Wave buoy 106 measures wave height, wave direction, wave period, and water temperature in the vicinity of Waimea Bay on the North Shore of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 200 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 198 measures wave height, wave direction, wave period, and water temperature in the vicinity of Kaneohe Bay on the windward (eastern) coast of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 81 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 225 measures wave height, wave direction, wave period, and water temperature in the vicinity of Kaneohe Bay at the Wave Energy Test Site (WETS) of the U.S. Marine Corps Base Hawaii (MCBH) on the windward (eastern) coast of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 80 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 098 measures wave height, wave direction, wave period, and water temperature in the vicinity of Mokapu Point on the windward (eastern) coast of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 82 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 273 measures wave height, wave direction, wave period, water temperature, air temperature, and surface currents at Poloa, Tutuila, approximately 2.5 miles (4 km) northwest of Legaotaema Point and Cape Taputapu offshore of Poloa Bay and Poloa Village Marine Protected Area at the western end of Tutuila Island in American Samoa. Wave data are transmitted every half hour. Surface currents data are transmitted every 10 minutes. Water and air temperature data are transmitted every 5 minutes. Moored in water 54 meters deep, this Datawell Directional Waverider DRW4 buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. This buoy also uses an acoustic current meter (ACM) to measure the speed and direction of ocean currents at approximately 1 meter below the surface. The water temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. A compact air temperature (CAT4) sensor is attached to the antenna at approximately 2 meters above the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike. PacIOOS and partners collaborated with the family of the late Christopher J. King to name this wave buoy in honor of the contributions he bestowed upon the siting of this buoy, and more importantly, upon the people of American Samoa.

Wave buoy 165 measures wave height, wave direction, wave period, and water temperature in the vicinity of Barbers Point on the leeward (western) coast of Oahu in the State of Hawaii. Data are transmitted every half hour. Moored in water 300 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike. For recent wave observations at a nearby location, please visit the Kalaeloa Barbers Point wave buoy (cdip238). Because this historical Barbers Point buoy location experienced significant damage during vessel strikes, it was decommissioned and later replaced by the Kalaeloa Barbers Point wave buoy in a less frequented area to help avoid future collisions.

Wave buoy 178 measures wave height, wave direction, wave period, water temperature, air temperature, and surface currents at North Point, Pohnpei, approximately 2 miles (3 km) offshore of the northernmost barrier reef and approximately 5 miles (8 km) north of Parem Island in the Federated States of Micronesia (FSM). Wave data are transmitted every half hour. Surface currents data are transmitted every 10 minutes. Water and air temperature data are transmitted every 5 minutes. Moored in water 827 meters deep, this Datawell Directional Waverider DRW4 buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. This buoy also uses an acoustic current meter (ACM) to measure the speed and direction of ocean currents at approximately 1 meter below the surface. The water temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. A compact air temperature (CAT4) sensor is attached to the antenna at approximately 2 meters above the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 188 measures wave height, wave direction, wave period, and water temperature in the vicinity of Hilo Bay on the windward (eastern) coast of Big Island in the State of Hawaii. Data are transmitted every half hour. Moored in water 347 meters deep, this Datawell Directional Waverider Mark III (DWR-MkIII) buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. The temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 219 measures wave height, wave direction, wave period, water temperature, air temperature, and surface currents at approximately 1.5 miles (2.4 km) offshore of Ngaraard state near the village of Elab along the northeast point of Babeldaob island in the Republic of Palau. Wave data are transmitted every half hour. Surface currents data are transmitted every 10 minutes. Water and air temperature data are transmitted every 5 minutes. Moored in water 105 meters deep, this Datawell Directional Waverider DRW4 buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. This buoy also uses an acoustic current meter (ACM) to measure the speed and direction of ocean currents at approximately 1 meter below the surface. The water temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. A compact air temperature (CAT4) sensor is attached to the antenna at approximately 2 meters above the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.

Wave buoy 272 measures wave height, wave direction, wave period, water temperature, air temperature, and surface currents at Rumung, Yap, approximately 1.25 miles (2 km) offshore of the northernmost barrier reef and approximately 3 miles (5 km) north of Rumung Island, the northernmost island of the Yap island group in the Federated States of Micronesia (FSM). Wave data are transmitted every half hour. Surface currents data are transmitted every 10 minutes. Water and air temperature data are transmitted every 5 minutes. Moored in water 650 meters deep, this Datawell Directional Waverider DRW4 buoy is equipped with three accelerometers measuring north/south, east/west, and vertical displacements, allowing it to measure both wave direction and wave energy. This buoy also uses an acoustic current meter (ACM) to measure the speed and direction of ocean currents at approximately 1 meter below the surface. The water temperature sensor is located at the base of the 0.9 meter spherical buoy, approximately 45 cm or 18 inches below the ocean surface. A compact air temperature (CAT4) sensor is attached to the antenna at approximately 2 meters above the ocean surface. Wave buoys are useful tools for forecasting local waves and are used by recreational and professional ocean users alike.