TOLNet_LaRC_Data is the lidar data collected by the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC) as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing. In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of six Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidar, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), is a fixed system. TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TOLNet_GSFC_Data is the lidar data collected by the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC) as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing. In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of six Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidar, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), is a fixed system. TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TOLNet_CSL_Data is the lidar data collected by the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing. In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of six Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidar, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), is a fixed system. TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TOLNet_UAH_Data is the lidar data collected by the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing. In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of six Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidar, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), is a fixed system. TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TOLNet_ECCC_Data is the lidar data collected by the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing. In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of six Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidar, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), is a fixed system. TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TOLNet_CCNY_Data is the lidar data collected by the New York Tropospheric Ozone Lidar System (NYTOLS) at the City College of New York (CCNY) as part of the Tropospheric Ozone Lidar Network (TOLNet). Data collection for this product is ongoing. In the troposphere, ozone is considered a pollutant and is important to understand due to its harmful effects on human health and vegetation. Tropospheric ozone is also significant for its impact on climate as a greenhouse gas. Operating since 2011, TOLNet is an interagency collaboration between NASA, NOAA, and the EPA designed to perform studies of air quality and atmospheric modeling as well as validation and interpretation of satellite observations. TOLNet is currently comprised of seven Differential Absorption Lidars (DIAL). Each of the lidars are unique, and some have had a long history of ozone observations prior to joining the network. Five lidars are mobile systems that can be deployed at remote locations to support field campaigns. This includes the Langley Mobile Ozone Lidar (LMOL) at NASA Langley Research Center (LaRC), the Tropospheric Ozone (TROPOZ) lidar at the Goddard Space Flight Center (GSFC), the Tunable Optical Profile for Aerosol and oZone (TOPAZ) lidar at the NOAA Chemical Sciences Laboratory (CSL) in Boulder, Colorado, the Autonomous Mobile Ozone LIDAR instrument for Tropospheric Experiments (AMOLITE) lidar at Environment and Climate Change Canada (ECCC) in Toronto, Canada, and the Rocket-city O3 Quality Evaluation in the Troposphere (RO3QET) lidar at the University of Alabama in Huntsville, Alabama. The remaining lidars, the Table Mountain Facility (TMF) tropospheric ozone lidar system located at the NASA Jet Propulsion Laboratory (JPL), and City College of New York (CCNY) New York Tropospheric Ozone Lidar System (NYTOLS) are fixed systems. TOLNet seeks to address three science objectives. The primary objective of the network is to provide high spatio-temporal measurements of ozone from near the surface to the top of the troposphere. Detailed observations of ozone structure allow science teams and the modeling community to better understand ozone in the lower-atmosphere and to assess the accuracy and vertical resolution with which geosynchronous instruments could retrieve the observed laminar ozone structures. Another objective of TOLNet is to identify an ozone lidar instrument design that would be suitable to address the needs of NASA, NOAA, and EPA air quality scientists who express a desire for these ozone profiles. The third objective of TOLNET is to perform basic scientific research into the processes create and destroy the ubiquitously observed ozone laminae and other ozone features in the troposphere. To help fulfill these objectives, lidars that are a part of TOLNet have been deployed to support nearly ten campaigns thus far. This includes campaigns such as the Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) mission, the Korea United States Air Quality Study (KORUS-AQ), the Tracking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ) campaign, the Front Range Air Pollution and Photochemistry Éxperiment (FRAPPÉ), the Long Island Sound Tropospheric Ozone Study (LISTOS), and the Ozone Water–Land Environmental Transition Study (OWLETS).

TL2MTLNS_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Methanol Nadir Special Observation Version 7 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 4,608 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.” A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were processed independently. Thus, each limb standard product consisted of three sets where each set consisted of 1,152 observations. For TES, the swath object represented one of these sets.

