This data set contains mosaicked Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images for the Oklahoma North and Oklahoma South, USA regional study areas.

This data set provides imagery developed from Landsat 5 and 7 Thematic Mapper (TM) data for use in studying land cover features during the Soil Moisture Experiment 2002 (SMEX02). The images are the result of combining bands 4, 3, and 2 as red, green, and blue to generate false-color composites.

This data set provides brightness temperature data, acquired during the Soil Moisture Experiment 2002 (SMEX02) by the Special Sensor Microwave/Imagery (SSM/I).

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Level 1A (AST_L1A) contains reconstructed, instrument digital numbers (DNs) derived from the acquired telemetry streams of the telescopes: Visible and Near Infrared (VNIR), Shortwave Infrared (SWIR), and Thermal Infrared (TIR). Additionally, geometric correction coefficients and radiometric calibration coefficients are calculated and appended to the metadata, but not applied. The spatial resolution is 15 m (VNIR), 30 m (SWIR), and 90 m (TIR) with a temporal coverage of 2000 to present. Starting June 23, 2021, radiometric calibration coefficient Version 5 (RCC V5) will be applied to newly observed ASTER data and archived ASTER data products. Details regarding RCC V5 are described in the following journal article.Tsuchida, S., Yamamoto, H., Kouyama, T., Obata, K., Sakuma, F., Tachikawa, T., Kamei, A., Arai, K., Czapla-Myers, J.S., Biggar, S.F., and Thome, K.J., 2020, Radiometric Degradation Curves for the ASTER VNIR Processing Using Vicarious and Lunar Calibrations: Remote Sensing, v. 12, no. 3, at https://doi.org/10.3390/rs12030427.

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Level 1A (AST_L1A) contains reconstructed, instrument digital numbers (DNs) derived from the acquired telemetry streams of the telescopes: Visible and Near Infrared (VNIR), Shortwave Infrared (SWIR), and Thermal Infrared (TIR). Additionally, geometric correction coefficients and radiometric calibration coefficients are calculated and appended to the metadata but not applied.Know Issues* The QAPERCENTINTERPOLATEDDATA field in .met files was found to be inconsistent due to a software upgrade. Following evaluation by the ASTER Science Team, it was determined to have no impact on science data and has been set to 0 and nullified.* SWIR data acquired after April 2008 may exhibit anomalous saturation and striping. Users should consult the ASTER SWIR User Advisory for additional details.Improvements/Changes from Previous Versions* Radiometric Calibration Update: Version 4 applies Radiometric Calibration Coefficient Version 5 (RCC V5) to improve the radiometric accuracy of the raw DNs, based on research by [Tsuchida and others (2020)](https://doi.org/10.3390/rs12030427), published in Remote Sensing.

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Expedited Level 1A Reconstructed Unprocessed Instrument Data (AST_L1AE) global product contains reconstructed, unprocessed instrument digital data derived from the acquired telemetry streams of the telescopes: Visible and Near Infrared (VNIR), Shortwave Infrared (SWIR), and Thermal Infrared (TIR). This data product is similar to the (AST_L1A) (http://doi.org/10.5067/ASTER/AST_L1A.003) with a few notable exceptions. These include:* The AST_L1AE is available for download within 48 hours of acquisition in support of field calibration and validation efforts, in addition to emergency response for natural disasters where the quick turn-around time from acquisition to availability would prove beneficial in initial damage or impact assessments.* The registration quality of the AST_L1AE is likely to be lower than the AST_L1A, and may vary from scene to scene.* The AST_L1AE data product does not contain the VNIR 3B (aft-viewing) Band.* This dataset does not have short-term calibration for the Thermal Infrared (TIR) sensor.* The AST_L1AE data product is only available for download 30 days after acquisition. It is then removed and reprocessed into an AST_L1A product.

Notice to Data Users: The documentation for this data set was provided solely by the Principal Investigator(s) and was not further developed, thoroughly reviewed, or edited by NSIDC. Thus, support for this data set may be limited.This data set contains meteorological and flux data collected within the Walnut Creek watershed in central Iowa, USA. The data set includes eddy covariance and ancillary data measured from a variety of sensors mounted on meteorological towers in agricultural fields.

