The dataset consists of three raster GeoTIFF files describing the following soil properties in the US: available water capacity, field capacity, and soil porosity. The input data were obtained from the gridded National Soil Survey Geographic (gNATSGO) Database and the Gridded Soil Survey Geographic (gSSURGO) Database with Soil Data Development tools provided by the Natural Resources Conservation Service. The soil characteristics derived from the databases were Available Water Capacity (AWC), Water Content (one-third bar) (WC), and Bulk Density (one-third bar) (BD) aggregated as weighted average values in the upper 1 m of soil. AWC and WC layers were converted to mm/m to express respectively available water capacity and field capacity in 1 m of soil, and BD layer was used to produce soil porosity raster assuming that the average particle density of soils is equal to 2.65 g/cm3. For each soil property, soil maps with CONUS, Alaska, and Hawaii geographic coverages were derived from separate databases and combined into one file. To replace no data values within a raster, we used data values statistically derived from neighboring cell values. The final product is provided in a GeoTIFF format and therefore can be easily integrated into raster-based models requiring estimates of soil characteristics in the US.

The dataset consists of three raster GeoTIFF files describing the following soil properties in the US: available water capacity, field capacity, and soil porosity. The input data were obtained from the gridded National Soil Survey Geographic (gNATSGO) Database and the Gridded Soil Survey Geographic (gSSURGO) Database with Soil Data Development tools provided by the Natural Resources Conservation Service. The soil characteristics derived from the databases were Available Water Capacity (AWC), Water Content (one-third bar) (WC), and Bulk Density (one-third bar) (BD) aggregated as weighted average values in the upper 1 m of soil. AWC and WC layers were converted to mm/m to express respectively available water capacity and field capacity in 1 m of soil, and BD layer was used to produce soil porosity raster assuming that the average particle density of soils is equal to 2.65 g/cm3. For each soil property, soil maps with CONUS, Alaska, and Hawaii geographic coverages were derived from separate databases and combined into one file. To replace no data values within a raster, we used data values statistically derived from neighboring cell values. The final product is provided in a GeoTIFF format and therefore can be easily integrated into raster-based models requiring estimates of soil characteristics in the US.

USSOILS is an Arc 7.0 coverage containing hydrology-relevant information for 10,498 map units covering the entire conterminous United States. The coverage was compiled from individual State coverages contained in the October 1994 State Soil Geographic (STATSGO) Data Base produced on CD-ROM. The geo-dataset USSOILS.PAT relates (on the basis of a map unit identifier) the 10,498 map units to 78,518 polygons. The scale of the geo-dataset is 1:250,000. The INFO attribute table USSOILS.MUID_ATTS contains selected variables from the STATSGO data set for 10,501 map units (an extra 3 map units are contained in the attribute table that are not in the geo-dataset - see the 'Procedures' section below), including: the map unit identifier, a 2-character state abbreviation, available water capacity of the soil, percent clay in the soil, the actual k-factor used in the water erosion component of the universal soil loss equation, the organic material in soil, soil permeability, cumulative thickness of all soil layers, hydrologic characteristics of the soil, quality of drainage, surface slope, liquid limit of the soil, share of a map unit having hydric soils, and the annual frequency of flooding. To facilitate mapping the attribute data, the narrative section below contains instructions for transferring the information contained in the attribute table USSOILS.MUID_ATTS to the polygon attribute table USSOILS.PAT. STATSGO United States Soil Water Capacity Clay Organic material Permeability Infiltration Drainage Hydric Flood frequency Slope

This dataset consists of general soil association units. It was developed by the National Cooperative Soil Survey and supersedes the State Soil Geographic (STATSGO) dataset published in 1994. It consists of a broad based inventory of soils and non-soil areas that occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped of 1:250,000 in the continental U.S., Hawaii, Puerto, and the Virgin Islands and 1:1,000,000 in Alaska. The dataset was created by generalizing more detailed soil survey maps. Where more detailed soil survey maps were not available, data on geology, topography, vegetation, and climate were assembled, together with Land Remote Sensing Satellite (LANDSAT) images. Soils of like areas were studied, and the probable classification and extent of the soils were determined. Map unit composition was determined by transecting or sampling areas on the more detailed maps and expanding the data statistically to characterize the entire map unit. This dataset consists of georeferenced vector digital data and tabular digital data. The map data were collected in 1- by 2-degree topographic quadrangle units and merged into a seamless national dataset. The soil map units are linked to attributes in the National Soil Information system relational database, which gives the proportionate extent of the component soils and their properties. These data provide information about soil features on or near the surface of the Earth. Data were collected as part of the National Cooperative Soil Survey. These data are intended for geographic display and analysis at the state, regional, and national level. The data should be displayed and analyzed at scales appropriate for 1:250,000-scale data.

This dataset consists of general soil association units. It was developed by the National Cooperative Soil Survey and supersedes the State Soil Geographic (STATSGO) dataset published in 1994. It consists of a broad based inventory of soils and non-soil areas that occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped of 1:250,000 in the continental U.S., Hawaii, Puerto, and the Virgin Islands and 1:1,000,000 in Alaska. The dataset was created by generalizing more detailed soil survey maps. Where more detailed soil survey maps were not available, data on geology, topography, vegetation, and climate were assembled, together with Land Remote Sensing Satellite (LANDSAT) images. Soils of like areas were studied, and the probable classification and extent of the soils were determined. Map unit composition was determined by transecting or sampling areas on the more detailed maps and expanding the data statistically to characterize the entire map unit. This dataset consists of georeferenced vector digital data and tabular digital data. The map data were collected in 1- by 2-degree topographic quadrangle units and merged into a seamless national dataset. The soil map units are linked to attributes in the National Soil Information system relational database, which gives the proportionate extent of the component soils and their properties. These data provide information about soil features on or near the surface of the Earth. Data were collected as part of the National Cooperative Soil Survey. These data are intended for geographic display and analysis at the state, regional, and national level. The data should be displayed and analyzed at scales appropriate for 1:250,000-scale data.

