This web service contains the following layer: PM10 Nonattainment Areas (1987 NAAQS). Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NAA1987PM10/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www.epa.gov/approved-sips/regional-sip-coordinators. Questions concerning the status of nonattainment areas, their classification and EPA policy should be directed to the appropriate Regional Offices

This web service contains the following state level layers:Ozone 8-hr (1997 standard), Ozone 8-hr (2008 standard), Lead (2008 standard), SO2 1-hr (2010 standard), PM2.5 24hr (2006 standard), PM2.5 Annual (1997 standard), PM2.5 Annual (2012 standard), PM10 (1987 standard), and CO (1990 standard). Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NonattainmentAreas/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to:

This web service contains the following state level layers:Ozone 8-hr (1997 standard), Ozone 8-hr (2008 standard), Lead (2008 standard), SO2 1-hr (2010 standard), PM2.5 24hr (2006 standard), PM2.5 Annual (1997 standard), PM2.5 Annual (2012 standard), PM10 (1987 standard), and CO (1990 standard). Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NonattainmentAreas/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to:

This web service contains the following layer: PM2.5 Annual 2012 NAAQS State Level. Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NAA2012PM25Annual/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www3.epa.gov/airquality/greenbook/index.html. Questions concerning the status of nonattainment areas, their classification and EPA policy should be directed to the appropriate Regional Offices

This web service contains the following layers: PM2.5 Annual 1997 NAAQS State Level and PM2.5 Annual 1997 NAAQS National . It also contains the following tables: maps99.FRED_MAP_VIEWER.%fred_area_map_data and maps99.FRED_MAP_VIEWER.%fred_area_map_view. Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NAA1997PM25Annual/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as “attainment” (meeting), “nonattainment” (not meeting), or “unclassifiable” (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www3.epa.gov/airquality/greenbook/index.html. Questions

This web service contains the following layers: PM2.5 Annual 1997 NAAQS State Level and PM2.5 Annual 1997 NAAQS National . It also contains the following tables: maps99.FRED_MAP_VIEWER.%fred_area_map_data and maps99.FRED_MAP_VIEWER.%fred_area_map_view. Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NAA1997PM25Annual/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as “attainment” (meeting), “nonattainment” (not meeting), or “unclassifiable” (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www3.epa.gov/airquality/greenbook/index.html. Questions

This web service contains the following layer: SO2 2010 NAAQS State Level. Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NAA2010SO21hour/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www3.epa.gov/airquality/greenbook/index.html. Questions concerning the status of nonattainment areas, their classification and EPA policy should be directed to the appropriate Regional Offices

This web service contains the following layers: Lead NAA 2008 NAAQS and Lead NAA Centroids 2008 NAAQS. Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NAA2008Lead/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www3.epa.gov/airquality/greenbook/index.html. Questions concerning the status of nonattainment areas, their classification and EPA policy should be directed to the appropriate Regional Offices

This web service contains the following layers: PM2.5 24hr 2006 NAAQS State Level and PM2.5 24hr 2006 NAAQS National. Full FGDC metadata records for each layer may be found by clicking the layer name at the web service endpoint (https://gispub.epa.gov/arcgis/rest/services/OAR_OAQPS/NAA2006PM2524hour/MapServer) and viewing the layer description. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www3.epa.gov/airquality/greenbook/index.html. Questions concerning the status of nonattainment areas, their classification and EPA policy should be directed to the appropriate Regional Offices

This downloadable data package contains the following state level layers: Ozone 8-hr (1997 standard), Ozone 8-hr (2008 standard), Lead (2008 standard), SO2 1-hr (2010 standard), PM2.5 24hr (2006 standard), PM2.5 Annual (1997 standard), PM2.5 Annual (2012 standard), and PM10 (1987 standard). Included in this package are a file geodatabase and full FGDC metadata records for each layer. These layers identify areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for criteria air pollutants and have been designated "nonattainment” areas (NAA)". The data are updated weekly from an OAQPS internal database. However, that does not necessarily mean the data have changed. The EPA Office of Air Quality Planning and Standards (OAQPS) has set National Ambient Air Quality Standards for six principal pollutants, which are called "criteria" pollutants. Under provisions of the Clean Air Act, which is intended to improve the quality of the air we breathe, EPA is required to set National Ambient Air Quality Standards for six common air pollutants. These commonly found air pollutants (also known as "criteria pollutants") are found all over the United States. They are particle pollution (often referred to as particulate matter), ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. For each criteria pollutant, there are specific procedures used for measuring ambient concentrations and for calculating long-term (quarterly or annual) and/or short-term (24-hour) exposure levels. The methods and allowable concentrations vary from one pollutant to another, and within NAAQS revisions for each pollutant. These pollutants can harm your health and the environment, and cause property damage. Of the six pollutants, particle pollution and ground-level ozone are the most widespread health threats. EPA calls these pollutants "criteria" air pollutants because it regulates them by developing human health-based and/or environmentally-based criteria (science-based guidelines) for setting permissible levels. The set of limits based on human health is called primary standards. Another set of limits intended to prevent environmental and property damage is called secondary standards. A geographic area that meets or does better than the primary standard is called an attainment area; areas that don't meet the primary standard are called nonattainment areas. In some cases, a designated nonattainment area can include portions of 2, 3, or 4 states rather than falling entirely within a single state. Multi-state areas have had different state portions handled through up to 3 separate EPA regional offices. The actions of EPA and the state governments for separate portions of such areas are not always simultaneous. While some areas have had coordinated action from all related states on the same day, other areas (so-called "split areas") have had delays of several months, ranging up to more than 2 years, between different states. EPA must designate areas as meeting (attainment) or not meeting (nonattainment) the standard. A designation is the term EPA uses to describe the air quality in a given area for any of the six common air pollutants (criteria pollutants). After EPA establishes or revises a primary and/or secondary National Ambient Air Quality Standard (NAAQS), the Clean Air Act requires EPA to designate areas as "attainment" (meeting), "nonattainment" (not meeting), or "unclassifiable" (insufficient data) after monitoring data is collected by state, local and tribal governments. Once nonattainment designations take effect, the state and local governments have three years to develop implementation plans outlining how areas will attain and maintain the standards by reducing air pollutant emissions. For further information please refer to: https://www3.epa.gov/airquality/greenbook/index.html. Questions concerning the status of nonattainment areas, their classification and EPA policy should be