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Level-1B (AST_L1B) Registered Radiance at the Sensor data product is radiometrically calibrated and geometrically co-registered. Application of intra-telescope and inter-telescope registration corrections for all bands are relative to the reference band for each telescope: Visible and Near Infrared (VNIR) Band 2, Shortwave Infrared (SWIR) Band 6, and Thermal Infrared (TIR) Band 11. The spatial resolution is 15 m (VNIR), 30 m (SWIR), and 90 m (TIR) with a temporal coverage of 2000 to present. Starting June 23, 2021, radiometric calibration coefficient Version 5 (RCC V5) will be applied to newly observed ASTER data and archived ASTER data products. Details regarding RCC V5 are described in the following journal article.Tsuchida, S., Yamamoto, H., Kouyama, T., Obata, K., Sakuma, F., Tachikawa, T., Kamei, A., Arai, K., Czapla-Myers, J.S., Biggar, S.F., and Thome, K.J., 2020, Radiometric Degradation Curves for the ASTER VNIR Processing Using Vicarious and Lunar Calibrations: Remote Sensing, v. 12, no. 3, at https://doi.org/10.3390/rs12030427.

The ASTER Surface Radiance VNIR and SWIR (AST_09) is a multi-file product (https://lpdaac.usgs.gov/documents/996/ASTER_Earthdata_Search_Order_Instructions.pdf) that contains atmospherically corrected data for both the Visible and Near Infrared (VNIR) and Shortwave Infrared (SWIR) sensors. Each product delivery includes two Hierarchical Data Format - Earth Observing System (HDF-EOS) files: one for the VNIR, and the other for the SWIR. They are distinguished from one another by a one-second difference in the production time that appears as part of the file name. The more obvious distinguishing feature is the file size; the VNIR file is always the larger of the two. Both the VNIR and SWIR data are atmospherically corrected and are generated using the bands of the corresponding (ASTER Level 1B) (https://doi.org/10.5067/ASTER/AST_L1B.003) image.ASTER Level 2 data requests for observations that occurred after May 27, 2020 will resort back to using the climatology ozone input. Additional information can be found in the ASTER L2 Processing Options Update (https://lpdaac.usgs.gov/news/aster-l2-processing-options-update/).Starting June 23, 2021, radiometric calibration coefficient Version 5 (RCC V5) will be applied to newly observed ASTER data and archived ASTER data products. Details regarding RCC V5 are described in the following journal article.Tsuchida, S., Yamamoto, H., Kouyama, T., Obata, K., Sakuma, F., Tachikawa, T., Kamei, A., Arai, K., Czapla-Myers, J.S., Biggar, S.F., and Thome, K.J., 2020, Radiometric Degradation Curves for the ASTER VNIR Processing Using Vicarious and Lunar Calibrations: Remote Sensing, v. 12, no. 3, at https://doi.org/10.3390/rs12030427.As of December 15, 2021, the LP DAAC has implemented changes to ASTER PGE Version 3.4, which will affect all ASTER Level 2 on-demand products. Changes include:• Aura Ozone Monitoring Instrument (OMI) has been added as one of the ancillary ozone inputs for any observations made after May 27, 2020. The sequence of fallbacks for ozone will remain the same.• Toolkit has been updated from Version 5.2.17 to 5.2.20. Users may notice minor differences between the two versions. Differences may include minuscule changes in digital numbers around the peripheral of the granule and boundaries of a cloud for Surface Reflectance and Surface Radiance (AST07 and AST09) QA Data Plane depending on the Operating System and libraries being used by the user to process the data.Additionally, Climatology, which is one of the inputs for Ozone and Moisture, Temperature and Pressures (MTP) will be removed from the Earthdata Order Form. It has been observed that PGEs generated with Climatology as an input yield noticeable differences statistically during image and spectral analysis. Climatology will continue to be used as the final default if neither of the first two selectable options are available for Ozone and MTP. Users can check the OPERATIONALQUALITYFLAGEXPLANATION field in the metadata or the output file for atmospheric parameters that were applied.Aura OMI data are no longer available as an input for ASTER Level 2 data acquisitions after October 6, 2023. For data acquired after this date, ozone inputs will automatically fall back to climatology ozone inputs when Aura OMI is selected as an input. For more details, please refer to the Discontinuation of Aura OMI as an Input news announcement (https://lpdaac.usgs.gov/news/discontinuation-of-aura-omi-as-an-ancillary-ozone-input-for-aster-products/).