This dataset consists of general soil association units. It was developed by the National Cooperative Soil Survey and supersedes the State Soil Geographic (STATSGO) dataset published in 1994. It consists of a broad based inventory of soils and nonsoil areas that occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped of 1:250,000 in the continental U.S., Hawaii, Puerto, and the Virgin Islands and 1:1,000,000 in Alaska. The dataset was created by generalizing more detailed soil survey maps. Where more detailed soil survey maps were not available, data on geology, topography, vegetation, and climate were assembled, together with Land Remote Sensing Satellite (LANDSAT) images. Soils of like areas were studied, and the probable classification and extent of the soils were determined. Map unit composition was determined by transecting or sampling areas on the more detailed maps and expanding the data statistically to characterize the entire map unit. This dataset consists of georeferenced vector digital data and tabular digital data. The map data were collected in 1- by 2-degree topographic quadrangle units. The soil map units are linked to attributes in the National Soil Information System relational database, which gives the proportionate extent of the component soils and their properties. These data provide information about soil features on or near the surface of the Earth. Data were collected as part of the National Cooperative Soil Survey. These data are intended for geographic display and analysis at the state, regional, and national level. The data should be displayed and analyzed at scales appropriate for 1:250,000-scale data.

This dataset consists of a 100 meter resolution raster of depth and area weighted averages for soil pH for each map unit key (MUKEY) in the U.S. Department of Agriculture, Natural Resources Conservation Service's (NRCS) State Soil Geographical (STATSGO2) database (NRCS, 2016). This raster was developed from selected criteria of soil parameters from the STATSGO2 database and mapped to MUKEYs.

This dataset consists of a 100 meter resolution raster of depth and area weighted averages for soil pH for each map unit key (MUKEY) in the U.S. Department of Agriculture, Natural Resources Conservation Service's (NRCS) State Soil Geographical (STATSGO2) database (NRCS, 2016). This raster was developed from selected criteria of soil parameters from the STATSGO2 database and mapped to MUKEYs.

This data release reformats data fields from the STATSGO soil characteristics dataset (Schwarz and Alexander, 1995) as cloud-optimized GeoTIFFs (COGs). The COG format allows standard software tools to efficiently access the datasets over an internet connection. Please refer to the documentation of the source archive (Schwarz and Alexander, 1995) for additional details on the underlying dataset. This data release includes COGs for the KF-factor (KFFACT) and soil thickness (THICK) data fields. KF-factors are defined as the saturated hydraulic conductivity of the fine soil (< 2mm) fraction in units of inches per hour. The soil thickness dataset has units of inches. Each COG raster spans the continental US at a nominal 30 meter resolution. The spatial reference is EPSG:5069. Each COG uses a float32 precision, and the NoData value (NaN) indicates raster pixels not covered by the original STATSGO dataset. The COGs also include non-physical values of -0.1, which were used by the source STATSGO archive to mark large water bodies. The COG format uses compression internally to reduce file size. As such, reading large portions of a COG into memory can require much more RAM than the nominal file size. The COGs in this dataset will require ~60GB of memory to read in full. This dataset can be reproduced by running the included `rasterize_statsgo.py` Python script. Please refer to the script for documentation and usage instructions. Disclaimer: Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government. References: Schwarz, G.E. and Alexander, R.B., 1995, Soils data for the Conterminous United States Derived from the NRCS State Soil Geographic (STATSGO) Data Base. [Original title: State Soil Geographic (STATSGO) Data Base for the Conterminous United States.]: U.S. Geological Survey data release, https://doi.org/10.5066/P94JAULO.

This data release reformats data fields from the STATSGO soil characteristics dataset (Schwarz and Alexander, 1995) as cloud-optimized GeoTIFFs (COGs). The COG format allows standard software tools to efficiently access the datasets over an internet connection. Please refer to the documentation of the source archive (Schwarz and Alexander, 1995) for additional details on the underlying dataset. This data release includes COGs for the KF-factor (KFFACT) and soil thickness (THICK) data fields. KF-factors are defined as the saturated hydraulic conductivity of the fine soil (< 2mm) fraction in units of inches per hour. The soil thickness dataset has units of inches. Each COG raster spans the continental US at a nominal 30 meter resolution. The spatial reference is EPSG:5069. Each COG uses a float32 precision, and the NoData value (NaN) indicates raster pixels not covered by the original STATSGO dataset. The COGs also include non-physical values of -0.1, which were used by the source STATSGO archive to mark large water bodies. The COG format uses compression internally to reduce file size. As such, reading large portions of a COG into memory can require much more RAM than the nominal file size. The COGs in this dataset will require ~60GB of memory to read in full. This dataset can be reproduced by running the included `rasterize_statsgo.py` Python script. Please refer to the script for documentation and usage instructions. Disclaimer: Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government. References: Schwarz, G.E. and Alexander, R.B., 1995, Soils data for the Conterminous United States Derived from the NRCS State Soil Geographic (STATSGO) Data Base. [Original title: State Soil Geographic (STATSGO) Data Base for the Conterminous United States.]: U.S. Geological Survey data release, https://doi.org/10.5066/P94JAULO.