TOTE-VOTE_Ground_Data_1 is the ground site data collected as part of the Tropical Ozone Transport Experiment – Vortex Ozone Transport Experiment (TOTE-VOTE) campaign. Data featured in the product includes data from the NASA GSFC Stratospheric Ozone Lidar Trailer Experiment (STROZ-LITE) at Mauna Loa, and the JPL Table Mountain Facility, Mauna Loa Lidar. Data collection for this product is complete. The Tropical Ozone Transport Experiment – Vortex Ozone Transport Experiment (TOTE-VOTE) campaign was conducted by NASA from December 1995 to February 1996. TOTE-VOTE took place in the Pacific region with the goal of gaining a better understanding of background transport processes from tropical/polar regions to midlatitudes. Nineteen flights were conducted using the NASA DC-8 aircraft and balloon sondes with the purpose of measuring the transport of filaments of air moved in or out of the arctic polar vortex and the tropical stratospheric reservoir. TOTE-VOTE also utilized ground-based instruments along with aircrafts. Various instrumentation was used during TOTE-VOTE in order to achieve the mission objectives. The DC-8 aircraft was equipped with the NCAR NOxyO3 instrument, the NASA Langley Airborne Differential Absorption Lidar (DIAL) system, the Forward Scattering Spectrometer Probe (FSSP), the Microwave Temperature Profiler (MTP), the Multiple-Angle Aerosol Spectrometer Probe (MASP), and the diode laser spectrometer system, historically known as the Differential Absorption Carbon monOxide Measurement (DACOM). The NCAR NOxyO3 is a type of 4-channel chemiluminescence instrument that was used to quantify NOx (NO and NO2), NOy (total reactive nitrogen), and ozone (O3) in the air. The DIAL system used four lasers to make DIAL O3 profiles, along with collecting data on aerosol backscattering, aerosol depolarization ratio, aerosol extinction, and aerosol optical depth. The FSSP is an optical particle counter that measured particle size distribution. The MTP is a passive microwave radiometer that measured natural thermal emissions and was used during TOTE-VOTE to record temperature. The MASP spectrometer collected in-situ measurements of particle concentration, particle size distribution, and particle extinction. Along with the MASP’s in-situ measurements, the DACOM spectrometer utilized three diode lasers at different wavelengths to take in-situ measurements of N2O, CO, CH4, and CO2 for TOTE-VOTE. Ground-based instruments collected lidar data while balloon sondes gathered information on wind direction, wind speed, atmospheric pressure, and air temperature.

TL2MTLN_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Methanol Nadir Version 7 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. It consisted of information for one molecular species for an entire Global Survey or Special Observation. TES Level 2 data contains retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir and limb observations were in separate L2 files, and a single ancillary file was composed of data that were common to both nadir and limb files. A nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consisted of four files, where each file was composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 4,608 retrievals were performed (1,152 nadir retrievals and 1,152 retrievals in time ordered sequence for each limb observation). Each observation was the input for retrievals of species volume mixing ratios (VMRs), temperature profiles, surface temperature and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging is employed. Also, missing or bad retrievals were not reported. The organization of data within the Swath object was based on a superset of the Upper Atmosphere Research Satellite (UARS) pressure levels that was used to report concentrations of trace atmospheric gases. The reporting grid was the same pressure grid used for modeling. There were 67 reporting levels from 1211.53 hPa, which allowed for very high surface pressure conditions, to 0.1 hPa, about 65 km. In addition, the products reported values directly at the surface when possible or at the observed cloud top level. Thus in the Standard Product files each observation could potentially contain estimates for the concentration of a particular molecule at 67 different pressure levels within the atmosphere. However, for most retrieved profiles, the highest pressure levels were not observed due to a surface at lower pressure or cloud obscuration. For pressure levels corresponding to altitudes below the cloud top or surface, where measurements were not possible, a fill value was

STRAT_Ground_Data is the ground site data collected during the Stratospheric Tracers of Atmospheric Transport (STRAT) campaign. Data from the JPL ozone lidar at Mauna Loa and Table Mountain, the Composition and Photo-Dissociative Flux Measurement (CPFM), and the Airborne Raman Ozone, Temperature, and Aerosol Lidar (AROTAL) are featured in this collection. Data collection for this product is complete. The STRAT campaign was a field campaign conducted by NASA from May 1995 to February 1996. The primary goal of STRAT was to collect measurements of the change of long-lived tracers and functions of altitude, latitude, and season. These measurements were taken to aid with determining rates for global-scale transport and future distributions of high-speed civil transport (HSCT) exhaust that was emitted into the lower atmosphere. STRAT had four main objectives: defining the rate of transport of trace gases from the stratosphere and troposphere (i.e., HSCT exhaust emissions), improving the understanding of dynamical coupling rates for transport of trace gases between tropical regions and higher latitudes and lower altitudes (between tropical regions, higher latitudes, and lower altitudes are where most ozone resides), improving understanding of chemistry in the upper troposphere and lower stratosphere, and finally, providing data sets for testing two-dimensional and three-dimensional models used in assessments of impacts from stratospheric aviation. To accomplish these objectives, the STRAT Science Team conducted various surface-based remote sensing and in-situ measurements. NASA flew the ER-2 aircraft along with balloons such as ozonesondes and radiosondes just below the tropopause in the Northern Hemisphere to collect data. Along with the ER-2 and balloons, NASA also utilized satellite imagery, theoretical models, and ground sites. The ER-2 collected data on HOx, NOy, CO2, ozone, water vapor, and temperature. The ER-2 also collected in-situ stratospheric measurements of N2O, CH4, CO, HCL, and NO using the Aircraft Laser Infrared Absorption Spectrometer (ALIAS). Ozonesondes and radiosondes were also deployed to collect data on CO2, NO/NOy, air temperature, pressure, and 3D wind. These balloons also took in-situ measurements of N2O, CFC-11, CH4, CO, HCL, and NO2 using the ALIAS. Ground stations were responsible for taking measurements of O3, ozone mixing ratio, pressure, and temperature. Satellites took infrared images of the atmosphere with the goal of aiding in completing STRAT objectives. Pressure and temperature models were created to help plan the mission.