Utah FORGE: Earth Model Mesh Data for Selected Surfaces

공공데이터포털

This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter DEM), the granitoid-basin fill contact, several faults, and also interpolated temperature isosurfaces for 175 and 225 degrees C. All data are georeferenced to UTM, zone 12N, NAD 83, NAVD 88.

Utah FORGE: Data for 3-D Model Development - Lithology, Temperature, Pressure, and Stress

공공데이터포털

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. The Initial Conditions .zip download contains data regarding temperature, pressure, and stress. These data were generated during Utah FORGE Phase 2 and exported from Seequent Leapfrog Geothermal. They are intended for use in 3-D earth modeling.

Utah FORGE: Data for 3-D Model Development - Lithology, Temperature, Pressure, and Stress

공공데이터포털

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. The Initial Conditions .zip download contains data regarding temperature, pressure, and stress. These data were generated during Utah FORGE Phase 2 and exported from Seequent Leapfrog Geothermal. They are intended for use in 3-D earth modeling.

Utah FORGE: Area LiDAR Bare Earth DEM Mosaic

공공데이터포털

This is a mosaic of 154 bare earth DEM panels (0.5 m resolution) acquired during Phase II of the Utah FORGE project. The DEM covers the western Mineral Mountains and adjoining basin including the Roosevelt Hot Springs area. The coordinates are in UTM Zone 12, NAD 83 and elevation units are in meters. The DEM is in GeoTiff format.

Utah FORGE: Geologic, Topographic, and Other Related Maps and GIS Data from the Earth Model

공공데이터포털

This submission contains a number of maps and shapefiles related to the Utah FORGE site. Examples include geologic maps (several variations) and GIS data for the Utah FORGE site outline. All data are georeferenced to UTM, zone 12N, NAD 83, NAVD 88.

Utah FORGE: Geologic, Topographic, and Other Related Maps and GIS Data from the Earth Model

공공데이터포털

This submission contains a number of maps and shapefiles related to the Utah FORGE site. Examples include geologic maps (several variations) and GIS data for the Utah FORGE site outline. All data are georeferenced to UTM, zone 12N, NAD 83, NAVD 88.

Utah FORGE: Area 0.5 m LiDAR Data

공공데이터포털

During the Fall of 2016 AGRC and the Utah Geological Survey acquired ~205 square miles of 8 points per meter Quality Level 1 LiDAR of The Frontier Observatory for Research in Geothermal Energy (FORGE) area around Milford, Utah in Beaver and Millard Counties in western Utah. The 0.5 meter resolution bare earth DEMs and first-return/highest-hit DSMs in .img format have a 10.0cm vertical RMSE accuracy and are available for download. The LAS classified point clouds are also available by request Rick Kelson from AGRC at RKelson@utah.gov or The National Map. This elevation data was collected between October 26 and November 3, 2016 and has a UTM NAD83 (2011) zone 12 north meter NAVD88(GEOID12) projection.

Utah FORGE: Area 0.5 m LiDAR Data

공공데이터포털

During the Fall of 2016 AGRC and the Utah Geological Survey acquired ~205 square miles of 8 points per meter Quality Level 1 LiDAR of The Frontier Observatory for Research in Geothermal Energy (FORGE) area around Milford, Utah in Beaver and Millard Counties in western Utah. The 0.5 meter resolution bare earth DEMs and first-return/highest-hit DSMs in .img format have a 10.0cm vertical RMSE accuracy and are available for download. The LAS classified point clouds are also available by request Rick Kelson from AGRC at RKelson@utah.gov or The National Map. This elevation data was collected between October 26 and November 3, 2016 and has a UTM NAD83 (2011) zone 12 north meter NAVD88(GEOID12) projection.

Utah FORGE: Area Terrain Slope Data

공공데이터포털

This archive contains a terrain slope image, in units of degrees, of the Utah FORGE area near Roosevelt Hot springs. The data was derived from 0.5 m resolution LiDAR DEM data and is in a GeoTiff format. It was processed using ArcGIS.

Utah FORGE: Area Terrain Slope Data

공공데이터포털

This archive contains a terrain slope image, in units of degrees, of the Utah FORGE area near Roosevelt Hot springs. The data was derived from 0.5 m resolution LiDAR DEM data and is in a GeoTiff format. It was processed using ArcGIS.