,

,

,

In-stream habitat data include measurements of a variety of physical and aquatic stream attributes that collectively reveal a great deal about stream condition for salmonids and trout. Characterizing and inventorying the physical conditions that define stream habitat for salmonids is an important part of the habitat restoration process. The California Department of Fish and Wildlife (CDFW) collects data on a number of physical attributes of streams and classifies these streams by one of several habitat types. The in-stream habitat data collection process involves two distinct steps; identifying channel type and assigning a habitat type. These in-stream habitat data are used for a variety of purposes including analysis of stream suitability for supporting salmonid populations, as part of larger and more complex watershed assessments, and to establish baseline conditions against which future assessments can measure change. They are a critical part of determining restoration priorities and identifying salmonid refugia. The California Salmonid Stream Habitat Restoration Manual published by the CDFW, describes the process of using in-stream habitat data and other data and information for identifying streams with restoration potential and working through the stream restoration process.The objective of stream inventory reports are to document the current habitat conditions and recommend options for the potential enhancement of salmonid habitat. Recommendations for habitat improvement activities are based upon target habitat values suitable for salmonids in Californias streams.

,

In-stream habitat data include measurements of a variety of physical and aquatic stream attributes that collectively reveal a great deal about stream condition for salmonids and trout. Characterizing and inventorying the physical conditions that define stream habitat for salmonids is an important part of the habitat restoration process. The California Department of Fish and Wildlife (CDFW) collects data on a number of physical attributes of streams and classifies these streams by one of several habitat types. The in-stream habitat data collection process involves two distinct steps; identifying channel type and assigning a habitat type. These in-stream habitat data are used for a variety of purposes including analysis of stream suitability for supporting salmonid populations, as part of larger and more complex watershed assessments, and to establish baseline conditions against which future assessments can measure change. They are a critical part of determining restoration priorities and identifying salmonid refugia. The California Salmonid Stream Habitat Restoration Manual published by the CDFW, describes the process of using in-stream habitat data and other data and information for identifying streams with restoration potential and working through the stream restoration process.The objective of stream inventory reports are to document the current habitat conditions and recommend options for the potential enhancement of salmonid habitat. Recommendations for habitat improvement activities are based upon target habitat values suitable for salmonids in Californias streams.

The fish dataset presents results from High Mountain Lakes (HML), SLIP (Sierra Lakes Inventory), and Redwood Sciences Laboratory (RSL) project fishery surveys. Both projects collected data on high elevation waters in the Sierra Nevada and mountains of Northern California using a standard protocol. Surveys of fish, amphibians, habitat, and stream barriers were done at each site between late-May and October. Fish surveys were mainly done using standardized 6 panel monofilament gill nets, set for 8-12 hours. Fish species, length, weight, and sex are recorded for each individual. As many sites were only visited once, the data presented represent a "snapshot" view of the fish population in a particular lake. SLIP surveys were done in the John Muir Wilderness by Roland Knapps crews in 1995-1996. HML surveys were done in Regions 2, 4 and 6 by CA DFW crews between 2001 and 2010. CDFW crews did not survey within National Park boundaries and no SLIP data from National Parks is included here. RSL surveys were conducted between 2001 and 2006, and additional surveys in Northern California ranges were conducted by HML crews in 2008 and 2010. As of May 2010, approximately 85% of the total mapped waters in the High Mountain Lakes range have been surveyed. It should be noted that the High Mountain Lakes expanded in 2007 to include water bodies in cascades frog range. "Baseline" survey types indicate a full survey was done at the site, including amphibian, fish, habitat characteristics, tributary characteristics, and photos. Generally this survey type occurs during the initial visit to a particular site. "Monitoring" surveys are repeat surveys of fish or amphibian populations at a site, and generally do not include habitat or stream barrier data. WHAT EACH RECORD REPRESENTS: This dataset represents field data collected in high elevation Sierra Nevada and Northern California lakes, meadows, streams, and springs. If no fish were observed, each record represents a single fish survey. If

The fish dataset presents results from High Mountain Lakes (HML), SLIP (Sierra Lakes Inventory), and Redwood Sciences Laboratory (RSL) project fishery surveys. Both projects collected data on high elevation waters in the Sierra Nevada and mountains of Northern California using a standard protocol. Surveys of fish, amphibians, habitat, and stream barriers were done at each site between late-May and October. Fish surveys were mainly done using standardized 6 panel monofilament gill nets, set for 8-12 hours. Fish species, length, weight, and sex are recorded for each individual. As many sites were only visited once, the data presented represent a "snapshot" view of the fish population in a particular lake. SLIP surveys were done in the John Muir Wilderness by Roland Knapps crews in 1995-1996. HML surveys were done in Regions 2, 4 and 6 by CA DFW crews between 2001 and 2010. CDFW crews did not survey within National Park boundaries and no SLIP data from National Parks is included here. RSL surveys were conducted between 2001 and 2006, and additional surveys in Northern California ranges were conducted by HML crews in 2008 and 2010. As of May 2010, approximately 85% of the total mapped waters in the High Mountain Lakes range have been surveyed. It should be noted that the High Mountain Lakes expanded in 2007 to include water bodies in cascades frog range. "Baseline" survey types indicate a full survey was done at the site, including amphibian, fish, habitat characteristics, tributary characteristics, and photos. Generally this survey type occurs during the initial visit to a particular site. "Monitoring" surveys are repeat surveys of fish or amphibian populations at a site, and generally do not include habitat or stream barrier data. WHAT EACH RECORD REPRESENTS: This dataset represents field data collected in high elevation Sierra Nevada and Northern California lakes, meadows, streams, and springs. If no fish were observed, each record represents a single fish survey. If

In-stream habitat data include measurements of a variety of physical and aquatic stream attributes that collectively reveal a great deal about stream condition for salmonids and trout. Characterizing and inventorying the physical conditions that define stream habitat for salmonids is an important part of the habitat restoration process. The California Department of Fish and Wildlife (CDFW) collects data on a number of physical attributes of streams and classifies these streams by one of several habitat types. The in-stream habitat data collection process involves two distinct steps; identifying channel type and assigning a habitat type. These in-stream habitat data are used for a variety of purposes including analysis of stream suitability for supporting salmonid populations, as part of larger and more complex watershed assessments, and to establish baseline conditions against which future assessments can measure change. They are a critical part of determining restoration priorities and identifying salmonid refugia. The California Salmonid Stream Habitat Restoration Manual published by the CDFW, describes the process of using in-stream habitat data and other data and information for identifying streams with restoration potential and working through the stream restoration process.The objective of stream inventory reports are to document the current habitat conditions and recommend options for the potential enhancement of salmonid habitat. Recommendations for habitat improvement activities are based upon target habitat values suitable for salmonids in Californias streams.

This data set is an extract of the California Watershed (calwater) dataset. It has been generalized to hydrologic sub-areas for those watersheds that are considered part of the coastal steelhead trout range.