Utah FORGE: Seismic Activity from April, 2019

공공데이터포털

This dataset contains seismic event detections acquired using the 151 Nodal geophones deployed at the Utah FORGE site in April 2019. Details regarding the publishing are available in the paper linked below (Mesimeri, M. and K. L. Pankow et al. 2020). A frequency-domain-based algorithm for detecting induced seismicity using dense surface seismic arrays, Geophys. J. Int, submitted.

Utah FORGE: Seismic Event Catalogue from the April, 2022 Stimulation of Well 16A(78)-32

공공데이터포털

This dataset includes earthquake catalogues for the three stages of the 2022 well 16A(78)-32 stimulation provided by Geo Energie Suisse. Events in these catalogues have been visually inspected. There are additional events of lower signal to noise that were automatically detected. Those events will require additional analysis and processing. Times are recorded in UTC (Coordinate Universal Time), and the coordinate reference system is UTM Zone 12N, NAD83.

Utah FORGE: Seismic Event Catalogue from the April, 2022 Stimulation of Well 16A(78)-32

공공데이터포털

This dataset includes earthquake catalogues for the three stages of the 2022 well 16A(78)-32 stimulation provided by Geo Energie Suisse. Events in these catalogues have been visually inspected. There are additional events of lower signal to noise that were automatically detected. Those events will require additional analysis and processing. Times are recorded in UTC (Coordinate Universal Time), and the coordinate reference system is UTM Zone 12N, NAD83.

Utah FORGE: Source Imaging DAS-Based Seismic Event Catalog - April 2024 Stimulation

공공데이터포털

This catalog contains microseismic event locations recorded during the April 2024 stimulation at the Utah FORGE site. Events were detected and located using a DAS-specific source imaging workflow that avoids conventional phase picking. Instead, STA/LTA-transformed DAS and downhole geophone traces were back-propagated through a calibrated 1D velocity model to generate a coherency field across a 3D subsurface grid. Events were identified at locations where P- and S-wave back-projections constructively aligned, and associated uncertainties were estimated from the spatial coherency distribution.

Utah FORGE: Seismicity Associated with the 2019 Well 58-32 Stimulation

공공데이터포털

This catalog describes the seismicity associated with the 2019 stimulation at Utah FORGE. Containing both matched-filter detections (Dzubay et al., 2022) and Schlumberger-recorded events (detected with a 12-level geophone string), the final combined catalog contains a total of 534 microseismic events spanning -2.0 Mw to -0.1 Mw. Users may differentiate between SLB and MF events using the fact that SLB event magnitudes are recorded to a higher level of precision (MF mags determined using relative amplitude ratios). Users should be wary of locations and depths (measured from sea level) for MF events, as all detections were assigned the same locations as their template events.

Utah FORGE: 2024 Stimulations Microseismic Event Catalog from Seismic Surface Network

공공데이터포털

This archive provides a a link to a microseismic event catalog of the 2024 stimulations at Utah FORGE. The catalog was derived from data collected with the surface monitoring network consisting of 5 permanent seismic stations deployed by the University of Utah Seismograph Stations and a temporary deployment of 144 nodal geophones. The local coordinate system is relative to well 16A(78)-32 (lat=38.50402147, lon=-112.8963897, elev=1650m NAD 83). The magnitudes in this catalog were calibrated based on the local magnitude provided by the University of Utah Seismograph Stations and are not authoritative. The catalog and its compilation are described in Niemz et al. (2024), which is linked below.

Utah FORGE DAS Seismic Data 2022

공공데이터포털

This is a link to the website where DAS seismic data, collected from wells 78-32 and 78B-32 during the Utah FORGE 2022 stimulation, is now available for download. The data can be accessed at "Well 16A78-32 2022 Stimulation Seismicity Data" link in the submission under the Silixa heading. The page includes surface acquisition nodal datasets, downhole geophone data, and Silixa fiber data. Raw seismic stimulation data and the scripts to process this data is under the Silixa heading.

Utah FORGE: 2D and 3D Seismic Data

공공데이터포털

This set of data contains raw and Initially-processed 2D and 3D seismic data from the Utah FORGE study area near Roosevelt Hot Springs. Reprocessed versions of these data can be accessed at the linked submission in the Resources section titled "Reprocessed Seismic Reflection Data." The zipped archives numbered from 1-100 to 1001-1122 contain 3D seismic uncorrelated shot gatherers SEG-Y files. The zipped archives numbered from 1-100C to 1001-1122C contain 3D seismic correlated shot gatherers SEG-Y files. Other data have intuitive names.

Utah FORGE: 2D and 3D Seismic Data

공공데이터포털

This set of data contains raw and Initially-processed 2D and 3D seismic data from the Utah FORGE study area near Roosevelt Hot Springs. Reprocessed versions of these data can be accessed at the linked submission in the Resources section titled "Reprocessed Seismic Reflection Data." The zipped archives numbered from 1-100 to 1001-1122 contain 3D seismic uncorrelated shot gatherers SEG-Y files. The zipped archives numbered from 1-100C to 1001-1122C contain 3D seismic correlated shot gatherers SEG-Y files. Other data have intuitive names.

Utah FORGE: Updated Seismic Event Catalogue from the April, 2022 Stimulation of Well 16A(78)-32

공공데이터포털

These are revised catalogs, related to the April, 2022 well 16A(78)-32 stimulation (phases 1,2, & 3), provided by Geo Energie Suisse (GES) that include additional events at the start of Stage 1 and some tidying up of some locations. These catalogs also include events for additional events that were auto-located to provide a larger dataset for statistical analyses, like b-value calculations. The actual auto-locations have been removed to prevent spurious location plots being created. Times are recorded in UTC (Coordinate Universal Time), and the coordinate reference system is UTM Zone 12N, NAD83.