The ASTER Surface Radiance TIR (AST_09T) is generated (https://lpdaac.usgs.gov/documents/996/ASTER_Earthdata_Search_Order_Instructions.pdf) using the five Thermal Infrared (TIR) bands (acquired either during the day or night time) between 8 and 12 µm spectral range. It provides surface-leaving radiance for the TIR bands at a spatial resolution of 90 meters, which includes both surface-emitted and surface-reflected components. It also provides the downwelling sky irradiance values (in W/m2/µm) for each of the TIR bands. This product is atmospherically corrected, and the surface-leaving radiance is of known accuracy and valid only for clear-sky scenes (cloud-free pixels). This atmospherically corrected product provides the input for generating two other higher-level products: surface spectral emissivity and surface kinetic temperature.The algorithm to correct atmospheric effects involves two elements: 1) it uses a radiative transfer model which is capable of estimating the magnitude of atmospheric emission, absorption, and scattering. It uses the Moderate Resolution Transmittance Code (MODTRAN) radiative transfer model, which calculates atmospheric transmittance and radiance for frequencies from 0 to 50,000 cmˉ¹ at moderate spectral resolution. 2) It identifies and incorporates all the necessary atmospheric parameters applicable to the location and time for which the measurements require correction. These include temperature, water vapor, elevation, ozone, and aerosols. ASTER Level 2 data requests for observations that occurred after May 27, 2020 will resort back to using the climatology ozone input. Additional information can be found in the ASTER L2 Processing Options Update (https://lpdaac.usgs.gov/news/aster-l2-processing-options-update/).Starting June 23, 2021, radiometric calibration coefficient Version 5 (RCC V5) will be applied to newly observed ASTER data and archived ASTER data products. Details regarding RCC V5 are described in the following journal article.Tsuchida, S., Yamamoto, H., Kouyama, T., Obata, K., Sakuma, F., Tachikawa, T., Kamei, A., Arai, K., Czapla-Myers, J.S., Biggar, S.F., and Thome, K.J., 2020, Radiometric Degradation Curves for the ASTER VNIR Processing Using Vicarious and Lunar Calibrations: Remote Sensing, v. 12, no. 3, at https://doi.org/10.3390/rs12030427.As of December 15, 2021, the LP DAAC has implemented changes to ASTER PGE Version 3.4, which will affect all ASTER Level 2 on-demand products. Changes include:• Aura Ozone Monitoring Instrument (OMI) has been added as one of the ancillary ozone inputs for any observations made after May 27, 2020. The sequence of fallbacks for ozone will remain the same.• Toolkit has been updated from Version 5.2.17 to 5.2.20. Users may notice minor differences between the two versions. Differences may include minuscule changes in digital numbers around the peripheral of the granule and boundaries of a cloud for Surface Reflectance and Surface Radiance (AST07 and AST09) QA Data Plane depending on the Operating System and libraries being used by the user to process the data.Additionally, Climatology, which is one of the inputs for Ozone and Moisture, Temperature and Pressures (MTP) will be removed from the Earthdata Order Form. It has been observed that PGEs generated with Climatology as an input yield noticeable differences statistically during image and spectral analysis. Climatology will continue to be used as the final default if neither of the first two selectable options are available for Ozone and MTP. Users can check the OPERATIONALQUALITYFLAGEXPLANATION field in the metadata or the output file for atmospheric parameters that were applied.