Total ozone Level 2 files provide ozone information at TEMPO’s native spatial resolution, ~10 km^2 at the center of the Field of Regard (FOR), for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The files are provided in netCDF4 format, and contain information on total column ozone and some auxiliary derived and ancillary input parameters including N-values, effective Lambertian scene-reflectivity, UV aerosol index, SO2 index, effective cloud fraction, effective cloud pressure, radiative cloud fraction, ozone below clouds, terrain height, geolocation, solar and satellite viewing angles, and quality flags. The retrieval is based on the OMI TOMS V8.5 algorithm adapted for TEMPO. These data reached provisional validation on December 9, 2024.

Total ozone Level 3 files provide ozone information on a regular grid covering the TEMPO field of regard for nominal TEMPO observations. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle. The files are provided in netCDF4 format, and contain information on total column ozone and some auxiliary derived and ancillary input parameters including effective cloud fraction, effective cloud pressure, radiative cloud fraction, SO2 index, and terrain pressure. The re-gridding algorithm uses an area-weighted approach. These data reached provisional validation on December 9, 2024.

Formaldehyde Level 2 files provide trace gas information at TEMPO’s native spatial resolution, ~10 km^2 at the center of the Field of Regard (FOR), for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The files are provided in netCDF4 format, and contain information on vertical columns, ancillary data used in air mass factor calculations and reference sector corrections, and retrieval quality flags. The retrieval uses a three-step approach: (1) spectral fitting of slant columns, (2) air mass factor calculation and derivation of vertical columns, and (3) reference sector corrections. These data reached provisional validation on December 9, 2024.

Nitrogen dioxide Level 2 files provide trace gas information at TEMPO’s native spatial resolution, ~10 km^2 at the center of the Field of Regard (FOR), for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The files are provided in netCDF4 format, and contain information on tropospheric, stratospheric and total nitrogen dioxide vertical columns, ancillary data used in air mass factor and stratospheric/tropospheric separation calculations, and retrieval quality flags. The retrieval uses a three-step approach: (1) spectral fitting of slant columns, (2) air mass factor calculation and derivation of vertical columns, and (3) stratospheric/tropospheric separation. These data reached provisional validation on December 9, 2024.

Nitrogen dioxide Level 3 files provide trace gas information on a regular grid covering the TEMPO field of regard for nominal TEMPO observations. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle. The files are provided in netCDF4 format, and contain information on tropospheric, stratospheric and total nitrogen dioxide vertical columns, ancillary data used in air mass factor and stratospheric/tropospheric separation calculations, and retrieval quality flags. The re-gridding algorithm uses an area-weighted approach. These data reached provisional validation on December 9, 2024.

The Nimbus-4 BUV Level 2 High-Density Ozone Data collection contains the vertical distribtuion and total column amount of ozone, as well as the full set of ancillary information. Each file contains total ozone, reflectivities, ozone mixing ratios and layer ozone amounts measured every 32 seconds during the daylit portion of an orbit. Mixing ratios are given at 19 levels: 0.3, 0.4, 0.5, 0.7, 1, 1.5, 2, 3, 4, 5, 7, 10, 15, 20, 30, 40, 50, 70 and 100 mbar. Layer ozone amounts are provided at 12 layers: 0.24, 0.49, 0.99, 1.98, 3.96, 7.92, 15.8, 31.7, 63.3, 127, 253, and 1013 mbar (bottom of layer value). The data collection also contains quality flags, orbital information, and housekeeping data.The data were originally created on IBM 360 machines and archived on magnetic tapes. The data have been restored from the tapes and are now archived on disk in their original IBM binary file format. Each file contains about one orbit of data. The files consist of data records each with two hundred and seven 4-byte words. The first record is the header record, followed by a series of data records, and ends with several trailer records that pad out the original blocked records. A typical orbit file is about 96 kB in size.The BUV instrument was operational from April 10, 1970 until May 6, 1977. In July 1972 the Nimbus-4 solar power array partially failed such that BUV operations were curtailed. Thus data collected in the later years was increasingly sparse, particularly in the equatorial region.This product was previously available from the NSSDC as the Total and Profile Ozone Data (HDBUV) with the identifier ESAC-00030 (old ID 70-025A-05Q).

This Nimbus-7 Total Ozone Mapping Spectrometer (TOMS) version 8 daily global gridded data product contains total column ozone values. The data are mapped to a global grid of size 180 x 288 with a lat-long resolution of 1.00 x 1.25 degrees. These data are stored in an ASCII format.The TOMS data were produced by the Laboratory for Atmospheres at NASA Goddard Space Flight Center (Code 614).

Formaldehyde Level 3 files provide trace gas information on a regular grid covering the TEMPO field of regard for nominal TEMPO observations. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle. The files are provided in netCDF4 format, and contain information on formaldehyde vertical columns, ancillary data used in air mass factor calculations and reference sector or de-striping corrections, and retrieval quality flags. The re-gridding algorithm uses an area-weighted approach. These data reached provisional validation on December 9, 2024.

This Nimbus-7 Total Ozone Mapping Spectrometer (TOMS) version 8 monthly averaged global gridded data product contains total column ozone values. The data are mapped to a global grid of size 180 x 288 with a lat-long resolution of 1.00 x 1.25 degrees. These data are stored in an ASCII format.The TOMS data were produced by the Laboratory for Atmospheres at NASA Goddard Space Flight Center (Code 614).

Nitrogen dioxide Level 2 files provide trace gas information at TEMPO’s native spatial resolution, ~10 km^2 at the center of the Field of Regard (FOR), for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The files are provided in netCDF4 format, and contain information on tropospheric, stratospheric and total nitrogen dioxide vertical columns, ancillary data used in air mass factor and stratospheric/tropospheric separation calculations, and retrieval quality flags. The retrieval uses a three-step approach: (1) spectral fitting of slant columns, (2) air mass factor calculation and derivation of vertical columns, and (3) stratospheric/tropospheric separation. These data reached provisional validation on December 9, 2024.