDs are approximately 2 degrees wide by one degree high. OPDs are further subdivided into blocks that are 4800 x 4800 meters on a UTM plane. Where the OPD hits the UTM zone boundary, that zone boundary will be a geodesic line - which will appear slightly curved on the UTM plane. OPDs are numbered using the United Nations International Map of the World Numbering System, and are generally named for land or hydrographic features contained within the limits of the diagram. Further information on the historic development of OPD's can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf: Also see the metadata for each of the individual GIS files used to create these OPDs. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

This data set contains Supplemental Official OCS Block Diagram (SOBD) images in Adobe pdf format for areas within the BOEM Pacific Region. Each SOBD describes a single block within an Official Protraction Diagram (OPD) and shows the lines (Submerged Lands Act, Limit of '8(g) Zone', maritime boundaries and/or marine sanctuaries) which occur within that block and divide it into different areas. The SOBD contains additional coordinates and area calculations for an individual block. These data are scanned images of the official paper SOBD's produced by the BOEM. Note that not all OPDs have boundaries cutting through them, so not all OPDs will have SOBDs generated for them. All current leasing activities will be done using the most current SOBDs. Historical (outdated) SOBDs can be obtained by contacting the Geospatial Services Division. Further information on the historic development of OPD's can be found in OCS Report BOEM 99-0006: Boundary Development on the Outer Continental Shelf: https://www.boem.gov/uploadedFiles/BOEM/Oil_and_Gas_Energy_Program/Mapping_and_Data/99-0006.pdf Also see the metadata for each of the individual GIS files used to create these SOBDs. The Official Protraction Diagrams (OPDs) and Supplemental Official Block Diagrams (SOBDs), serve as the legal definition for BOEM offshore boundary coordinates and area descriptions.

,

,Since 1998, geoscientists at the Bureau of Ocean Energy Management (BOEM) have identified and mapped over 31,000 water bottom (seafloor) acoustic amplitude anomalies in the deep water northern Gulf of Mexico (GOM) using 3-D time-migrated seismic surveys. The purpose of this mapping program is to understand the distribution of natural hydrocarbon seeps and related benthic fauna (chemosynthetic and coral communities) in the GOM, and to characterize other seafloor features related to the geological framework of the seafloor. These areas show anomalously high or low acoustic amplitude response relative to typical background, with most areas having overlapping seismic coverage by two or more surveys. These results cover over 230,000 square kilometers of seismic data interpretation. See BOEM website for more detailed information, https://www.boem.gov/Oil-and-Gas-Energy-Program/Mapping-and-Data/Map-Gallery/Seismic-Water-Bottom-Anomalies-Map-Gallery.aspx,