SOLVE2_AircraftRemoteSensing_DC8_Lidar_Data is the remotely sensed lidar trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment II (SOLVE II). Data were collected by Differential Absorption Lidar (DIAL) and the Airborne Raman Ozone, Temperature, and Aerosol Lidar (AROTAL). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.

SOLVE2_TraceGas_AircraftRemoteSensing_DC8_Data is the remotely sensed trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment II (SOLVE II). Data were collected by the Gas and Aerosol Measurement Sensor/Langley Airborne A-Band Spectrometer (GAMS/LAABS). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.

SOLVE1_AircraftRemoteSensing_DC8_LASE_Data is the remotely sensed trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment (SOLVE) by the Lidar Atmospheric Sensing Experiment (LASE) instrument. Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.

SOLVE2_AircraftRemoteSensing_DC8_AATS14_Data is the remotely sensed trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment II (SOLVE II) by the Ames 14-Channel Airborne Tracking Sunphotometer (AATS14). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.

SOLVE1_MetNav_AircraftInSItu_DC8_Data is the in-situ meteorological and navigational data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment (SOLVE). Also featured in this product is water vapor data from the Diode Laser Hygrometer (DLH) and JPL Laser Hygrometer (JLH). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.

SOLVE1_Miscellaneous_DC8_Data is the supplementary miscellaneous data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment (SOLVE). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.

SOLVE2_MetNav_AircraftInSItu_DC8_Data is the in-situ meteorological and navigational data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment II (SOLVE II). Also featured in this product is water vapor data from the Diode Laser Hygrometer (DLH). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.

SOLVE1_AircraftRemoteSensing_DC8_HSRL_Data is the remotely sensed trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment (SOLVE) by the High Spectral Resolution Lidar (HSRL). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.