A digital camera mounted inside the bell tower of the Mission of Sts. Peter and Paul church was used to photograph the shoreline of Waimea Bay beach park on the North Shore of the island of Oahu in the State of Hawaii. The oblique camera view presented here captures the entire breadth of the beach park looking outwards over Kamehameha Highway towards the southwest. It operated for over 4.5 years between February 5, 2009 and October 14, 2013. Capturing hourly snapshots at a set vantage point during the local daytime hours of 6:00 AM or 7:00 AM to 5:00 PM, these images are useful for tracking beach dynamics such as wave run-up, sand movement, turbidity plumes, and Waimea River outflow over time. The camera was mounted in the bell tower windows for a total height of 20 meters above ground level or 31 meters above mean sea level. See also beachcam_004 for an alternate camera view from the same location pointing further offshore inside of Waimea Bay.

A digital camera on top of the Sheraton Waikiki hotel was used to photograph the shoreline of Waikiki beach along the South Shore of the island of Oahu in the State of Hawaii. The oblique camera view presented here captures the shoreline leading southeast towards Diamond Head crater. It operated for over 4.5 years between February 5, 2009 and October 13, 2013. Capturing hourly snapshots at a set vantage point during the local daytime hours of 6:00 AM or 7:00 AM to 5:00 PM, these images are useful for tracking beach dynamics such as wave run-up, sand movement, and turbidity plumes over time. The camera was mounted on top of a 3 meter wall extending above the roof surface for a total height of 93 meters above ground level or 96 meters above mean sea level. See also beachcam_002 for an alternate camera view from the same location pointing directly downwards.

A digital camera on top of the Sheraton Waikiki hotel was used to photograph the shoreline of Waikiki beach along the South Shore of the island of Oahu in the State of Hawaii. The orthogonal camera view presented here is taken in the nadir direction (vertically downwards) towards the Sheraton boardwalk and its nearshore surroundings. It operated for over 4.5 years between February 5, 2009 and October 13, 2013. Capturing hourly snapshots at a set vantage point during the local daytime hours of 6:00 AM or 7:00 AM to 5:00 PM, these images are useful for tracking beach dynamics such as wave run-up, sand movement, and turbidity plumes over time. The camera was mounted on top of a 3 meter wall extending above the roof surface for a total height of 93 meters above ground level or 96 meters above mean sea level. See also beachcam_001 for an oblique camera view from the same location pointing southeast towards Diamond Head crater.

Wave buoy 225 measures wave height, wave direction, wave period, and water temperature in the vicinity of Kaneohe Bay at the Wave Energy Test Site (WETS) of the U.S. Marine Corps Base Hawaii (MCBH) on the windward (eastern) coast of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 80 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 198 measures wave height, wave direction, wave period, and water temperature in the vicinity of Kaneohe Bay on the windward (eastern) coast of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 81 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 239 measures wave height, wave direction, wave period, and water temperature approximately 4 km (2.5 mi) southwest of Kaumalapau Harbor on the leeward (western) coast of Lanai in the State of Hawaii. Data are transmitted every half hour. Moored in water 239 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike. For historical wave observations at a nearby location, please visit the archive of the Kaumalapau wave buoy (cdip146) that operated between May 17, 2007 and May 3, 2017. The historical buoy location experienced significant damage during vessel strikes and was replaced by wave buoy 239 in a less frequented area to help avoid future collisions.

Wave buoy 165 measures wave height, wave direction, wave period, and water temperature in the vicinity of Barbers Point on the leeward (western) coast of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 300 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike. For recent wave observations at a nearby location, please visit the Kalaeloa Barbers Point wave buoy (cdip238). Because this historical Barbers Point buoy location experienced significant damage during vessel strikes, it was decommissioned and later replaced by the Kalaeloa Barbers Point wave buoy in a less frequented area to help avoid future collisions.

Wave buoy 106 measures wave height, wave direction, wave period, and water temperature in the vicinity of Waimea Bay on the North Shore of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 200 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 202 measures wave height, wave direction, wave period, and water temperature in the vicinity of Hanalei on the North Shore of Kauai in the State of Hawaii. Data are transmitted every half hour. Moored in water 244 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 146 measures wave height, wave direction, wave period, and water temperature in the vicinity of Kaumalapau Harbor on the leeward (western) coast of Lanai in the State of Hawaii. Data are transmitted every half hour. Moored in water 201 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike. For recent wave observations at a nearby location, please visit the Lanai Southwest wave buoy (cdip239). Because this historical Kaumalapau buoy location experienced significant damage during vessel strikes, it was decommissioned and later replaced by the Lanai Southwest wave buoy in a less frequented area to help avoid future collisions.