**Overview** This dataset was produced from the raw sodar .dat files from the Cleburne, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location. **Data Details** Location: 32.35, -97.44 Elevation: 258 m Output heights: Every 10 meters from 30 meters to 200 meters **Data Quality** Data from the raw files were filtered according to the following automated and manual procedures. Missing and rejected values were flagged as -999. High precipitation events as suggested by the vertical velocity values were subjected to quality control. If any vertical velocity value at any height for a given timestamp fell below a -1.5 m/s threshold, all variables at all heights at that timestamp were rejected. The raw files were also screened for nonphysical values such as wind speeds less than zero and directions outside 0-360 degrees. Finally, the data were visually examined for events of atypical sodar retrievals, such as excessive magnitudes in oscillations or periods of stagnancy.

**Overview** This dataset was produced from the raw sodar .txt files from the Brady, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location. **Data Details** Location: 31.17506, -99.32607 Elevation: 548 m Output heights: Every 10 meters from 30 meters to 200 meters **Data Quality** Data from the raw files were filtered according to the following automated and manual procedures. Missing and rejected values were flagged as -999. High precipitation events as suggested by the vertical velocity values were subjected to quality control. If any vertical velocity value at any height for a given timestamp fell below a -1.5 m/s threshold, all variables at all heights at that timestamp were rejected. On a height-by-height basis, if the signal-to- noise ratio (SNR) for any of the u, v, or w wind components reached 10 or below, all variables for that height and timestamp were rejected. The raw files were also screened for nonphysical values such as wind speeds less than zero and directions outside 0-360 degrees. Finally, the data were visually examined for events of atypical sodar retrievals, such as excessive magnitudes in oscillations or periods of stagnancy.

**Overview** This dataset was produced from the raw sodar .txt files from the Jayton, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location. **Data Details** Location: 33.01, -100.98 Elevation: 707 m Output heights: Every 10 meters from 30 meters to 200 meters **Data Quality** Data from the raw files were filtered according to the following automated and manual procedures. Missing and rejected values were flagged as -999. High precipitation events as suggested by the vertical velocity values were subjected to quality control. If any vertical velocity value at any height for a given timestamp fell below a -1.5 m/s threshold, all variables at all heights at that timestamp were rejected. On a height-by-height basis, if the signal-to-noise ratio (SNR) for any of the u, v, or w wind components reached 10 or below, all variables for that height and timestamp were rejected. The raw files were also screened for nonphysical values such as wind speeds less than zero and directions outside 0-360 degrees. Finally, the data were visually examined for events of atypical sodar retrievals, such as excessive magnitudes in oscillations or periods of stagnancy.

**Overview** This dataset was produced from the raw sodar .dat files from the Ozona, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location. **Data Details** Location: 30.56, -101.35 Elevation: 720 m Output heights: Every 10 meters from 30 meters to 200 meters **Data Quality** Data from the raw files were filtered according to the following automated and manual procedures. Missing and rejected values were flagged as -999. High precipitation events as suggested by the vertical velocity values were subjected to quality control. If any vertical velocity value at any height for a given timestamp fell below a -1.5 m/s threshold, all variables at all heights at that timestamp were rejected. The raw files were also screened for nonphysical values such as wind speeds less than zero and directions outside 0-360 degrees. Finally, the data were visually examined for events of atypical sodar retrievals, such as excessive magnitudes in oscillations or periods of stagnancy.

**Overview** This dataset was produced from the raw sodar .txt files from the Colorado City, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location. **Data Details** Location: 32.47215, -100.92134 Elevation: 673 m Output heights: Every 10 meters from 30 meters to 200 meters **Data Quality** Data from the raw files were filtered according to the following automated and manual procedures. Missing and rejected values were flagged as -999. High precipitation events as suggested by the vertical velocity values were subjected to quality control. If any vertical velocity value at any height for a given timestamp fell below a -1.5 m/s threshold, all variables at all heights at that timestamp were rejected. On a height-by-height basis, if the signal-to- noise ratio (SNR) for any of the u, v, or w wind components reached 10 or below, all variables for that height and timestamp were rejected. The raw files were also screened for nonphysical values such as wind speeds less than zero and directions outside 0-360 degrees. Finally, the data were visually examined for events of atypical sodar retrievals, such as excessive magnitudes in oscillations or periods of stagnancy.

**Overview** This dataset was produced from the raw sodar .wtb files from the St. James, MN site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location. **Data Details** Location: 43.98549, -94.5527 Elevation: 324 m Output heights: Every 5 meters from 10 meters to 200 meters **Data Quality** Data from the raw files were filtered according to the following automated and manual procedures. Missing and rejected values were flagged as -999. High precipitation events as suggested by the vertical velocity values were subjected to quality control. If any vertical velocity value at any height for a given timestamp fell below a -1.5 m/s threshold, all variables at all heights at that timestamp were rejected. On a height-by-height basis, if the SNR for any of the u, v, or w wind components reached 10 or below, all variables for that height and timestamp were rejected. The raw files were also screened for nonphysical values such as wind speeds less than zero and directions outside 0-360 degrees. Finally, the data were visually examined for events of atypical sodar retrievals, such as excessive magnitudes in oscillations or periods of stagnancy. One event of the latter variety was noted, removed, and is discussed in greater detail in the events section below.

**Overview** This dataset was produced from the raw sodar .dat files from the Reagan, TX site during the WFIP1 campaign. Quality control and formatting have been applied to transform the numerous raw files into a single file to provide user friendliness and improved wind resource characterization at this location. **Data Details** Location: 31.32, -101.48 Elevation: 822 m Output heights: Every 10 meters from 30 meters to 200 meters **Data Quality** Data from the raw files were filtered according to the following automated and manual procedures. Missing and rejected values were flagged as -999. High precipitation events as suggested by the vertical velocity values were subjected to quality control. If any vertical velocity value at any height for a given timestamp fell below a -1.5 m/s threshold, all variables at all heights at that timestamp were rejected. The raw files were also screened for nonphysical values such as wind speeds less than zero and directions outside 0-360 degrees. Finally, the data were visually examined for events of atypical sodar retrievals, such as excessive magnitudes in oscillations or periods of stagnancy.

**Data Details** Datasets are provided as ZIP files that contain all data for the campaign.

**Data Details** Datasets are provided as ZIP files that contain all data for the campaign.

**Data Details** Datasets are provided as ZIP files that contain all data for the campaign.